Find an experienced handyman in Melbourne

Make a made to measure sliding fly screen.

Blinds fell off from wall, need someone who knows what they’re doing to reinstall them before a walkthrough. They were screwed on so may need to bring long screws to re-install.

The door runner has been busted and needs to be fixed. I have a video but can’t post it - I will send it once I have accepted a tasker.

I need a hole in my wall repaired might require paint which I have, and some sanding to clean it up. I have a photo

Plaster fix on a high ceiling (will need scaffolding). Patch and paint. Damaged area to be replaced around 1200x700 and plaster looks like 13mm.

Need a handyman to fix a glass sliding door handle which has become loose. The latch also isn’t moving and is jammed on open

Looking for someone to disassemble a home gym and move it from South Yarra to Toorak and reassemble

Looking for an experienced carpenter or professional handyperson to install a wall-mounted flip-up toilet grab bar (modunful brand, see product link below) next to the toilet. The grab bar has an integrated floor support leg, but the wall plate must be anchored securely to the wall. Product: https://www.amazon.co.uk/dp/B0CGW8DCW7 (supplied) Requirements: • Wall Type: Hollow/plasterboard wall behind finished ceramic subway tiles. You will need a reliable stud finder to locate the timber framing or noggins. • Tools Needed: Must bring your own diamond-tipped or carbide-tipped tile drill bits to drill through the subway tiles cleanly without cracking them. Heavy-duty wall anchors/timber screws are required. • Placement: Position needs to clear an existing floor plumbing pipe and fold away horizontally to clear a shelf above. I can provide the installation dimensions and manual. Please let me know your experience with drilling tiles and mounting safety rails when you offer. Thanks!

Toilet seat in the bathroom is loose. I removed the seat and found that one of the fixing bolts is loose and just spins when I try to tighten it. It also won’t come out easily. Looking for someone to remove/replace the faulty fixing and securely reinstall the toilet seat so it doesn’t move. Please see attached photos. Happy for you to supply the required replacement fixing/parts.

Looking for someone to install/fix a roller blind bracket securely to the wall. I already have the roller blind and all the required parts/brackets, I just need someone with the right tools to drill and fix the bracket to the wall properly. The blind itself then just slots into the bracket. The current bracket (pictured; in black), is broken. Should be a quick, straightforward job for someone skilled at general wall mounting.

Looking for someone to install 4 small wooden floating shelves on an internal wall in my Carlton apartment. Each shelf is approx. 40 cm wide × 15 cm deep and comes with its 2 mounting brackets, screws and wall plugs/fixings. All hardware for the shelves is supplied and pictured. You’ll just need to bring your own drill and level/tools required for installation. The wall has brick-look wallpaper — it is NOT a brick wall. The shelves will only hold lightweight boxed Funko Pops/collectibles. I’ll have the positions decided before you arrive. Looking for someone to measure, level and securely install all four. Budget is $100 total for the complete job. No additional material/fixing costs. Located in Carlton. Apartment access is easy and timing is flexible.

Two panels of flyscreen in old door damaged and need replacing without damaging the door.

Looking for an experienced plasterer/painter to repair several large holes in internal walls caused by impact damage. The job includes: - Repairing and patching the damaged plaster/gyprock walls - Sanding and preparing the repaired areas - Matching the existing wall finish - Priming where required - Repainting the repaired areas/walls Some holes are quite large, so proper plasterboard repair may be required rather than just filling. Please bring your own tools and let me know if materials are included in your offer. Looking for someone experienced who can leave a clean, professional finish. Location: Melbourne

Fix my bed please- it squeaks like crazy and it’s driving me insane! Give me your best advice / plan It’s the bed in the picture, yes I know it’s a selfie.. don’t judge me haha Wooden frame, needs longer screws for header and base, there’s 2 holes but a third is possible as well just can’t get to it easy and may also require some sort of cutting wood (maybe) Also screw slats in to side boards so that they don’t move either. My availability is this Sun to Monday before 10am. Or Tuesday/Wednesday any time during the day. Budget Neg. I don’t know what it costs to fix a bed. Honestly don’t mind the cost.. would rather pay more for a good job done well with good communication. 75 was my initial offering. I don’t have any of the screws/equipment needed. Hence the need for someone to come and do it for me pretty please. I’ll even throw in a coffee from the cafe around the corner while you work. Give me your best offer, and your coffee order and we got a deal. Will also post more photos and measurements for screws later tonight when I’m home.

Remove shelves from one wall in my garage and install on another wall . Armadale . Needs to be today

Hi, I need a local handyperson or plasterer for a quick patch-and-paint job. •3 x small paint chips and 3 larger paint chips (biggest is 7cm x 7cm) - requiring filling and sand flat. • poor attempt at patching has occurred • Paint area • Paint provided: | already have the matching original wall paint on-site. • Materials: Please bring your own plaster/filler, sandpaper, primer, and basic painting tools (brush/roller).

Install a brand new shower screen Size: 1200x2000 We have the fittings but unsure what’s required for the lip between tiled wall and microcement transition.

Small handyman job in Fitzroy North, finishing off the last details of a kitchen renovation. Work involves light sanding, applying gap filler, grouting a small area, siliconing, and painting a small area. Should be a couple of hours for someone experienced with these finishes. We'll supply the paint, gap filler and silicone, so you just need to bring your own tools. Happy to discuss specifics before you start.

Install outdoor roller blind on pergola beam, St Kilda (Fri or Sat) Description: I need an experienced handyman to install a new outdoor roller blind on our rooftop terrace in St Kilda. The blind: Outdoor roller blind with aluminium hood, polyester sunscreen fabric, charcoal grey 3.0 m wide x 2.5 m drop Already on site, still wrapped, with the supplied fixings bag Product page: https://budgetawnings.com.au/outdoor-blinds/78-257-outdoor-roller-blind-with-aluminium-hood-polyester.html The job Mount the blind, hood and brackets to the front side of the front pergola beam, centred between the two posts (see photo, arrows show the mounting points) The beam is painted timber and about 2.5 to 3 m off the deck Make sure the blind is level and rolls up and down smoothly Fit any tie-down or side anchor points if the kit includes them What you'll need to bring A stable ladder suitable for a tiled terrace Drill, driver, level and any extra fixings needed for a timber beam Access Rooftop terrace on an upper floor, reached through the apartment. The blind is light enough for two people to lift, and it's already on the terrace. Plus I can help. When: tomorrow (Friday 2 October) or Saturday 3 October. Please say which day and time suits you. Please include in your offer: Your experience installing outdoor or roller blinds A fixed price for the full install Your available time

I need someone to fit and supply and install a security screen on my front door. The current fly screen is falling off.