Find a professional sauna installation service in Melbourne

Assemble Waru 3 Person Traditional Finnish Outdoor Sauna in Natural. Must be available today

I need someone to put together a sauna: https://rejuvenex.au/products/outdoor-serenity-3-person-full-spectrum-infrared-sauna

I need someone to carfully dismantle a sauna (which came in flat panels) and stack down stairs in the carpark (I have trolley and lift). I have a cordless drill. Here’s the usual order: 1. Turn off and unplug * Disconnect the power. * Remove any loose items (floor mat, backrests, accessories). 2. Access the electrical connections * Most infrared saunas have quick-connect plugs between panels. * Remove the roof panel first (or lift it slightly) to expose the wiring. * Unplug the connectors—don’t pull on the wires. 3. Remove the roof * Many roofs simply lift off once any retaining screws or clips are removed. * It helps to have a second person. 4. Remove the glass door * Open it to about 90°. * Support the weight while removing the hinge screws. * Set it somewhere safe on a blanket. 5. Remove the front glass panel(s) * If there is a fixed glass side panel beside the door, remove any brackets or screws holding it. * Lift it straight up if it’s sitting in a channel. 6. Remove the timber wall panels * The side and rear panels are usually held together with external clips or cam locks. * Release these one at a time. * Lift each panel vertically to disengage it from the base. 7. Lift off the base (if needed) * Once the walls are removed, the base can usually be carried separately.

Max Infrared Full Spectrum Sauna being delivered and I need to have adequate power for it. It’s being installed outside. There’s a current double GPO there. Property has three phase - power box is around 20 m away in the middle of the property. Sauna: https://pluslifehealth.com.au/products/pluslife-outdoor-max-full-spectrum-sauna?variant=44078948286644#mobile-widget If you’re able to build the sauna for extra brownie points, please quote for that too.

Build Alpine 1 person Sauna. It's a clip lock together and say 1-2 hours on instructions https://alpinespas.com.au/saunas/infrared/oslo-1-2-person-indoor-infrared-sauna-gen2

Assemble Vista Mini Sauna in backyard https://alpinespas.com.au/saunas/traditional/vista-mini-4-person-outdoor-traditional-finnish-sauna Follow the Alpine Spa link to get the assembly instructions Sauna is currently delivered & stored in garage, will need to move pieces ~ 20 mtrs & put together in backyard. Plinth has already been installed ready for unit. Preferably someone with experience putting together home saunas. Please let me know when you can do the works with your offer

Need to replace circuit on sauna. Looking for a reliable electrician who can service around Coburg area

Assembly of sauna I need an SDS Sola 140 outdoor cube sauna assembled. It is a 450kg interlocking solid-timber kit with a glass front. The sauna will be on a deck .

Assemble dismantled infrared sauna.

Hi, I’m looking to engage a licensed electrician to install a new power line (~30m) along the external wall of a brick house to support an outdoor sauna. Run under gutter on exterior of house, held up with clips or equivalent into brick wall. I need a 32Amp for sauna, 10Amp for the lights. Scope includes supply and install, routing externally, and ensuring compliance with all relevant standards. Power requirements for the sauna can be provided.

Move sauna from one room to another. Will need to be disassembled and then reassembled

My sauna was flat pack and constructed by a team with mostly Allen keys. Here is a photo. I have the construction instructions. Could you please disassemble it and I will deliver it elsewhere myself. Thanks.

Just disable 2 small I created saunas and one sweedish sauna for moving.

I am looking for an electrician to install a dedicated 20 amp power point 240v / 14.6 amp I would like the new socket installed next to an exisiting 10A standard socket to use the same wall cavity if possible

Bring flat pack boxes from foyer to unit 25kg each box— 4 boxes Assemble sound flat pack I will be helping Model— regen8 trio - 3 person infrared sauna

Sauna not working won’t turn on

Hi - need someone experienced to clean, lightly sand, stain and seal the following: A. Front porch deck (approx 7m sq). B. Outdoor pergola. C. Small outdoor barrel sauna. I can provide 6 litres of decking oil (natural)but need you to bring all tools and rest of supplies needed. Thanks

We have a very cute wooden shed in our backyard but it’s just gathering dust. We’d love it to turn it into a home sauna. We have done lots of research, however don’t have the building skills to DIY this ourselves. we need to : - Seal the eaves/roof of the current shed - remove some of the shelves, etc that are in there already.( hopefully some of these materials can be used to build the seats.) - maybe replace 2 existing windows, unless we can get the glass replaced with tempered glass. - line the interior with special insulation and heat reflective foil - line with wooden planks - Remake the seats We will do all the sanding and painting, etc and organise the electrician separately. Would hopefully love to find someone who has ever made a sauna before if that’s at all possible! Otherwise we anticipate it would be about three-four full days work all things going well Budget $10 for a quote

I’m wanting someone to stain with an appropriate material that can be used on the front First side of the Sauna, I want it dark so that the wear and tear doesn’t look so bad. Also want the sides coded in paraffin oil.

Looking to have a sauna assembled post-delivery. https://alpinespas.com.au/saunas/traditional/lucca-sauna-3-person-outdoor-traditional-finnish-sauna Electrician enlisted to do the wiring separately, this is purely assembly. Has been indicated that the sauna will need rubber under it to support and level it +/- plastic shims, as the bluestone is slightly uneven. Photos of the area attached - Bikeshed has been removed. Sauna comes with all requisite parts.