Find an experienced handyman in St Kilda VIC

“Hi, I have a commercial cold room door. The door frame is damaged — the outer cover is broken and the insulation foam is exposed. The door seal may also not be closing properly. I need repair or replacement of the frame panel and sealing strip.” If you want to be more specific: * “Cold room door frame panel is cracked” * “Insulation exposed” * “Door gasket/seal might need replacement” * “Check door alignment and closing”

The existing seat is broken (see photos)- need to replace this seat with similar toilet seat with soft closure lid. It s D shape seat. Need supply and install the seat.

3.8 meters of cornice 3 internal joins 50mm cornice Supply and install 2 lengths total (1 x 1.6m & 1 x 2.2m) = 3.8m total

5 minute job- I just don’t own a drill Single screw came loose from cupboard hinge

Bathroom wall repair, painting + mirror cabinet install & resealing (2 bathrooms) Looking for an experienced handyman to: Repair damaged/peeling wall behind vanity (scrape, sand, fill, prime, paint) Paint in a warm beige colour (not white) Install a heavy mirror cabinet securely Cabinet will need to be cut at the back to allow for existing electrical outlet/wire Remove and redo silicone around shower, vanity, etc. Small bathrooms. After a clean, professional finish — not a quick patch job. Please bring tools and advise on materials. Photos attached.

Bathroom wall repair, painting (beige), cabinet/mirror install + resealing – 2 bathrooms I’m looking for an experienced handyman (ideally with plastering/carpentry experience) to complete work across two small bathrooms. 1. Wall repair & painting (behind vanity areas) * Scrape and remove all peeling/flaking paint and damaged plaster * Sand and properly prepare surfaces * Apply sealer/primer * Patch and smooth walls with filler * Sand to a smooth finish * Prime and repaint Paint colour will be a **warm beige/neutral tone (not white)** – I will confirm paint. 2. Install wall-mounted mirror/cabinet (heavy)** * Install a **heavy mirror cabinet** securely to the wall * Must be properly anchored (into studs or appropriate wall anchors) * A **cut-out is required in the back of the cabinet** to allow for an existing electrical outlet/cable point * Ensure clean, neat finish and correct alignment **3. Bathroom resealing (silicone)** * Remove old silicone where required * Reapply fresh silicone around: * Showers * Vanities/sinks * Any gaps needing sealing **Additional details:** * One wall has an existing electrical wire/outlet for hair tools – must be worked around carefully (do not remove or modify wiring) * Bathrooms are small * Looking for a **clean, professional finish** (not a quick patch job) Please bring your own tools. Let me know if you will supply materials or if I should. Photos attached. Preference for someone experienced with wall repairs, cabinet installation, and bathroom sealing. Please include photos of similar work if available.

Remove a small Plaster Bulk-Head concealing a water pipe (because the bulk-head is too big compared to the pipe) and patch and clean plaster between the pipe and the wall rather than have a bulk-head. See before and after photos attached showing the small pipe and the bulk head covering the pipe that is too bug and needs to be removed.

Hi there! We’re looking for a handy person to install a sliding-door dog door insert in our kitchen. We’ve just welcomed a new puppy 🐶 and need the pet door installed so he can safely go in and out. Is an aluminium-framed sliding door insert, constructed with tempered glass panels Fits directly into our existing sliding door frame Can be pressure mounted Includes all parts and an installation guide Product for reference: https://hakunapets.com.au/collections/pet-door/products/glass-patio-pet-door-2025#installation What we need: Install the supplied pet door into our existing sliding door Ensure it’s secure, level, and weather-sealed Bring your own tools Timing: Friday (tomorrow) is ideal I work from home and will be available all day Happy to provide photos or measurements of the door frame if helpful. Thanks!

need someone to supply and install a replacement latch on a wooden door. The handle is working fine — it’s just the latch below that’s broken, so the door is stuck shut as the latch is broken Looking for someone who can: • Supply a suitable replacement latch (like-for-like if possible) • Remove old latch and install new one • Ensure door closes securely and lines up properly • Minor alignment if needed Details: • Location: St Kilda • Door: Older wooden door • Flexible timing, sooner preferred

Hi there, My dog recently attacked my front door and I now need repair work done on this..! I need the side skirt board replaced and painted. Then the door filled and painted where it has been scratched. See images. Let me know if you have any further questions. Thanks, Brendan

We had to cut hole out under the sink and need it repaired.. Easy job, I just don’t want to stuff it up 😅

I bought a smart bidet toilet seat and my old housemate put it in. We kept the old one and I’ve moved out and want to take it with me and have the old toilet seat put back in. It’s just a matter of turning the two handles underneath to get the seat off and will need a wrench to remove the double adapter from the tap and reattach the pipe from the cistern to the tap and then putting the old one back on with the two handles underneath. Should only take 5 mins. Preferably anytime from now to 1pm as cleaners are coming at 1. Price negotiable

Need a window to be attached has just come off. And need a hand rail re attached. CCTV screwed into wall.

Looking for a Handy Person This Weekend I need a very small blind installed on a kitchen window (approx. 1.20 m wide/1.5m height) inside the frame or (1.35m) outside frame and 3–4 safety anchors fitted for blind cords in the same property. You will need to get product from spotlight or bunnings - we will reimburse purchase as well. Should be under $50 according to my research. Beige, oak preferred, but do not mind. Would love for the work to be done this weekend. Please get in touch if you can help. Thank you!

I purchased the blind below and need it to be hung in the kitchen window. It is too large to sit flush inside the window frame so will need to be drilled in to the wooden window frame https://www.spotlightstores.com/blinds/roller-blinds/double-roller-blinds/selections-dual-roller-blind/80425615?utm_source=spotlight-system&utm_medium=email&utm_campaign=ord-conf&utm_term=prod&utm_content=body

Install shower shelf in shower. Needs to be siliconed or drilled to wall.

The kitchen cupboard door hinge requires repair (the door cannot be closed), and the shower door hinge requires repair (the door can be closed, but in hot weather, it drops and cannot be closed, getting stuck).

Hi! I need a licensed electrician to remove 2 ceiling lights and install 2 new ceiling fans with lights (fans supplied). Apartment in St Kilda, plaster ceiling, existing wiring. I'm flexible with times but prefer ASAP as I have company staying with me soon :)

Assemble our shed, it is a 3.75m x 2.25m, all of the fixings are included in the shed pack. It will be assembled on a concrete slab and will need to be drilled into the slab to secure it.

Replace base of window frame and repair French door currently sagging