Find an experienced handyman in Carlton VIC

Crack in the kitchen has opened up and requires filling/repair. Previous tenant filled void with silicone which will have to be removed prior to plaster. Length of crack is approx 3m. Left over paint available if required to match with exisiting stucco wall.

**What I need:** Fix an internal sliding door that no longer closes fully — it stops about 1–2 cm short of the wall frame on the closing side. **Door type:** Top-hung sliding door (no bottom rail/guide). Two hanger brackets attach the door to a ceiling track via side screws. **Background:** The bracket screws came loose previously and I re-tightened them myself. After re-tightening, the door slides but doesn't reach its original closed position. Lifting while sliding doesn't help. Brackets look level (top gap is even left to right). Track is clear of obstructions. **My guess** (open to your diagnosis): The door may not have been pushed fully up into the bracket housing before being re-screwed, so the door is hanging slightly lower than designed. But could also be a roller / end-stopper issue. **What I need from you:** - Diagnose the actual cause - Adjust so the door closes properly - Light lubrication of the rollers and track while you're there **When:** Flexible between 8–18 June 2026. Weekdays or weekends OK. **Where:** Carlton VIC 3053 (1-bed apartment, access via key on arrival). **Photos:** I have several clear photos and can send them via Airtasker chat — happy to share before you quote. Looking for a fixed quote (including any light parts or lubricant if needed). If something major comes up on site, please flag before proceeding. Thanks!

Looking for an experienced signage installer or vinyl application specialist to professionally install printed wall graphics in a new FiLLi Café fit-out. The artwork will be supplied already printed. We need someone with experience applying large-format wall decals/vinyl graphics to ensure a clean, bubble-free finish. Scope of Work: * Install printed wall vinyl graphics/murals * Align artwork accurately to design layout * Smooth application with no bubbles, wrinkles or lifting * Trim neatly around edges if required * Protect surrounding finishes during installation * Clean up after completion Wall Details: * Internal café walls * Freshly painted smooth walls * Multiple feature walls * Largest mural approximately 4–6 metres wide * Access available during fit-out stage Requirements: * Previous experience installing wall graphics, decals or signage * Own installation tools (squeegees, knives, ladders etc.) * Please provide photos of previous vinyl/signage installations * Public liability insurance preferred Location: Werribee, VIC Timing: Required within the next 1–2 weeks. When Quoting, Please Include: * Your experience with large-format vinyl installations * Estimated labour cost * Approximate time required * Photos of similar work completed

Screw key safe into wall securely. I can't be sure what's behind the plaster board but sounds like some solid concrete studs at least. It needs to be solid not spaghetti into plaster

General handyman work and waste removal. - install door bell - required to drill into metal - fix hanging curtain - ladder required - remove hard rubbish - cardboard and box of hangers.

I have 2 group lamarzoco. Need the montly maintenance. 1 group is flowing more water than other

Got all the pieces cut, need someone to drill to wall. Have brackets ect

Hi there, I’m looking for a licensed electrician to install 10 hand dryers in a building located in Carlton. All units are within the same building, and parking will be provided. Ideally, we’d prefer plug-in installations where possible (if power points are available in the bathrooms). Some bathrooms have tiled walls, you can try to install on wall if its feasible for users. Power point availability may vary between bathrooms—some may already have them - near where you would like to install, others may not. Didn’t get time to check. Once you take on the job, we’d appreciate you assessing on-site and determining the best installation method as required. Please note - most of the bathrooms, plugs available, areas where plugs not available, you need to make new connections. Looking for someone who can complete the job efficiently. Please reach out if you’re available with a quote - not sure how much it costs. Thank you!

Need a mirror cut to fit in frame

Internal sliding door has become stuck. Door is timber frame (~15cm) and frosted glass in middle part. Only opening halfway. Maybe roller needs changed. Need someone to fix.

I have some floating shelves I want installed We tried to do it ourselves but the wall is solid concrete and will need a hammer drill to get the screws in

Hi, I’m looking for an experienced installer to replace the fabric on an existing folding arm awning at a café. Details: - Location: Carlton - Width: approx. 4.4m - Projection: approx. 2–2.5m - Existing arms and frame are already installed and working - New fabric will be supplied (custom-made) Scope of work: - Remove existing fabric - Install new fabric onto roller - Ensure proper tension and alignment - Test opening/closing mechanism Requirements: - Experience with awning installations (important) - Own tools and equipment - Ability to handle commercial-sized awning Please provide: - Your quote - Relevant experience/photos of similar work Flexible with timing but looking to get this done soon.

Already half installed it, just need someone to come and do a proper job and then then the lock. I have all the bits if needed

Includes the supply and install of one threshold beneath the shower door. Price includes the materials, labour, and Airtasker fees

Undo both flexible waste connections by hand, undo clips from underneath kitchen sink. Remove kitchen sink out of position. Using reciprocating saw or jigsaw section of cupboard out underneath where mixer tap is. Once removed, reinstall kitchen sink and test for any leaks.

Need a couple holes covered to stop rodent access - will be a quick job, holes are hidden so no preference on how they are filled

I need my plaster fixed. See photo

Our events space in Carlton have two tall blinds (see attached photos) that have been malfunctioning and are in need of fixing. You will need a 3M tall ladder to reach which we do not have onsite and will need to be supplied by yourself. One of these was fixed previously, and likely will require a spring, but may require other mechanisms to be installed. We have a busy week of events the week of February 2nd and would hope to have these fixed by then. May require an initial site visit, order of parts, and subsequent installation of parts. Airtasker fee is for inclusive of all contracted works, minus the required parts.

Need to install TV on wall, have wall mount ready needed screws to fit that mount to wall and the wall looks like wooden one and front tiles got placed. Need to install either by removing the tile or something directly.

Camaras went offline and "no link" is coming. And exception showing user or password is uncorrect