Find an experienced handyman in Melbourne

Removable hook for painting was not so removable - please help fix this small patch of paint on the wall ASAP before my lease ends ! Thank you

Install a blind in our office

Replace back fly screen, I have the materials

Hey, I need a sliding door fixed in an apartment. It is probably not aligned properly as it needs a little harded pull to open.

Build plasterboard wall for glass wall with door and small window and shining opening on top of wall..

DISREGARD BUDGET Looking for a handyman proficient in: - Plastering - Painting - Carpentry - General handyman work - Furniture assembly There is a regular amount of work being offered and a consistent variety of jobs. There is enough work for there to be a position offered for a full time job eventually. I am actively hiring and looking to hire as soon as possible Looking for someone happy with hourly rate of $40.00 to $45.00 per hour. Have own vehicle and tools. Looking to hire asap. If you are not proficient in the above tasks please do not enquire. Looking for people who are skilled and capable.

We had electricians in and they bored several holes (approx 15cm diameter) in our wall. We need someone come in and repair and plaster three of these holes. We have the pieces they bored out if useful. This job will require a ladder that can be safely used on a staircase.

Please note the job is in Hawthorn. Supply and install UV stabilised. Plastic coated wire to existing folding wall mounted clothesline. Use appropriate claps and brackets not just a series of knots to maintain tension in wire. Wires must withstand heavy towels without stretching or loosening. After hours is preferred, weekends are also available with prior arrangement.

Rebooking task between Pk and Ehsan

Need an experienced handyman to remove and replace two toilet seats in Brunswick VIC - one upstairs and one downstairs. Seats are supplied: Mondella Signature Ultra Slim Toilet Seat (white) https://www.mondella.com.au/products/toilets/4870434-white-signature-ultra-slim-toilet-seat What you’ll do: Remove existing toilet seats (2) Install and secure the new Mondella seats (2) Align lids/seats properly so they sit straight and operate smoothly Test stability and tighten fixings as needed Clean up and take away old seats and packaging When: Friday - before midday preferred Budget: $60 negotiable You must bring your own tools Phillips and flathead screwdrivers Adjustable spanner or small socket set Pliers (helpful for holding nuts under the pan) Allen keys (just in case the fixings use them) Cordless drill with drill bits (only if old fixings are seized and need drilling out) Notes; New seats and fixings will be onsite Please have experience fitting toilet seats and dealing with tight or awkward fixings

Permanent fixtures needed to hang some quite heavy and large art pieces. Some not so heavy or large. But I want to be able to move the pieces when needed, so all need to be able to hold the heavier ones. 5 x inside pictures 1 x inside key hanger 2 x outside on the deck - would need a drill/screw that could go into brick (see picture) You would provide everything needed i.e. the drill, the right type of screws to make permanent fixtures in the walls etc. A level etc. After work Monday to Friday or early on a weekend day. No rush, but want the job done properly :)

I’m looking for an experienced carpenter/cabinet maker to complete the final installation of two custom solid Tasmanian oak sliding wardrobe doors. This is a top-hung system (not bottom-rolling), so please read carefully. Overview - Qty: 2 sliding doors - Material: Solid Tasmanian oak (raw timber – no finishing required) - Size (each): 2510mm H x 1170mm W x 30mm T - Weight: Heavy solid timber What’s already done (~90% complete) - Top track is fully installed and fixed - Doors are already built to size - Opening/walls/floor are square - Flat timber floor (no slope) - Wardrobe carcass is complete Key clarification (important) This is a top-hung sliding door system with a low-profile floor guide, NOT a bottom roller/bottom track system. - Doors hang entirely from the existing top track - Bottom only needs a small guide to prevent lateral movement - Total clearance available: ~30mm (sufficient for this system) Bottom guide details - Low-profile plastic/nylon floor guide (shown in photos) Requires: - Routing a single narrow vertical groove into the bottom edge of each door - Fixing the guide to the floor - No bottom rollers, no full bottom track, no 50–80mm clearance required Scope of work - Route narrow groove in bottom of both doors - Supply & install suitable low-profile floor guide (or use supplied one if suitable) - Hang both doors on existing top track - Align/adjust so doors are plumb, stable, and slide smoothly - Install stops if required - Clean, professional finish Ideal person - Carpenter or cabinet maker - Experience with top-hung sliding doors - Confident routing grooves in solid timber - High attention to detail Photos provided: top track/hardware, floor guide, installation diagram, and wardrobe setup. Please quote including labour + any small hardware required. This should be a straightforward finishing job for someone experienced with this system.

After a little accident I need to get the plaster board repaired for where this damages occurred. See photos is about 400 high and 300 wide and will need a little paint job.

Fix wooden bookshelves to walls (plaster over brick). L brackets provided. There are 3 shelves. So 6 holes required.

Have 3 holes that were cut out recently plaster. The plaster fits perfectly as I have all the pieces but it needs to be rejoined and smoothed over. (I will paint myself)

Looking for a Handy Person This Weekend I need a very small blind installed on a kitchen window (approx. 1.20 m wide/1.5m height) inside the frame or (1.35m) outside frame and 3–4 safety anchors fitted for blind cords in the same property. You will need to get product from spotlight or bunnings - we will reimburse purchase as well. Should be under $50 according to my research. Beige, oak preferred, but do not mind. Would love for the work to be done this weekend. Please get in touch if you can help. Thank you!

Need wallpaper installed on one wall. Wall size is 6 x 2.5. Wallpaper is striped and will need to be done carefully and neatly. Suburb is Elwood

– Hinge modular TV unit cubes together – Cut neat cable access hole at back of unit – Mount TV unit to wall – Hang large professionally framed artwork (centre approx. 145–150cm from floor) Your own tools, fixings, hinges, jigsaw thingy will be required.

The string bead has come completely out of the track, need someone to fix it.

Small wall repairs & paint touch-up I need help fixing two small damaged areas on a wall and touching up the paint. Please see photos for reference. Task needed ASAP. Thanks!