Adjusting a clock pendulum: A handy DIY guide

Need help with your clock pendulum? Learn from local clock repair experts in our community!

Join Airtasker today!

A quick look at the living room clock before leaving this morning gave that nice boost of confidence that you would make it to work with plenty of time to spare. Over an hour later, sitting in front of your palpably annoyed boss after arriving 30 minutes late has got you thinking: that pendulum clock has been demoted to home decor than a functional clock that keeps accurate time.

To keep this from happening, adjusting a clock pendulum is going to be your top priority.

4 reasons why a pendulum clock is out of sync

rows of pendulum clocks on a wall

Not making it to an appointment on time due to a busted clock is not uncommon. A clock run by a pendulum can be out of sync for a few reasons, such as:

1. Temperature

An increase in temperature causes a thermal expansion, which lengthens the pendulum rod, resulting in changes in the clock’s rate and losing time.

2. Air or atmospheric resistance

Air density that’s influenced by atmospheric pressure and humidity in and around the area where the pendulum swings can have a subtle but cumulative effect.

3. Leveling

Accuracy is heavily dependent on very precise swings, which means it’s vital to keep the clock absolutely level at all times.

4. Gravity and elevation

Pendulum rate goes up with an increase in gravity; therefore, gravity and elevation can influence the accuracy of pendulum clocks. 

If your pendulum has stopped swinging, there must be mechanical friction or some sort of resistance that keeps it from moving. But if you’ve noticed that your pendulum clock is out of sync, you’ll have to adjust it.

Don’t worry! You don’t have to be an expert handyman to perform a simple clock repair. As with everything DIY, adjusting a grandfather clock’s pendulum is relatively easy if you know what you’re doing.

Tips on adjusting a clock pendulum

Fixing complicated machinery such as a grandfather clock can be challenging for a newbie. But with a handy guide, you’ll be able to learn how to adjust a cuckoo clock pendulum (or any clock that runs using a pendulum) that not only complements your home interior but also tells accurate time.

Adjusting the speed

the pendulum of a clock

To adjust a pendulum clock’s speed, the key is knowing the right length. The longer the pendulum, the slower the clock; the shorter it is, the faster it runs. 

  • The key to adjusting a grandfather clock’s pendulum length is the regulating nut that’s found on the bottom of the pendulum just below the bob. Turning it clockwise shortens the pendulum, which speeds up the clock. A counterclockwise turn lengthens it, making it run slower. 

  • To determine the correct speed, check how far off the time is over a 24-hour period. You can use the atomic clock for reference or your mobile phone and move the hour and minute hands to sync with the correct time. 

  • After 24 hours, verify if the clock is in-sync with the correct time. If the clock’s still running faster or slower, make the necessary clock pendulum swing adjustment. Remember, it takes about a complete turn of the nut to move the time a minute up or down. Repeat the pendulum clock adjustment procedure every 24 hours until the clock’s time is synced to your phone. 

  • There may be times when adjusting the nut just doesn’t work, possibly because parts of the old clock might need a little attention and care. The bob could be tight or frozen, or the pendulum has stopped swinging altogether, making adjustments nearly impossible. In such a case, you’d need to do a little maintenance. 

  1. Take out the pendulum and lay it on a flat and clean working surface.

  2. Leave a drop of synthetic clock oil on the threaded adjustment rod where the bob is screwed on.

  3. Make sure the top part of the nut is in the slot and turn it up and down to spread the oil evenly.

  4. Continue to do so until you feel the rotation is smooth. 

Adjusting the beat

man adjusting the time on a grandfather clock

A clock is in beat if the time interval between the ticks and tocks is evenly spaced. You can test this by swinging the pendulum and carefully listening to tick and tock. If they sound uneven, your clock won’t run smoothly. To learn how to adjust a grandfather clock pendulum to run in the right beat, here are a few tips:

  • If mounted on a wall by a single point, try holding the bottom of the clock and moving it left or right until you hear that it’s in beat. You can use a leveling tool for more accuracy. 

  • In the case of grandfather clocks, you’ll have to measure the beat using tape. Mark the center of the pendulum in its natural position and manually swing it on both sides to listen and mark the tape where it ticks and tocks. 

  • To adjust, you’ll have to go up the end of the pendulum rod and find the crutch. Bend the crutch rod until the right beat is achieved.

  • You also might need to check the movement of the pendulum leader where the pendulum is attached to. Remove the pendulum first and carefully move the pendulum leader left to right or vice versa until it almost starts moving by itself. It should have equal movement from the dead center to the right and to the left before re-attaching the pendulum.

Adjusting the chime

vintage pendulum clock on a wall

A part of most grandfather clocks’ accuracy is its chime feature that’s activated every 15 minutes in most cases, playing the entire melody at the top of the hour. When a clock is out of sync, adjusting the chime on a pendulum clock may also be needed.

  • Before making adjustments, stop the pendulum from swinging. Move the minute hand clockwise slowly until the clock chimes, and note the location of the hand. 

  • The minute hand is not in the proper position if it doesn’t chime correctly at the 3, 6, 9, or top-of-the-hour mark. You’ll need to adjust this by loosening the nut holding the minute hand in the middle of the clock. Pro tip: use needle-nose pliers to remove the hand if the nut is tight. 

  • With the hand off, move the center bushing of the minute hand to the correct position using the pliers. 

  • Reinstall the minute hand and tighten. Move the hand clockwise once again until it hits the proper timing chime. You’ve successfully made the necessary adjustment if your clock delivers the correct chimes at the 15, 30, 45, and top-of-the-hour marks. 

It pays to be on time

Clock repair and maintenance seem challenging for folks who are not so much into DIY stuff. But if armed with the right procedure, you’ll be able to make simple adjustments to an old clock and make it functional again.

You might be compelled to give clock adjustment and maintenance a go with the help of our grandfather clock maintenance guide. But if you want to leave it to the professionals, check our clock repair price guide and book a Tasker today!

Find clock repair experts, fast

Find a clock repair expert

Related articles

Related price guides

Let's do this!

It's free and takes only a minute.