Find experienced local tradies in Fitzroy VIC

Need entry wall and roof cavity above it plastered.

Replacing my existing electric hot water system with a new Rinnai 50L unit. The existing system is hardwired, while the replacement comes with an electrical plug. Need a licensed electrician to disconnect the old connection and install a suitable power point using the existing wiring, provided it meets safety requirements. Please include materials, testing and Certificate of Electrical Safety.

Render wall on stair case ready for painting as photographed and small section near wall as photographed

I have an old surface-mounted GPO that needs replacing. Two old rigid PVC conduits enter from above — the left is the incoming supply and the right continues to another working GPO. The downstream GPO needs to remain connected. Looking for supply and installation of a suitable 10A weatherproof surface-mounted GPO, with any conduit adjustment required for the installation. There is also an ceramic fuse that needs checking and replacing with the fuse wire. Please let me know your quote. Thanks.

Needing a plasterer for 3 days for finishing and stopping up. Materials provided.

I have four small areas of damage/previous DIY repair on internal painted walls that I'd like properly finished so they blend into the surrounding wall. The areas are approximately: 1 x 7–9 cm previously patched hole — patch is solid but was finished poorly and is uneven/raised 1 x 4–5 cm previously patched hole — also needs the existing repair smoothed/refinished 2 x approximately 2 cm areas where adhesive pulled off the paint/surface layer of the wall Looking for someone experienced with small plaster/plasterboard repairs and painting to: Correct/sand back the existing DIY patches as required Fill/skim and feather the repaired areas so they are flush with the surrounding wall Repair the two small adhesive-damaged areas Sand smooth Prime where necessary Touch up/paint the repaired areas so they blend with the existing wall and surface texture as closely as possible The larger holes are already closed/filled, so there are currently no large open holes, although I'm happy for the existing patching to be redone if necessary for a better finish. Photos of all four areas attached. Ideally looking for someone who regularly does small plaster repair + painting jobs and can leave the repairs neat and unobtrusive.

Mount three coat racks to a wall. Will need to bring the screws and plugs.

I need plastering done. - 1 small wall. Roughly 1x2m - small patch that backs onto concrete wall - remove the glue off the concrete wall - go around putting putty in dints and scratches and a few sections that have been repaired - sand the cornice in the bathroom.

Description: I need an experienced carpenter or builder etc to replace the damaged awning fascia panel on the front of a shop entrance (see attached photos). The part that requires replacing is circled in RED. Scope of works: 1. Remove and dispose of the existing damaged fascia panel 2. Supply and install a new fascia panel (suitable exterior material) to replace the part that is missing, and the part that is damaged (circled in RED). 3. Prepare and paint the new panel to match the existing building colour/finish 4. Ensure a clean, professional finish that blends with the current façade and is SECURE. Requirements: * Must have experience with exterior building repairs/cladding/fascia work * Must supply all materials and tools * Must colour-match paint as closely as possible *Must provide a tax invoice on completion!

I have 2 small plaster jobs. 1. A hole was made with a door handle about 500mm in length. See photo 2. Fit piece of plaster near garage door. Garage door was replaced and some plaster needed to be cut away. I need the plaster refitted. See photo. No painting required.

See pictures Need these jobs done tomorrow morning Wednesday 5th

Frame out next wardrobes, clean edge, box in 1 section 2400 x 300. Repair 4 cracks / holes

Looking for someone to patch up these holes along with restoring finishes.

I have purchased a retractable awning which I need hung on my balcony. The surface it is getting secured to is concrete. Someone has already started the job, so it’s measured up and all four holes have begun to be drilled, but it just requires someone finish it. The remaining work is to complete the holes (all have been started - but we required a better drill bit), and then hang the awning. You will need a 16mm drill bit (masonry) - I’ve taken a photo of the tools required. The awning is 50kgs, so requires two people to complete the job. Awning link: https://luxiliving.com.au/products/etna-half-cassette-retractable-awning

Hole in the wall. About 10 by 15 cm

We have some chips in wall, toilet broken, windows need to be able to open.

Upstairs living room: only one power point is working, the others are not. Not sure what caused the issue. Any licensed electrician who can fix it, please get in touch

Power point needs to be fixed to the wall. It is for a fridge.

I have an existing power point in a cupboard that needs moving. We are removing the cupboards, so need the power point to go against the wall instead. The wiring won’t need to be moved (the location is fine, just needs to be moved from off the cupboard and to be against the wall instead). It is a power point for a fridge.

3 folding arm awnings need canvas replaced