Find experienced local tradies in South Yarra

I need some plastering repair done on a plasterboard wall. There are three holes that need to be patched and sanded. I’d also like help installing a shelf. Thank you.

I would like two electric power points to be re-positioned and one power point changed. Please refer to photos.

Stop, sand and paint a 3.7m x 2.4m wall, on both sides. Paint provided, contractor to provide plaster. Neat and tidy work required, with contractor to clean as they go.

Wall and cavities from old light fittings need plastering. Pictures attached

Renovating a dining area that requires a plasterboard wall to be installed. Height 2560 Width 920

Clear the Holes: Use a utility knife to remove any loose plaster or paint flakes around the damaged areas. Fill the Holes: Use a heavy-duty filler like wood filler or a rapid-setting joint compound (e.g., Gyprock Rapid Patch). These harden more robustly than standard putty and can better hold a screw once dry. Smooth and Finish: Once the filler is completely dry, sand the area lightly with 120-grit sandpaper until flush with the ceiling. Apply a primer and paint to match the ceiling. 2. Secure Reinstallation, use hollow wall anchors or screw-in anchors.

The plaster around the light fitting is damaged. The electrician will remove the light, you will fix the plaster and apply some paint to match, and the electrician will come back to fit the light back in.

Need a bulkhead cornice added to match existing. 3.5m long wardrobe and 0.6m deep. Total linear length of 4.7m. You will need to buy cornice and find closest match to existing.

Replace 3 x existing power points.

The gyprock wall has multiple old anchor screws and holes in the wall. The first wall needs to be patched, plastered and painted. Second wall has minor chips in the plaster needs to be patched and painted. I’ve included photos. Task preferably to be completed on a Monday or Thursday between 8:30am and 4pm

I need an electrician to fix the lighting in an awning that has been off for a while, I’m assuming only bulbs needs to be changed but not sure, it requires a ladder and there’s another small board with led lighting that isn’t working as well!

Looking for someone to render - - Fix gaps either side of the front door - Render over vent No need to paint render

Looking for a electrician to hang a tv and move a few power points

Looking for someone experienced to cut an aluminium roller awning Need to have own tools Need today Other options Take the awning away and dispose of it (no cutting required)

I need a large framed artwork professionally hung on a plasterboard wall. Approx size: 1800–2000mm wide x 800–1000mm high Weight: moderate/heavy Wall type: plasterboard Artwork needs to be level, centred and securely fixed. Please bring appropriate fixings for plasterboard and tools. Two-point mounting preferred (not a single hook). Experience hanging large/heavy artwork preferred. Location: South Yarra

I've recently bought a Kings 270 awning to fit to my car, but might have bit of a bit more than I can chew. My car has two rhino rack vortex cross bars but going by research I think I may need to get another for this to work. If anyone has done this job before and can give me a helping hand it would be very much appreciated.

Need 6-7 small torn drywall patches repaired

I have a broken verandah tile that needs replacing.

Need someone to help with plastering in the areas as in the photos

Installation of 15sqm of plasterboard into an internal smooth rendered brick wall. All materials required will be on site