Find professional local plasterers in South Yarra

Small plaster hole needs patching, sanding and painting. Wall is white/off-white. Looking for a seamless finish.

0.5 x 0.3 m hole in plaster. Have the paint available! Only !experienced Australian! plasterers thanks.

Wall and cavities from old light fittings need plastering. Pictures attached

Renovating a dining area that requires a plasterboard wall to be installed. Height 2560 Width 920

Need plaster up to the ceiling Make it ready for tiling Some patches o. Ceiling as well

Clear the Holes: Use a utility knife to remove any loose plaster or paint flakes around the damaged areas. Fill the Holes: Use a heavy-duty filler like wood filler or a rapid-setting joint compound (e.g., Gyprock Rapid Patch). These harden more robustly than standard putty and can better hold a screw once dry. Smooth and Finish: Once the filler is completely dry, sand the area lightly with 120-grit sandpaper until flush with the ceiling. Apply a primer and paint to match the ceiling. 2. Secure Reinstallation, use hollow wall anchors or screw-in anchors.

The plaster around the light fitting is damaged. The electrician will remove the light, you will fix the plaster and apply some paint to match, and the electrician will come back to fit the light back in.

Need a bulkhead cornice added to match existing. 3.5m long wardrobe and 0.6m deep. Total linear length of 4.7m. You will need to buy cornice and find closest match to existing.

The gyprock wall has multiple old anchor screws and holes in the wall. The first wall needs to be patched, plastered and painted. Second wall has minor chips in the plaster needs to be patched and painted. I’ve included photos. Task preferably to be completed on a Monday or Thursday between 8:30am and 4pm

Sand back and paint square patch of ceiling

Hey airtaskers We’ve recently removed a wall in our apartment and need some patching done on the roof Approx 5m x 100mm and 2 small holes ( I have the cutouts to put back in. Looking to do asap Onsite parking

A fitted bed frame has been removed, leaving glue and plaster damage on the ceiling and wall. We are selling the house and settlement is Thursday. There are two power points that need to fit back into the wall. The glue needs to be scraped or sanded away from the plaster. Paint supplied.

Need to fix a damaged wall

Hang and secure valuable 4 x vintage art posters on plaster board wall and one heavy mirror

I need a large framed artwork professionally hung on a plasterboard wall. Approx size: 1800–2000mm wide x 800–1000mm high Weight: moderate/heavy Wall type: plasterboard Artwork needs to be level, centred and securely fixed. Please bring appropriate fixings for plasterboard and tools. Two-point mounting preferred (not a single hook). Experience hanging large/heavy artwork preferred. Location: South Yarra

I’m moving out and need a few repairs done for an end of lease to hopefully regain my full bond. Jobs needed: A mural was removed and it has pulled off some plaster. The wall underneath appears to be white wallpaper. I need the wall repaired and repainted or replastered to a neat white finish. One window pane needs replacement as is cracked. One wall has some plaster spots and needs paint matched to the existing wall or the wall repainted. There is a mirror with a crack — fixing this would be a bonus but not essential. I’m looking for someone experienced with plastering and painting. If any of these repairs are very expensive, I may choose not to proceed with all items, Thanks

I have some water damage on the bedroom roof. The patch is. 60cm L x 45cm W. The source of the damage has been resolved. I require the damaged section to be cut out and replaced with a patch ready for painting down the track

Needing to get a hole in the wall plastered. Hole is about the size of a bottle. Looking to get this completed as soon as possible.

Need 6-7 small torn drywall patches repaired

I need someone to make a very clean cut around an already existing cut of plaster board. It needs to be a very clean square cut, I have outlined in blue what the cut will need to be. It's a small area, to give you an idea of scale those are washing machine hose / water pumps. I don't need it 'patched up' or replastered or anything like this, just to make it clean and tidy.