Find a professional local handyman in London

Urgent (safety and hygiene) Hob doesn't ignite (gas engineer) Living room: dead socket behind the TV, and the loose socket surround by the window (electrician) Treat the mould and damp staining low on the bedroom wall behind the bed Check the airing cupboard for leaks (rust streaks below the valves) Make good the hole above the boiler flue Test the CO alarm and confirm the gas safety certificate is in date Electrician Repair the dead socket behind the TV Master bedroom: fix the light that doesn't work (try a new bulb first) 1st bedroom: replace the dim light with brighter bulbs, same colour temperature throughout Replace the blown E14 candle bulb on the landing Clean or replace the grubby switch plates and sockets Handyman Kitchen: tighten the wobbly cupboard door Kitchen: re-edge or replace the cabinet door with peeling edging Kitchen: reattach the fridge door shelf and the freezer door handle Kitchen: refit the plinth under the sink and replace the scotia Kitchen: repair the damaged floor Re-silicone behind the kitchen sink, around the bath, and around the shower mixer plate Bathroom: fix the broken sink cabinet and refit the loose fitting by the bath taps WC: refix the broken boxing panels behind the toilet WC: repair the split door frame around the latch 2nd bedroom: fit a door stop Airing cupboard: clear the loose boards and battens, refit the shelves, re-lag the pipes Living room: tidy the loose cables with clips or trunking Fit the new blinds (1st bedroom, WC, and the kitchen if replaced) Decorator Wash and repaint the kitchen walls, all bedroom walls, the hallway and the stairs Bedrooms: fill and sand the patches and scrub off the black scuffs before painting Living room: repair the peeling wall and make good around the socket and aerial plate Sand and repaint the banisters and handrail Repaint the flaking window frames and sills (bathroom and bedroom) Repair the cosmetic damage next to the fridge

Fix new bath panel onto bath Bathroom ceiling is peeling. Remove peeling paint and apply appropriate paint. Kitchen sink is leaking underneath the basin. Find the cause of the leak and fix it. Kitchen sink tap needs to be changed. The sealant around the basin needs to be reapplied.

Need full servicing, cleaning etc with service certificate for an apartment block of 10 apartments

The dishwasher it’s not washing properly it may need maintenance

I am looking for a full time maintenance handyman. Experienced with all sorts of jobs. Tidy, communicative, responding. With a working car/van. Fixed Monthly Pay. Plus extra bonuses depending on jobs. Also compensation for fuel. London Area.

Flush button needs to be replaced. I have done in the past. The old code was Grohe dual flush push button assembly - chrome 42268 000. I think the new code is 42204PI0. Tenants have also reported the kitchen sink leaking but it should be minimum effort as it only requires tighting. the the metal trim between the carpet and the tiled floor has lifted and is partially detached. Size is 1.46 cm. Probably needs to be replaced. Also the two bulbs of the kitchen extractor/range hood need to be replaced. Materials need to be provided

We are looking for a reliable and experienced handyman to carry out a few small maintenance jobs at our clinic on Harley Street, London W1G. The jobs include: Hanging two pictures on the walls, ensuring they are secure and level. Removing an existing window blind and installing a new one (replacement blind already supplied). Removing a stuck kettle plug from an electrical socket. The plug appears to be physically stuck. This will need to be assessed and safely removed by someone appropriately qualified to undertake electrical work. Ideally, we would like all jobs completed during one visit. Please bring your own tools and any necessary fixings. When responding, please confirm your availability, experience and whether you are qualified to undertake the electrical work. Thank you!

1. Put 4x floating shelves up 2. Build a tallboy unit 3. Put a tv and bracket on wall 4. Remove and apply sealant around bath, bath panel & sink 5. Remove flaking & paint ledge around garage door image attached

ECM espresso machine, home service and maintenance. The machine is working well and some rubber parts have been replaced regularly. After years of operation, I would like a professional service with checking the water boiler and steam lines and the electrical connections.

• carpet change on stairs and landing • ⁠ laminate wood floor change on landing and 1 bedroom • ⁠new floor transition strips everywhere required • ⁠1 bedroom change carpets or put wood laminate whichever one is cheaper • ⁠new beading in 3 rooms • ⁠this should all include the underlay • ⁠ full repaint of white Need reliable builder in east London, for the job above.

1.8 x 1.2m Whiteboard installed in a gym studio: Installing on a plywood wall so correct Rawle Plugs will be required. Fixing a broken Toilet Seat: The toilet seat is intact. The Screws have just come loose. Realigning the studio fans that are out of place: Photos of nuts and bolts on the fans attached. We have a stepladder that can be used.

Emergency pre-winter repair of rotten timber bargeboard (Apex): I need a quick timber repair completed before the winter rains arrive. A section of the wooden bargeboard and underlying fascia near the chimney stack at the roof apex has rotted and needs cutting out and replacing with treated timber, then sealed to prevent water ingress.The house is being fully painted next year, so this just needs to be a sturdy, watertight, weatherproofed fix for the winter. The rotten section is high up at the gable peak. I am looking for someone who can complete this using alternative access rather than setting up full structural scaffolding. Seeking an immediate turnaround. My painter company will do the main work next year and he said I might find someone to do a temp fix in the meantime. I don't have any of the materials or equipment need for the job. I CANNOT GET THIS WEBSITE TO TAKE MY CARD DETAILS!! I Have spent about 30mins trying to upload have calls from bank and tried a diff card to no avail I am deleting task and will try another platform sorry to have wasted time on anyone quoting.

Fix creaking / squeaky bed Fix 2x bedroom blind drawstring Put up 3x small floating bookshelves

Green Street Cleaning & Property Maintenance is looking for a reliable and experienced person to complete a few maintenance jobs at a communal residential property. Work required: Paint a communal/front entrance door Touch up a section of wall Change/replace a communal light or light fitting, depending on what is required The property is currently being maintained by Green Street on behalf of the landlord. Looking for someone who: Has experience with painting and general property maintenance Works neatly and professionally Can provide their own basic tools/materials Is reliable and punctual For the electrical work, has the appropriate qualifications/competence and insurance for the work required Please include your availability, experience and your price/quote when applying. Photos of the areas and further details can be provided before the job is agreed.

Multi-Trader Required – Ongoing Property Maintenance Experienced all-round multi-trader required for various repair and maintenance jobs across residential properties. Work includes painting, decorating, plumbing, carpentry, flooring, tiling, doors, locks, kitchens, bathrooms and general repairs/making good. Must be reliable, professional, able to work independently, have your own tools, own vehicle and a full driving licence. Ongoing work available for the right person. Please message with your experience, availability, location, vehicle details and day/hourly rate.

Service of the hot water storage heater and descale the cylinder. Upgrade the main control (the current one is very old) and wire in the additional immersion (the booster part is current unwired and need to be wire).

I’m looking for an experienced plumber/heating engineer to carry out full maintenance and cleaning of all radiators in my flat while the building’s communal heating system is currently drained. The flat’s heating circuit should be capable of being isolated from the communal system – this has been done by previous engineers. I would therefore like the engineer to identify and close the appropriate isolation valves before the communal system is refilled. For all radiators, I would like: • Individual flushing/cleaning to remove sludge, magnetite and debris, removing and flushing radiators where appropriate • General inspection for corrosion or leaks • TRVs and lockshield valves checked for correct operation/seizing • Valves, tails, connections and fittings checked and replaced where necessary • Bleed valves/vents checked • Any other sensible preventative maintenance while the system is drained • The flat/radiator circuit appropriately isolated and left safe before the communal system is refilled • Once appropriate, the radiators refilled, vented and checked for leaks and correct operation This is a communal heating system, so I am not requesting a powerflush or chemical treatment of the whole building system. The important requirement is that the necessary isolation and any work requiring the communal system to be empty must be completed before Monday, when the building system is due to be refilled. Please let me know your experience with communal heating systems/radiator maintenance, the flushing method you would use, and your availability before Monday.

Routine Maintenance: - Carry out regular property inspections and resolve issues. - Perform minor plumbing tasks (fixing leaks, unclogging drains). - Replace light bulbs, fuses, and small electrical components. - Ensure appliances function properly and address faults. - Handle touch-up painting, redecoration, and small repairs to walls, ceilings, and doors. - Respond to tenant maintenance requests. - Ensure compliance with safety standards.

Instal shower caddies Fix toilet seat Fix hot water dispenser (clogged with limescale) Leaking pipe Shower handle Stabilize coat rack

Quite a simple job, as I was cleaning the kitchen sink, the plughole dosen't seem to attach to the drain anymore, I think it's just because the filaments got used in time. And as we're doing this I was thinking to might as well do a cleaning of the sink unit. There is a hardware store 2 mins from my building in case we need replacements.