Find a professional mdf contractor in London

Install 4 Spacepro Sliding doors on wardrobe, will need to install MDF for tracks, width approx 293cm and height approx 235 cm

I have one MDF board stuck on the ground floor of my building in E3 because it won’t fit in the lift or stairwell. I need someone to come today with a track saw/circular saw and dust extraction, cut it in half that will fit, and help me take them upstairs. THERE IS NO SOCKET IN THE BUILDING TO PLUG IN

Hi, I have a 200cm TV unit that I need professionally shortened to approximately 170cm by removing 15cm from each side. It’s laminated chipboard/MDF. Would you be able to cut and modify this for me neatly like factory finish? https://creativefurniture.uk/shop/tide-crest-gold-tv-unit-200cm/

I’ve got 2 x 2400 × 600 mm acoustic slat wall panel — MDF/wood slats on felt backing. I just need two straight cross-cuts so I end up with three equal panels of approximately 800 × 600 mm, per panel or 6 in total

I would like to install MDF boards on my laundry walls- need someone who is able to cut excess off the boards and put them in the correct way on the walls

I have a cabinet that I want to make look built in by covering th gaps with MDF - I have a large MDF board but unsure how to cut it and don’t have a circular saw

Approx 4 pieces of MDF to cut with circular saw (not provided) and mounting 3 shelves

I need approx 5cm cut off a 30cm long piece of painted MDF panel. Ideally as neatly as possible with a circular saw (I don’t own one of these)

I need someone to help me setup this installation - they are 8.5 panels = 50cmx 175cm x 4mm MDf with a platform of 4mm mdf. They need to come together in shape of a decagon attached onto the platform. I have spoken to a carpenter who said a frame is necessary to hold it together and that it takes about half a day to build and install together . Additionally the frame should also include the frame for a dome which will be stretched with fabric -please see images below for reference

I would like to make floating TV console.

New stovetop slightly too large for countertop, need worktop to be cut/made around 1/2 inch bigger to fit the stovetop

Install mdf wall panels to bottom half of wall in 1 room appx 4m x 4m. Panels should be glued to wall and levelled and use wood filler to fill gaps / blend in with skirting and dado, caulk. Total of 44 horizontal panels and vertical pieces between each panel. Instructions: https://drive.google.com/file/u/0/d/1IloVmcCkTnxABik82lUZfpotQnsTgqoX/view?utm_source=brevo&utm_campaign=Custom+Height+Shaker+Wall+Panelling+Kit+Instructions&utm_medium=email&pli=1

trim and attach mdf/wooden mouldings to wall with screws / adhesive like shown in photo - Due date: Flexible