Find professional cornice repairs in London

Restore two ~20cm are was of broken cornice. It was previously removed for build-in cabinet and now needs to be restored - see on the right and on the left of attached picture

Cornice was removed when we had building work done, needs replicating for the small corner as shown in the photo

Looking for someone experienced with installing polystyrene coving/cornice to fit Orac CX106 in our entrance hallway. Hallway is approx. 3.1m x 1.1m so will be 8.4m total, with 4 internal corners. We already have: • 6 x 2m lengths of Orac CX106 • Orac DecoFix Pro adhesive • Orac DecoFix Ultra joint adhesive Need it cut, fitted, joints/corners finished neatly with caulk and left ready for painting. No old coving to remove and no painting required. You will need a proper mitre box etc. Job is in Battersea SW11

Put up cornicing on the wall, the wall is approx 5 m wide and 2.5 length

Plasterboard cornice needs putting up. Square room approx 4x4m. We have acrylic grab adhesive. Edges need to be mitred for correct angle at corners.

I need a small piece of cornicing removed cleanly as I will be installing a built in wardrobe. See image attached. There is parking on the property.

around 4m of kitchen cornice (top of kitchen) to be installed. Left photo is my kitchen, right photo is example of what the cornice looks like. Need some with carpentry skills

My new kitchen is all fitted. All I have left to do is put the cornice on top of the cupboards and I have a small piece of skirting left to do under the dishwasher. I have a big mitre pull down saw which should be all you need to do the job.

We have x6 rooms where we need the cornice cut 30cm on each side of room to allow for curtain track to sit in

Just a few boxes, bits of carpet etc PLUS help to fit Cornice bars to ceiling ... no more than 3 hours

Install “dentil” cornice especially (LED uplighting provision). Many mitres. Must be a specialist to ensure perfect mitres / joins.

Require plaster cornice installed in bathroom and in rare extention. 11 mtrs in bathroom and 7 mtrs in rare extension.

Finish installing ceiling cornicing. This job requires someone experienced due to the style of cornicing.

Cornice refurb/sanding A lot has been infilled and needs industrial sanders/ sculpting and cleaning.

Will provide you details for 8 rooms, entrance hallway, first floor hallway

Create a timber infill and fit above the cupboards to hide ducting. Finish with a matching cornice (existing is soft/polystrene material). Make good, seal, paint nicely. Supply all materials except paint. Images show current gap and a mock up of what I need.

I recently had new cornices installed in a room and the person who did it, didn't do a good job as they made the corners round and this was not what I was looking for, I want the corners to be a sharp mitre. There is also one section that is not complete, also shown in photos.

Cut and stick cornicing to the walls in a small living room.

I have some coving that needs to be put up in my living room. Must be able to cut the patterned corners precisely Thanks

Bedroom floor to coving including door and wardrobe doors and window frames Hallway floor to cornice to include one side of door Living room floor to ceiling including media wall 1 side of door and window frames Hallway