Find professional local plasterers near you

Walls on my Landing plastering

Some walls have damaged plaster due to removal of skirting boards, kitchen has had French doors installed and needs plaster repair. Bathroom wall needs attention.4 radiators need chasing filled.

We need someone who is adaptable to fit plasterboards skirting board general DIY we are completing a extension.

We need our lounge skimming. Rooms is around 22m squared. This would need to include all prepping (PVA + skein tape etc). And then all 4 walls and ceiling. All materials must be included. Must be pink/multi finish plaster not easy fill. Must include covering floor. Otherwise room is empty and prepared. Looking for start date ASAP. 2 plasterers recommended.

Need a very small room re-plastered. Size and floorplan of room attached.

Two cielings have this wierd material, don't want to sand as scared of dangerous chemicals can be released, looking to plaster over. Living room has four walls, 1 other wall on top landing. So in total 5 walls, two cielings to be skimmed over with plaster. Looking for a thin layer of plaster (skimming) to hide bumps

i need my bedroom plastered. i tried to do one wall and. it failed so i need it done please. it’s 4 walls and the ceiling

I have a number of rooms that need plastering

We’ve had cavity wall insulation installed and the holes have been filled in but are obvious. We’d like decorating/plastering on our outside walls if possible. Attached one photo of our back wall. We are happy to discuss price so the budget has just been put in so we can finalise the enquiry

Replaster small bedroom. It’s mostly top half of one side of the room that needs replastering where a mezzanine has been removed. Please ask if you want any further information. I need work done asap. Flexible on days and times. No idea on price, so I just put in an amount to get the ad up. Room measurements - 256cm x 333cm

Wall needs filling and plastering, sink also needs a slight fill to stop a leak

The broken piece of wall needs to be re-attached and plastered. It is a small piece about 40cm in diameter.

Our Garden Shed’s ceiling - one plater board has fallen down and another one is at the verge of falling down! I have fixed the leakage now I want someone to come over and fix the plaster board properly!

We would like to mount a 6'x4' whiteboard to this wall that has this stuff on the wall as pictured. To mount the whiteboard we require the TV mounting plate to be removed. Also the power sockets will need to be removed as they will prevent the whiteboard from sitting flush with the wall. The wall is an internal plasterboard wall in an office setting.

Got rid of some of the pain on the panel but realised it was damaged and had way to many layer to take off. Tried to put some filler but it’s super uneven. Want to just make it even and look ok.

My bathroom ceiling is cracked. It needs to be re plastered and painted.

A wall has been immaculately plastered and the section of the wall needs a little sanding and painting to blend in with the rest of the hall way wall.

Plastering a ceiling and fill in cracks

Need to repair the bathroom ceiling and Painting

Main Job Brief - Remove existing plywood boards that have been affixed and plastered over a window recess to cover a blind - Drill new holes to fit blinds one cm back - Install GRP/fibreglass cover (supplied by me) instead - drilling and screwing/bolting into window recess - Plaster over the covers to uniform finish and level with wall - Paint whole wall of bay windows - Paint a second wall Problem: - I previously installed plywood boards inside the front of window recesses which contained roller blinds, the blinds were affixed with a number of steel L brackets. (Photo 1, 2) - The longest section (around 260cm) has warped, cracking the plaster. (Photo 3, 4) - The board now pushes against the blind Solution: - Install a fibreglass/GRP profile instead of the plywood. The profile will be L-shaped so can be screwed into the top of the window recess without using brackets - It must be securely fastened across multiple points, and plastered over with a good plaster/wood filler to prevent cracking - The ends may be fastened with L-shaped brackets to the side wall if required - The profile should be sanded/prepared and painted to a uniform finish along with the rest of the wall - The blind should also be moved back around 1cm, to further minimise the chance it brushes against the GRP cover - There is only 9.5cm of space from the window to the end of the recess so space is tight Second Task - I'd like to run thin cables through the 2 wall corner sections connecting between the bay windows to power/charge the motorised blinds - This should be done without cracking the 2 shorter plywood blind covers that are in fairly good shape - It could be done by carefully running a channel and covering over or perhaps by drilling from both sides of each corner through the brick Third Task A second wall should be repainted in the same colour as the other wall. It's already well painted except for a few very small patches that have been incorrectly touched up with paint