Find professional window and door services in London

Radiator leak. Window plaster and paint, wall cracks one , ventilator fix

Door hing macanisim has come out and needs repairing.

Hello there, I have to fix some tiles that are loose when walking on. Is affecting just few tiles where the grout in between is kind of missing and I believe the water splash from the bathroom is what made it worse. Also there is the under sink door hinge needs fixing better, I tried screwing it back in myself but the wood is wet and not holding on anymore. Ideally you are close to the turnpike lane area N8 in North London as I will use you for any other future handyman jobs, no matter how big or small.

I need the oven door fixed

wardrobe sliding doors have come off their railing/runner making them extremely difficult to move or not move at all. These are rather large sliding wardrobe doors with glass mirrors

Hi all , Just wanted to someone help me out with fitting outdoor storage from B&Q. Many Thanks

During maintenance work a scaffolding plank fell onto the base of my patio door frame leaving a hole in the bottom of the frame supporting the track on which the door slides. The door continues to open and close. But I need the tracking board repaired or replaced

We currently have a floor to ceiling sliding door wardrobe which has two opaque glass panels. I would love to replace these with mirrors instead. Specs are tough and would need proper measurement but approx 2x panels Both are 59cm w x 2.3m h

Microwave door is loose needs tightening, cupboard door has fallen off, needs to be screwed back on

The wooden section under my front door has broken and sunk and there is now a significant gap under the front door. I need the existing wooden section ripped out and a new joist and sill fitted. This would also require taking up some floor panels

-fix ikea sliding doors. One does not go both ways anymore and keeps moving down into a gap and makes a screeching noise -paint a door, I have paint in my property

Internal door needs cutting down to size and installing and hanging, with hinges and handles etc. provided. https://www.wickes.co.uk/Wickes-Flush-Primed-Paint-Grade-FD30-Internal-Fire-Resistant-Door---1981-x-762mm/p/239056

I'm not exactly sure what the issue is I think the door handle might need replacing but whenever I shut the door it springs back open (its okay if you lock it, it stays shut, but if not it just bounces back) Happy to send a video!

The door of the wardrobe was always a bit wobbly but it completely came off. We can’t fix it with our tools, pictures attached

Please pop in and take a look at the window in the bedroom. I’ve had my handyman look at it and he couldn’t fix it. Once you take a look please contact me so we can discuss quote for further action.

Install the TV mount Install the cupboard doors, as we were unable to do it ourselves

Main Job Brief - Remove existing plywood boards that have been affixed and plastered over a window recess to cover a blind - Drill new holes to fit blinds one cm back - Install GRP/fibreglass cover (supplied by me) instead - drilling and screwing/bolting into window recess - Plaster over the covers to uniform finish and level with wall - Paint whole wall of bay windows - Paint a second wall Problem: - I previously installed plywood boards inside the front of window recesses which contained roller blinds, the blinds were affixed with a number of steel L brackets. (Photo 1, 2) - The longest section (around 260cm) has warped, cracking the plaster. (Photo 3, 4) - The board now pushes against the blind Solution: - Install a fibreglass/GRP profile instead of the plywood. The profile will be L-shaped so can be screwed into the top of the window recess without using brackets - It must be securely fastened across multiple points, and plastered over with a good plaster/wood filler to prevent cracking - The ends may be fastened with L-shaped brackets to the side wall if required - The profile should be sanded/prepared and painted to a uniform finish along with the rest of the wall - The blind should also be moved back around 1cm, to further minimise the chance it brushes against the GRP cover - There is only 9.5cm of space from the window to the end of the recess so space is tight Second Task - I'd like to run thin cables through the 2 wall corner sections connecting between the bay windows to power/charge the motorised blinds - This should be done without cracking the 2 shorter plywood blind covers that are in fairly good shape - It could be done by carefully running a channel and covering over or perhaps by drilling from both sides of each corner through the brick Third Task A second wall should be repainted in the same colour as the other wall. It's already well painted except for a few very small patches that have been incorrectly touched up with paint

My door closer isnt working. It isnt necessarily broken as I have had this problem before but it needs adjustments done to get it to close automatically again

Hang 10 Picture Frames: Frames vary in size. Proper alignment and spacing are important. Wall type: Brick Please bring your own tools and hardware (nails, hooks, etc.), and wall scanner. Replace 3 Door Knobs: Current door knobs need to be removed and new ones installed. Doors are lightweight and the screws have come loose over time. I have the new door knobs ready to be installed. Please bring appropriate tools. Hang a Curtain Rod: Curtain rod and brackets need to be securely mounted. Please reach out if you have any questions or need more details. Looking forward to working with you!

My dog has nibbled on my door frame, please see pics. Just need this plastered and coloured.