Find professional window and door services in Central London

I have a 2020 BMW i3, and the outer front passenger door panel has come slightly loose. I believe some of the clips might be broken. The panel itself isn’t damaged—just needs to be removed and refitted with new clips.

I have 3 tasks : 1.) bathroom towel radiator has come off the wall needs to be screwed back in - it’s a drywall (2.) the integrated dishwasher’s wood panel has fallen off and needs to be screwed back in. (3.) one kitchen draw’s panel has come off and needs to be screwed or glued back in. I have the gorilla wood glue and the pump Task Address: Montaigne Cl, London, England SW1P 4BF

Three garage doors in W2 2SB, have gaps at the bottom, need to add a plank at bottom of each door to fully close, the gap to avoid dust and rodents and foxes from entering. There are examples of doors that have already been fixed in this way. In this way. In thePhotos attched, there are three doors to be done and the sizes are as follows.: Here are the measurements for the 3 garages (width of the door and the gap between the closed door and floor): # 9 door: 221 cm wide, 8 cm gap # 11 door: 221.5 cm wide, 9 cm gap # 19 door: 221.5 cm, 10 cm gap People have filled the gap in 3 ways that I could see: 1. fitted wood planks on the inside or outside of the door, 2. ⁠fitted wood plank seemingly on the ground, along the door. 3. ⁠fitted rubber like material plank on the inside (or outside) of the door 1 is the most common. Would like to get this done as soon as possible. Sunday the 8th June, tomorrow would be a great time to get this done.

I have 2 x Ring doorbells. I need one fitted and set up to be able to use easily and painlessly. So clever tech person needed. Northcote Road area SW11.

The room has an in-built wardrobe - the door is a sliding glass door. The repair would involve replacing the broken glass (see picture) and putting the sliding doors back on the sliding track (see picture).

I’m looking for a reliable and experienced tradesman to help finish off some upstairs doors in my home. Scope of work includes: - Fitting door handles and locks (I already have all the hardware in stock) - Some doors already have architraves finished, others need architraves fitted and made good - Ensuring a tidy, professional finish on all work Sorry to be this level of detail but i've been burnt a few times with tradeys so i need to make sure that you have: - Proven experience fitting internal doors, handles, locks, and working with architraves - Must bring own tools - Must be able to work cleanly and with care - Ideally available in the few days Please reply with your experience, availability, and a rough idea of how long the job might take based on similar past work. Photos of the space can be provided if helpful. Location: SW18 Wandsworth/Earlsfield

Need someone to isolate door bell from mains we previously thought was disconnected.

Wooden doors, metal door handles. I would like them replaced with new handles with a upmarket feel

I had a door taken off the frame a couple years ago to open up a kitchen / living room area but now need to put the door back on. Shouldn't take even half an hour - was very quick to detach but I have no idea how to do it! In need of help

Replace bedroom doors incl cut to size

The bottom of the door is damaged by damp and I need someone to cut the bottom shorter. It has expanded by the water damage and it’s scraping against the floor making it difficult to open the door.

I have a window that won’t close, the hinge is bent

Bathroom door is hard to open. Some part is stuck We dont know whats problem But we guess circle part in photo has too tight gap.

I need a new shower bracket (supplied and fitted), a door handle needs to be screwed onto the door and a mirror fitted to a wall.

I'm posting a small job here. One of the windows is not closing properly. I'm fairly sure that a small part of the opening mechanism—possibly a screw—has come loose and fallen off. As a result, the window now hangs slightly downward when opened and cannot be closed properly. I've attached a picture of the opposite window, which is a mirror image of the damaged one. The missing part has come off the upper section of the closing mechanism. It is possible that the upper hinge needs to be replaced.

I bought a sliding bathroom door, but the metal bar that supports the sliding system is too wide. It needs to be cut and adjusted, and the door fitted afterward. The system is from COBURN sliding system and we have all the parts and specs necessary for assembly. The proper tools to cut the metal bar, need to be provided (we do not have the necessary tools).

I live on an estate in Kilburn Park and I just bought a camera doorbell but it needs 4 screws drilled into the door, unfortunately I have no drill so this is the task. Simple.

I need someone to remove an old door latch and fix a new one that I have already bought

Looking to have cord repaired which has snapped on sash window, only on one side

Window part of frame fix . It doesnt effect window function . It seems just wood part is fallen