Find a professional local handyman in Hackney

The ceiling fan works, and is running now - but is making noise. It started a little bit like crickets, now every so often there is a slight rattle. I think it's the motor - I need someone more qualified to check the motor/electrics and correct the fault, which may be as simple as oiling the motor...

Remove existing ceiling fan and fit new one

General handyman required, ideally electrician, to source & replace bathroom extractor fan, source & fix/replace bathroom ceiling lights, fix/reattach window handles, re-attach button on toilet top (minor issue).

1. Put up shelves in boiler cupboard (two shelves, we have brackets but not screws/plasterboard reinforcement) 2. Install new showerhead holder 3. Fix wardrobe door (please advise on/provide screws) 3. Tighten shelves in bathrooms 4. Re-paint rusted balcony table and chairs (please advise on paint) 5. Put up 5 picture frames

I need someone to install roughly 15 metres of chicken wire across a garden fence. The wire would need to be about 90cm in height. You’d need to kindly supply materials and any tools necessary. Ideally it would be nice to get some advice as we are trying to keep a neighbouring cat outside of the garden so not 100% sure if chicken wire is the best option.

I need 2 lights replaced in the hall. BE WARE: 2 people have tried but had to cancel, as they couldn't complete the job when here, so please do NOT accept job before reading and understanding pics - As you can see in the pics. The same lights in other parts of the flat have been placed onto some sort of brushed metal box. (Silver box shown in pics). Can you tell me what it is and source it, (I'm happy to order and pick up) as these 2 new ones need to look the same. The hole in the top of the light is not big enough for the cables to be fed through it. The light needs to be mounted onto the same sort of silver metal box to match the others and wired through that, You need to know how to attach the silver box to the wall and this specific light to the metal box. So check dimensions and hole placements. I've shown specific light from screwfix below. As stated ,2 handy men have failed and had to cancel the job, so please don't accept unless you 1. know where I can get the 2 silver boxes, 2. can work out how to mount this light to that box, 3. work out how to have space for the wires inside. The black box in the pics, on the wall has no front plate and needs to be removed, as it's part of the old light If the job can't be completed we will have to cancel. Only accept if you are confident you can work with conduit and drill into the BREEZEBLOCK wall to mount. Might be good to do a Facetime call before to check details, to avoid wasting each others' time. Thanks!

I need the kitchen hinges fixed as they are hanging off and the lock up window fixing as I can't open it - the lock keeps swinging around.

It's an old lamp and it won't switch on at all. It was quite flickery before it cut out completely.

2 x metal dual sockets installed in 2 locations in living room, that are both near mains lights sources. Metal sockets need to match existing ones with the exposed piping. Would be good to see if I can get in the same style but with USBC included. but no probs if not. Just moved, on a very tight budget. Will order and pick up parts if you identify them, for me. Please be near Hackney to save on travel hours. Not in a a rush, open to offers.

My wooden venitian blinds need restringing on one side of the blinds as they have frayed and wont hold the blinds up.

Id like to install roller blinds that are 3 meters high

The string along the top of the blinds broke and needs to be fixed. I can’t open or shut the blinds as the string is broken. It looks like one part of the string needs to be threaded through a few blinds and then reconnected. Thanks!

Outside cupboard of my flat doorknob has been broken and falls off but now it seems someone has thrown it away so I have no access to the cupboard as you have to twist the knob to open it.

One of the wooden parts that holds our bed together (pull out bed underneath a single bed), has broken. We need someone to repair or replace it.

I've had a new shower installed which required the shower screen and one large tile to be removed. The shower is fine now but the tiling and shower screen has been attached poorly and needs to be redone.

My tilt-and-turn window has been mishandled while opening and is now stuck in an incorrect position. It is currently both open and tilted at the same time, making it impossible to close. I need someone experienced and comfortable working with a big tilt-and-turn window. Ideally, you have experience with Schüco windows or similar window systems. I also have a Schüco window handle that pops out the door if you'd be able to advise if a new handle is needed. Task details: Assess the issue and realign the window Ensure the locking mechanism and hinges are properly set Avoid damage to the frame or glass Bring any necessary tools Take caution Location: Hackney, London Budget: Open to offers - depending on the complexity of the fix. I'm unsure how to locate a mishandling button I'm finding on similar videos let me know if you need further photos or information for the project. Availability: ASAP Let me know if you have experience with similar repairs. Thanks!

Does have no sound and pitch black but green light is on

Toshiba TV model no 32W3453DB turns on green light is on, but screen is all pitch black and no sound.

Fix wardrobe , Mirror Sliding 2 door Wardrobe with LED Light (Black, 203cm)

I need a replacement glass panel sourced and fitted for a shower door. The panel required is 56.5cm x 170cm and require a similar looking one to the one in the photos attached