Find an experienced handyman in Inner South Melbourne

remove the loose render, re-render the damaged areas, then repaint the whole wall.

I'm replacing an old internal passage door knob and have already removed the existing knobs, spindle, fixing plates and screws. The old 70 mm backset latch is still inside the timber door and I haven’t been able to remove it. The latch moves freely towards the edge of the door, but fixed metal/brass projections on the latch body prevent it from passing through the existing edge bore. I don’t want to force it or damage/enlarge the door unnecessarily. I’m looking for someone experienced with door hardware/older Gainsborough-style latches who can: • Safely remove the remaining old latch mechanism without damaging the door • Install my supplied new 70 mm Gainsborough passage latch • Install my supplied Delf Marbella passage knob set using the supplied/compatible spindle I already have • Check the existing strike alignment and adjust only if required • Make sure the knob turns smoothly and the door opens, closes and latches correctly The door already has an approximately 54 mm face bore and 25 mm edge bore, with a 70 mm backset. All new hardware is already supplied. Ideally looking for an experienced handyman, carpenter or locksmith who is comfortable removing older door hardware and can complete the installation neatly without unnecessarily enlarging or damaging the existing door

Handyman needed for gate hinge repair & general gate maintenance The job will involve: * Inspecting and repairing the faulty gate hinge * Minor maintenance to ensure the gate is operating smoothly deally looking for someone with experience with residential gates, hinges and general metal/hardware repairs.

Removal of external render that has cracked around 3/4 - average height 20cms - 30m circumference of pool Re render the whole side of external under coping stone which has now been sealed

Looking for someone experienced with blind installation to install 2 brand-new motorised roller blinds on two higher-than-standard windows in our home. The blinds are already supplied and ready to install. I have all brackets, screws and fittings, and as they are motorised there are no chains or manual controls to install. The job is simply to: * Mount the supplied brackets securely * Fit the two roller blinds into the brackets * Check they are level and operating correctly The windows are positioned above/adjacent to a stairwell and are higher than normal, as shown in the photos, so you will need to bring your own suitable ladder/access equipment and tools. No electrical work or blind assembly is required. Ideally looking for someone who has installed roller blinds before and is comfortable working from a ladder indoors. Please include your experience and confirm you have suitable access equipment when making an offer.

Need this installed- someone handy with a drill and follow install instructions. See all pictures of parts included and how it looks. A local tradie in Cheltenham

Our sliding door lock has come undone. I've done my best to fix the metal plate in place for now but the lock is pulling open still when 'locked'. Not sure if it's missing parts or maybe needs replacing. Would prefer to fix rather than replace

Require fly screen to be patched after damage from a cat.

I would like someone to come help assemble a kids outdoor climbing gym and slide and also help take away rubbish. See attached photos.

Had a roof leaks over car port that's now repaired. Need the water damaged ceiling and edges repairs.

The fan has stopped working. Brand is Arlec but any similar fan will do. Is wired to run when the bathroom light is on

Bed frame has been assembled bit screws and left over and the bed sways and isn’t put together firmly

Install DIY blinds curtain in my bedroom. Height of room 3.2m, width of wall 3.5m

I have two new Hoselink Reels to be installed. The wall they are to be attached to is brick. Also remove one existing bracket from the previous hose reel. You will need to provide your own drill and tools… hammer and socket set.

I have a new letterbox i need attached to wall. All screws and pieces available per photo; need a skilled trade with a hammer drill to do a quick and clean job. Want to affix letterbox below intercom

Damaged wall that needs to be repaired 80mm lenght by 40 mm wide, needs to be repaired then return to sand and color watch 1 wall ceiling height 2.7 m by 3 m wide. This is a customers house we accidently damaged just text or email quotes please

Our Roman blind is broken - one of the strings/threads has snapped. I need someone to come to our house and fix it, ideally Wednesday or Friday this week.

Install 7 honeycomb recessed blinds of varying sizes. Please see pictures for dimensions.

Need a large telescopic dog door installed into an external wall (plasterboard internal side, weatherboard external side). Looking for someone experienced with cutting into and framing a wall opening, and finishing/sealing both sides neatly ensuring a weather-sealed finish. Details: Dog door supplied by me (large/telescopic size) Wall type: plasterboard (inside) / weatherboard (outside) Own tools required When: Saturday 15th or Sunday 16th August Location: Bentleigh, VIC

Looking for a handyman to fix or perhaps replace the door hinge in my kitchen cupboard. Easy job.