Install easyshed skillion roof shed 1.51m x 2.25m x 2.1m on existing concrete slab. I'm not sure on price so please make an offer

EasyShed installation on existing concrete slab. 2.25m x 0.78m Flat Roof Garden Shed. Preference for EasyShed verified airtasker.

Build a 2.5x1.5 easy shed

Easy shed comes in a flatpack. Erect/install 4.5m x 3m shed on slab.

I have an easyshed bike shed that needs to be set up. 2.25m x 0.78m Bike Shed

Assemble a flat pack Easyshed, 3 x 2.25 tall height garden shed, have concrete slab, concrete fixings, DIY assembly

Assemble a Easyshed narrow slider-door shed 2.255m x 0.9m on a pre-existing level gravel grid base on the side path of a house. The permeable base is already laid but you will need to ensure that the frame sits perfectly level so the sliding door aligns correctly. The grid is filled with 10mm angular blue metal aggregate over a geofabric membrane with compacted fill below. The shed will back on to a wooden perimeter fence with a 50mm gap. I will supply start pickets and brackets (X4) in order that you can anchor the shed frame through the gravel grid into the ground below. the shed is already on site in a flat pack. It contains two Easyshed skylight panels for the roof. The site is easily accessed via the side gate to the property. Assembly could be conducted in the nearby flat front driveway or the rear garden. You would need to bring trestles //saw-horses on which to safely conduct the assembly. I will be able to assist when necessary with tasks where a second person is required to help lift or position or steady panels when being moved into position.

I’ve got a 2.25m x 1.89m Skillion shed and I have completed up to Step 5, Pt 1 with all the panels assembled. The door needs to be attached to the front panel and then all the panels put together to create the shed and then secure to the concrete slab (I have the attachments). experience with Easyshed sheds preferred. Friday or Saturday only please.

I’m looking for an experienced handyman or shed installer to assemble and install a brand-new EasyShed Flat Roof Garden Shed (Model EF-S1508) at my property in Malvern East. Shed details: * Model: EasyShed EF-S1508 * Dimensions: 1.51m (W) × 0.78m (D) × 1.82m (H) * Brand new, supplied flat-packed with assembly instructions * Concrete fixing kit already purchased Scope of work: 1. Fully assemble the shed according to the manufacturer’s instructions. 2. Position it on the existing concrete surface (location marked in the attached photo). 3. The concrete surface has a slight slope, approximately 25mm height difference across the 1.5m width. Please allow for suitable levelling using durable, non-compressible packers/shims if appropriate. 4. Securely anchor the shed to the existing concrete using suitable fixings. 5. Ensure the shed is level, stable, the door operates correctly, and the installation is weather-resistant. Important notes: * No new concrete slab or cement work required. * The existing concrete drainage slope should be maintained. * Please bring your own tools and any suitable levelling materials. * I can provide the shed assembly manual and photos beforehand. Please include all labour and any additional levelling materials in your offer.

Assemble x 2 narrow garden sheds

I need a new easyshed built, including anchoring to concrete. Looking for someone who has built these before.

Assemble and install a 3.0 m × 3.0 m gable-roof EasyShed kit (product link provided). Kit will be on-site. Required work: unpack and assemble full kit per manufacturer instructions; bolt/anchor shed to existing concrete slab (see photo) using suitable anchor system into concrete (bolt or chemical anchors as quoted); remove and dispose of packaging and offcuts; ensure shed is levelled and sealed to prevent water ingress. Site notes: concrete slab in photo is approx 3.0x3.0 m with timber garden edging around one side; Access: standard backyard access; some vegetation and fence near slab - see photo. I have already ordered the anchors for concrete. Customer requests installer to remove packaging and take away waste. Product link: https://easyshed.com.au/products/ gable-roof-garden-shed-3m-w-x-3m-d-classic? variant=***94239.

Need installation of easy shed. 3*3.75 m along with skyroof provided by Easy shed to be installed. We will remove the existing shed but need assistance with cutting it into half so we can dispose it in hard rubbish. Installation on concrete slab

Need to remove existing shed and install a easy shed of dimension 3*3.75 m// Existing shed is 2.30*309 m The new shed will have a sky rood provided by the easy shed to be installed as well.

EASY SHED 3X2.25 ONTO A CONCRETE SLAB ALREADY IN PLACE

Assemble 3 m shed on concrete slab

Hi we bought a shed from easyshed and need it assembled on site. It is 3 x 3 with a 2.4m pitched roof on a concrete slab

Assemble an Easyshed shed (1.5m x 0.78m Flat Roof Garden). All parts have been prepared, the job is just to assemble the pieces together and fix to the concrete base, which has already been poured.

I have purchased a 1.5 metre wide easy shed..off the wall type..need to put together the shed..it will be going on top of large tiles that are already laid down.. Will require to cut 2 small holes in the side of the shed to fit around the gas pipe..pls refer attached photo

We are based in McKinnon and having our shed delivered this Friday morning 26 June. Ideally the shed is built between then and the end of the weekend. Sat afternoon is perfect if possible. 2.25m x 1.5m x 2.1m skillion roof. Assembly only – to be built on our paved area but NO anchoring required we'll fix it ourselves. Proven experience with EasyShed is essential, please don't quote without it.