Find professional garden shed repair in Inner South Melbourne

Stratco stubby 3x3 to concrete slab (already poured)

Small garden shed Easy Shed Approx 2.2 x 1.5 Cement slab exists

Shed size: 3.0m (L) × 0.78m (W) × 1.82m (H) Narrow, long shed Comes with timber base Scope of work: Assemble shed panels and frame Install onto prepared, level base Secure/anchor shed to base Ensure doors align and open/close properly

I am looking for an experienced handyman/assembler to prepare a site and build a new metal garden shed in my backyard. The Shed: * Type: Skillion Roof Metal Garden Shed (see photo) * Dimensions: 2.25m (W) x 1.51m (D) x 2.14m (H) * Status: Brand new in box with all instructions and components provided. The Site & Prep (Important): The shed needs to be installed in the back corner of my yard (see attached aerial photo). * Current state: The area is a garden bed with a rock border and some small trees/shrubs. * Requirements: I need the Tasker to clear the immediate footprint for the shed, level the ground, and handle the rock border/soil in that specific corner. * Base: The surrounding area is paved. I don’t need a floor as it’s just a garden shed. Tasker Requirements: 1. Must have own tools (drill, riveter, ladder, spirit level). 2. Proven experience assembling flat-pack metal sheds. 3. Ability to clear/level the small garden section. 4. Must secure/anchor the shed properly for wind safety. 5. Please take away the cardboard packaging/rubbish once finished.

I need someone to remove and dispose old garden shed, so we can put in a new shed. Shed dimensions 230 cm x 180 cm

Easyshed 1.5mx1.5m garden shed

Assemble new 3000 wide x 750mm deep new garden shed from Bunnings

Build garden she 1.7x0.9m on an existing slab

Looking for someone experienced to assemble this flat packed metal garden shed in our garage. https://www.amazon.com.au/dp/B0F6SMQW6H?ref=ppx_yo2ov_dt_b_fed_asin_title Details: Galvanised steel shed (panels + screws) Assembly indoors on flat concrete garage floor My husband will be with you to assist with assembly. No anchoring required. Requirments: Experience assembling metal sheds Own extensive tool kit(drill etc) - no drill available at property Careful with alignment and skilled in adding extra holes if required - doors must close properly etc

I need an EasyShed 3.0m x 1.5m skillion roof shed assembled. The site has already been prepared. The shed will sit on levelled bricks placed over compacted ground and does not require a concrete slab. The installer will need to: • Assemble the EasyShed according to instructions • Position it on the pre-levelled brick base • Secure the shed using the supplied metal anchor pegs • Ensure doors align and structure is square The brick base has already been levelled and laid out to suit the shed footprint. Photos of the site are attached. Location Beaumaris VIC Timing Flexible – anytime in the next few days. Tools required Installer should bring standard tools (drill/driver, level, etc.). Notes • Shed is brand new in box • Base preparation already completed • Good access to the site Previous experience with Easy Shed necessary.

Small garden shed approx 2.2 x 1.5

Assemble and Install new garden sheds on the newly concreted area Dimensions - approx. 6.1m W x 1.1m D

I am looking for an experienced handyman/assembler to prepare a site and build a new metal garden shed in my backyard. The Shed: * Type: Skillion Roof Metal Garden Shed (see photo) * Dimensions: 2.25m (W) x 1.51m (D) x 2.14m (H) * Status: Brand new in box with all instructions and components provided. The Site & Prep (Important): The shed needs to be installed in the back corner of my yard (see attached aerial photo). * Current state: The area is a garden bed with a rock border and some small trees/shrubs. * Requirements: I need the Tasker to clear the immediate footprint for the shed, level the ground, and handle the rock border/soil in that specific corner. * Base: The surrounding area is paved. I don’t need a floor as it’s just a garden shed. Tasker Requirements: 1. Must have own tools (drill, riveter, ladder, spirit level). 2. Proven experience assembling flat-pack metal sheds. 3. Ability to clear/level the small garden section. 4. Must secure/anchor the shed properly for wind safety. 5. Please take away the cardboard packaging/rubbish once finished.

Three sides of a shed painted. Paint already bought

Concrete slab (0.8m x 2.3m) to be laid to fit (Easyshed OTW shed 0.78m(d) x 2.25m(w) x 1.95m(h)).

Paint and Caulk newly made garden shed inside and out. Paint and caulk supplied. Use your own tools.

Seeking to have a garden shed installed in my backyard on a flat concrete slab. 3m x 3m

Garden shed installation Shed size 3.75x 0.78 Suburb : bonbeach

Hi AirTaskers, we live in St Kilda East and want to get 2 sheds for the side of our house. Is there any difference in quality between EasySheds and Stratco sheds that you are aware of before we purchase? These are the two sheds: https://easyshed.com.au/products/narrow-slider-garden-shed-3m-w-x-0-78m-d-classic?variant=40701903044767 https://www.stratco.com.au/au/sheds--garages/garden-sheds/handi-mate-garden-sheds/handi-mate-locker/handi-mate-locker-2.91x0.85-slate-grey-shmlsddhmlsg/ The sheds will go up against the brick wall of the house. There is an existing concrete base but it appears to not be level. (Water run off?) Just after a quote to install the 2 sheds and if you can help with levelling the base if that is required? Also there appears to be a narrow gas pipe which we would have to work around. See 2nd Photo The 1st photo is where we would like the sheds to go. Any help would be greatly appreciated. Please let us know if you need any more information... Cheers Jon and Christina

Job: Assemble a Giantz Garden Shed (2.31 m × 1.31 m, metal, double-door model – see photos). Location: Bentleigh East, VIC Date: Flexible – prefer within the next week or two. Details: Looking for an experienced Airtasker with a solid track record in assembling metal garden sheds. The job involves unpacking, assembling, and securely fixing the shed on an existing flat concrete base in our backyard. No need to lay concrete. Will already have a base. Requirements: • Proven experience assembling garden sheds (please include photos or reviews of previous jobs). • Bring your own tools. • Must ensure doors open/close smoothly and the shed is properly aligned and secured. Photos attached for reference. Budget: Open to reasonable offers based on experience and completion quality.