Find trusted curtains & blinds installation experts in Inner South Melbourne

Need to install blackout blind on one my room window . The width of window is 170 cm . There is currently a rod for curtain which needs to be replaced with blackout blinds.

Install curtain rack on wall and hang curtains. Professional rack and custom made curtains, so need experience hanging this specific type of rack.

I’m looking to get some curtain tracks installed at my office near Southland (Bay Rd, Cheltenham), and I also need alteration work done on the curtain panels themselves. Hoping you can help with both, or point me in the right direction of another tradesperson? Windows/walls: - Wall 1: 3370mm - Wall 2: 1300mm Curtain panels (sheer S-fold): - Panel 1: 4500mm (for Wall 1) - Panel 2: 2100mm (for Wall 2) Both panels are wider than the walls they're for, so along with installing and cutting the tracks to size, I'll need each panel taken in to match — removing the excess hooks and header tape and re-hemming the side so the spacing sits evenly on the shorter track. Could you please let me know: 1. Whether you do both track installation and this kind of width alteration? —- 2. Cost for supplying/installing 2 tracks (cut to the sizes above) plus altering the 2 panels —— 3. Turnaround time —— 4. Whether you need me to bring the curtains in, or can quote from photos/measurements first —— 5. Would it be better for you to come on site to quote and also to sight the curtains? Thank you!

I need curtains hung in my bedroom. Two windows that meet in a corner, the curtains are floor to ceiling and will be wall mounted. I’ve removed the old blinds already. I’ve got the curtains & tracks etc already, I just need the brackets wall mounted and curtains hung please. Need to make sure they are hung straight and secure. The curtains are velvet and blackout so quite heavy.

I have a curtain track and s fold sheer curtains in a bedroom above a window. I would preferably love this be done before the end of this week. Any day is fine as I work from home every day

I need curtains on this window. Please measure the area, purchase the curtains from spotlight/bunnings (or let me know which ones and I will duck out and get them) and then install.

I have a few windows where I want to install curtain rods into existing pelmet space. I also want to saw an mdf shelf that is built around the sink pipes so I can take out that shelf.

Looking for an experienced person to source and install 2 “Tuiss” blinds to replace the ones in the pictures. Possibly to install more if happy. Please only people with experience with this product only.

I need 3 blind put up and have tried to do this myself but can not get the fitting to attach. I would need someone who has their own means to put 3 blinds up using the base fitting and perhaps using their own fittings to pop up. I am sure that if you know how to do this it should not be too hard.

I have 4 lots of blinds that I need installed in my lounge room. 2 of the blinds have a pulley system that needs to be fixed to the wall and 2 of the blinds are operated by a remote control.

Install Two Freedom Curtain Tracks and Curtains – Brighton VIC I’m looking for an experienced handyman to install two Freedom curtain tracks and curtains in my living room in Brighton, VIC. The full wall is approximately 3.25 metres wide, and the window is approximately 2.95 metres wide. There are two separate tracks: * One track for the sheer curtains * One track for the blockout curtains Both Freedom aluminium tracks are 3.6 metres long and will need to be measured and cut to the correct length. The job includes: * Measuring and confirming the correct track length and spacing * Cutting both aluminium tracks * Installing both tracks securely and level on the wall * Ensuring there is enough clearance between the sheer and blockout curtains * Installing the gliders and hooks * Hanging and adjusting both sets of curtains * Making sure both curtains open, close and fold correctly The tracks, curtains and included Freedom fittings have already been purchased. Please bring the necessary tools for cutting aluminium and suitable wall fixings if the included fittings are not appropriate. Please provide your availability, relevant curtain installation experience and a quote.

We have bought freedom Sheer curtains from Freedom, which we want them installed

Curtain rod holder for windows

I have purchased blinds and sheer curtains from DIY blinds. Need someone reliable with experience to install them across the house which includes: - living room - kitchen - 2x bedroom - study room In total there are 7 blinds and 5 curtains. Experience with installing DIY blinds is preferred.

Seeking a professional installer to remove roller blinds and install IKEA VIDGA single curtain. Access & Parking: - 5th floor, lift access - Allocated car park onsite, 2.2m height limit Scope of Work: - Remove & dispose of blinds, brackets, screws. Patch wall/ceiling with filler and paint. - With the leftover screw holes in metal window frames, fill with suitable metal repair filler, sand smooth, then apply appropriate primer/paint to achieve a neat finish. We can supply colour‑matched spray paint. - Measure each window onsite, cut rails to length, then fix. - Install VIDGA single tracks: fix into joists where possible, otherwise hollow-wall anchors, sufficient fixing points per track. Tracks level, even height, curtains sliding smoothly on straights/corners. - With joined rails (longer than 140cm), VIDGA uses a standard ceiling/wall fitting at the seam. 14 rails supplied (2 fittings ea) should cover this - plan spacing per run, flag if more needed. - We'll insert gliders/hooks and hang curtains ourselves. Details: - Areas: 2 bedrooms, living, dining. Total ~15m track. - Dulux Natural White matches wall/ceiling - buy similar, or we supply (let us know qty). - Most tracks sit in window recess; keep close to wall to minimise light gaps, leaving room to remove end cap for gliders/hooks. - Standard offset: 6cm from window frame. One 68cm track on metal frame; rest ceiling-mounted (plasterboard). - Living area has two 90-degree inside corners - fit VIDGA corner pieces there. Keep living & dining tracks separate. Track Lengths (approx): Bedroom 1: 68cm (metal frame), 181cm | Bedroom 2: 240cm | Living: 150cm, U-shape 176+271+132cm | Dining: 256cm We Supply: 14x VIDGA single rails (140cm, w/ ceiling fittings); 2x VIDGA corner pieces (single track, w/ ceiling fittings); 2x VIDGA wall fittings (6cm) You Bring: Tools (drill, hacksaw, level, roller, sandpaper), filler, primer, screws, anchors, drop sheets. Please provide: quote (labour+materials) and available dates.

Need to install this curtain divider straight onto the ceiling… see pucks for details…

Install curtain rod and curtains Install peep hole into front door

Looking for an experienced person to install curtains and blinds in a my 1 bedroom apartment. Tasks: - remove existing internal venetian blinds in the living room and bedroom - Install IKEA VIDGA ceiling-mounted curtain tracks in living and bedroom - Cut tracks to required lengths and install - Hang 2 sheer curtains on the tracks - Install 3 blackout outside mount roller blinds (1 in living room, and mostly likely 2 side-by-side in bedroom) - Ensure everything is level, secure and operating correctly Materials supplied: - IKEA VIDGA tracks and accessories - Sheer curtains - Roller blinds Property details: - Apartment with solid brick walls - Ceiling construction unknown (may be concrete/masonry) - Installer to provide own tools, ladder, drill, appropriate fixings & floor coverings - Experience with curtain/blind installation preferred I’ve attached pictures of the windows.

There are 5 windows that have pelmets as well as curtains and blinds. The remaining 4 windows have blinds only. I need them all removed by Tuesday afternoon (26th May) at the latest.

Install 9 to 10 roller blinds of various sizes in my home they may need packers to sit them off the wall which I dont have i have the blinds allready