Find an experienced handyman in Moonee Ponds

The net slider door has come out completely, need to be fixed so that it starts working fine. Also rubber from net door has come out, need to fix same as well

We have assembled this play gym and now it needs to be secured on the wall studs with the nuts /bolts we have. In case the wall studs does not align with the play gym holes, we would need to secure wooden plank first on the wall studs and then mount the gym on the wooden plank. We will provide the timber planks. We are looking for someone who understands how to use stud finder and have prior experience of doing such job.

I was doing delivery to one of the house in moone ponds apparently there was a nail underneath the wooden box and i dragged it so there is a scretch which needs to be fixed for a customer - Iam just putting $10 as need some quotes don’t worry about $10.

Replace the metal roller blind chain with a new one (potentially change the drive wheel/clutch winder if advisable)

Hi, I am looking for someone to cut down and screw plywood to a metal dining table frame (see blue cross frame pictured) for a stone substrate. I also need 7 door stops to be installed. I would do it myself but I am running out of time and need to move in asap. Everything is supplied and ready to go. I’ll be working at the house tomorrow (Sunday 4/10) however I will also be there after 4pm during weekdays if that works as well.

We need an experienced door installer or carpenter to replace the damaged white door and adjacent fixed panel at the rear of our shop with the red double-door unit shown in the photos. We already have the replacement doors and frame on site.

I have a window (rough measurement 80x140 cm) that needs a flyscreen installed. Preferably something simple and. It is not for security purposes.

The majority of work has been done with all the trimmings just need the final construction of the concrete slab done

I need two tasks completed: 1. Removal of existing bathroom sink and installation of freestanding vanity. 2. Tile regrouting for small areas of bathroom (shower walls, parts of the floor). This only applies to square tiles, we can ignore the mosaic tiles.

Our sliding barn door is stuck and won’t slide open at it appears the owners has removed the tracks. Looking for someone to come out, identify what’s causing it to jam, and get it sliding properly again. Ideally able to repair or instal the track/rollers if needed.

String broken on horizontal blinds

There was a bit of damage due to a previous condensation issue. The issue has been fixed but need to repair the water stain/mold patch on bathroom ceiling

I’m looking for someone experienced with installing IKEA VIDGA ceiling-mounted curtain tracks to complete the entire installation for me. I have 3 × 140 cm IKEA VIDGA single-track rails that need to be joined together to create one continuous ceiling-mounted track. My living room window is approximately 3.24 m wide, and the ceiling-to-floor height is approximately 2.43 m. I already have everything needed for the installation, including the VIDGA rails, ceiling fittings, gliders/hooks and IKEA SILVERLÖNN sheer curtains. You will just need to bring your own drill and appropriate ceiling screws/fixings. I would like the task completed from start to finish, including: • Joining and assembling all 3 VIDGA rails • Measuring and cutting the track to the correct length if necessary • Securely mounting the track directly to the ceiling • Installing the gliders and curtain hooks • Attaching and hanging all of the sheer curtains • Adjusting the curtains so they hang evenly and neatly • Making sure the curtains sit nicely at floor level • Making sure the track is straight, secure and the curtains slide smoothly Experience installing IKEA VIDGA or similar ceiling-mounted curtain tracks would be preferred.

Superlift GDO-5 garage door opener won't open, power is on but not activating.

Looking for somebody to install 11 knobs and 3 handles into new kitchen cabinet drawers and doors. Hardware supplies however person must bring their own tools.

Need someone with a circular saw to cut these two pieces of cement sheeting into smaller pieces.

Hang 7 doors and install handles, 2 upstairs and 5 downstairs. Doors, hinges and handles supplied. I have 3 hinges per door. They are standard size but maybe require some trimming

Purchased a XIN Power Tower and require for it to be assembled.

The door handle became faulty and had to be removed, so it needs to be replaced. I have a photo of the existing handles on the other doors. If you could bring one with you that is similar, that would be great.

I’m looking for an experienced plasterer or handyman to professionally repair a small hole in an internal plaster wall and repaint the repair. Requirements: * Patch the hole using a fast-setting compound suitable for completing the repair in a single visit. * Sand the repair smooth so it is flush with the surrounding wall. * Prime/seal the repaired area if required. * Paint the repaired section using the matching paint that I will supply. * Leave the area clean and tidy on completion. Important: * The repair must be completed in one visit using a suitable fast-setting product. I’m not looking for a repair that requires a return visit. * The hole is approximately 50–60 mm in diameter (see attached photo). * I will supply the matching wall paint. * You will need to provide all other materials, tools and equipment. I’m looking for a high-quality, professional finish where the repair is virtually invisible once completed. Please only make an offer if you’re confident you can achieve this standard in a single visit.