Find a professional local handyman in London

Service of the hot water storage heater and descale the cylinder. Upgrade the main control (the current one is very old) and wire in the additional immersion (the booster part is current unwired and need to be wire).

This is a plumbing works opportunity under a DPS/tender arrangement. The works may include installation, repair, replacement and maintenance of plumbing and associated pipework across different properties and locations. Requirements may include new pipework installation, repairs to existing pipework, water supply and drainage systems, sanitaryware, taps, valves and associated plumbing fixtures. Existing pipework may be present and access will vary depending on the property and work area. Contractors should be able to assess existing systems, identify the required works, provide suitable materials and complete the works safely and to the required standard. Further project-specific details, locations, drawings and specifications will be provided for individual works as applicable.

I’m looking for an experienced plumber/heating engineer to carry out full maintenance and cleaning of all radiators in my flat while the building’s communal heating system is currently drained. The flat’s heating circuit should be capable of being isolated from the communal system – this has been done by previous engineers. I would therefore like the engineer to identify and close the appropriate isolation valves before the communal system is refilled. For all radiators, I would like: • Individual flushing/cleaning to remove sludge, magnetite and debris, removing and flushing radiators where appropriate • General inspection for corrosion or leaks • TRVs and lockshield valves checked for correct operation/seizing • Valves, tails, connections and fittings checked and replaced where necessary • Bleed valves/vents checked • Any other sensible preventative maintenance while the system is drained • The flat/radiator circuit appropriately isolated and left safe before the communal system is refilled • Once appropriate, the radiators refilled, vented and checked for leaks and correct operation This is a communal heating system, so I am not requesting a powerflush or chemical treatment of the whole building system. The important requirement is that the necessary isolation and any work requiring the communal system to be empty must be completed before Monday, when the building system is due to be refilled. Please let me know your experience with communal heating systems/radiator maintenance, the flushing method you would use, and your availability before Monday.

Routine Maintenance: - Carry out regular property inspections and resolve issues. - Perform minor plumbing tasks (fixing leaks, unclogging drains). - Replace light bulbs, fuses, and small electrical components. - Ensure appliances function properly and address faults. - Handle touch-up painting, redecoration, and small repairs to walls, ceilings, and doors. - Respond to tenant maintenance requests. - Ensure compliance with safety standards.

Instal shower caddies Fix toilet seat Fix hot water dispenser (clogged with limescale) Leaking pipe Shower handle Stabilize coat rack

basic plumbing, basic electrics, painting, assembling, checks, etc...

We do have motion sensors and CCTV cameras installed few yrs ago. The person installed it was maintaining every year till last year. Our cctv camera monitor lost connection and during house renovation alarm system also got disconnected. I tried to contact many time the previous engineer but he unfortunately too a large amount of money as a deposit and did not come back unfortunately!!! any way I need an honest person with expertise in this friend who could come along and see the whole thing and tell me what I need to do now.

Grouting on two rows of tiles + fix new bath panel and tighten all waste pipe fittings.

Plumbing and sanitary maintenance 1.Remove and correctly replace the poorly applied sealant around the bathroom countertop and reseal neatly. 2.CHECK - Inspect the WC flush, which operates inconsistently. Inspect the condition of the flush button. 3.CHECK - Stabilise and correctly secure the bathroom sink pedestal at both the basin and floor/base as appropriate. Inspect the gap between the basin and pedestal and make good appropriately. 4.CHECK - Check the sink seal and surrounding kitchen-worktop area for water ingress. Check and replace mouldy seal surrounding bathroom. Lounge and Bedroom 5.Securely refix the wooden plinth supporting the lounge curtain rail, which is coming away from the wall. Check and reinforce the existing fixing points as required. Bedroom 2 flooring, window and blind 6.CHECK - Inspect the small cut-out section at the edge of the flooring. 7.CHECK - Inspect replacement of the missing plastic blind operating/twist pole if feasible. Kitchen units, worktop and fittings 8.Repair the loose hinge on the small corner cupboard. Tighten or repair any other loose kitchen cupboard or door handles. Bathroom general repairs 9.Tighten the loose bathroom-door handle. 10.Remove the additional chrome hook from the tiled wall. 11.Repair the chip and fitting-removal mark beside the ceiling spotlight. Fill, prepare and locally touch up the ceiling; full ceiling decoration is not required. General decorating and making good 12.Replace missing Bedroom 1 floor beading 13.Fill and touch up the Bedroom 2 wall chips and other obvious fixing marks.

1. Take apart and properly rebuild a bed frame 2. Put q coat rack on back of wooden door 3. Maintain 9 sash windows (cleaning, lubricating (we have lubricant) and in limited places where paint is flakey, sanding and repainting

Tree in garden needs maintenance Type of gardening: Hedge trimming, Garden cleanup, Other Size of garden: Under 50m² Has green waste bin: No

We are looking for an experienced self-employed handyman to carry out minor maintenance across multiple houses in Wandsworth. Day rate £180 Need to be self sufficient with vehicle and tools. Property 1 1) Bedroom 2 - plug socket needs fixing back in place. Property 2 2) Bedroom 3. New bed base wheels are delivered to the house addressed to ‘Shane SLiQ’. Check all wheels, replace as necessary. Property 3 3) Top floor shower riser clamp not gripping, repair or replace. Property 4 4) Replace toilet seat ground floor shower room, access from kitchen. 5) Move blue lockbox from the under stairs cupboard to tall kitchen cupboard. Property 5 6) Bedroom 3 - Wardrobe drawer base come out and side rail bent. Remove all tape, fix properly, and get drawer sliding smoothly. Property 6 7) Front door lock sticking when you try to unlock it. 8) Bedroom 4 wardrobe needs securing.

Change broken toilet seat, fix a new curtain rail in 2 rooms. General property maintenance

I've built up a backlog of small household jobs and would like them done in one go by someone reliable and tidy. Roughly a full day's work. Just as importantly, I'm hoping this becomes a longer-term arrangement. I'd rather find one person I can call whenever something needs doing than start from scratch each time, so trust matters a lot to me. If this first day goes well, there will be steady work. The list covers four areas: Decorating and repairs: touching up paintwork on the staircase woodwork, including wood filler where needed. Filling, sanding and repainting a stained patch of ceiling. Re-caulking two bathrooms. Mounting and hanging: living room curtains, several mirrors and artwork around the house. Walls are a mix, so the right fixings for plasterboard and masonry will be needed. Smart home and security: fitting smart cameras and bulbs, removing a redundant outdoor Yale alarm box and replacing it with a SimpliSafe bell box and plaque, plus opening an outdoor key safe. Odds and ends: swapping a burr in a coffee grinder, repotting houseplants. You'll need your own tools, including a drill, ladder and basic decorating kit. I'll supply all materials unless you'd rather source anything yourself. Good communication and turning up when you say you will matter as much to me as the quality of the work. Happy to walk through everything at the start and then leave you to it. Splitting it across two shorter visits is fine too. In your offer, please tell me roughly how long you think the list will take, whether there's anything on it you'd rather not take on, and whether ongoing work appeals. Photos of the staircase, ceiling patch and alarm box available on request.

Treadmill may have been damaged by collapsing ceiling. Needs to be checkrd out so that it is safe to use.

My Siemens iq300 dishwasher no longer turns on. I have replaced the fuse in the plug and left it unpowered to reset but it seems to be dead. Would like someone to take a look before I get rid of it and order a replacement.

Replace kickboards (3m approx, in a straight run, we will supply, two metal grills for ventilation to be cut in to kickboard). Integrated washing machine needs changing from fitted plug to hard wired), re-line up fitted appliances to bring kitchen back to spec. Contact me if you're interested and i can send photos/details before we agree a price

I need someone to service an Envirovent vent system my flat. Not just change the filter but that can be included depending on the quote. EnergiSava250

Split AC system in my 3 bed flat - needs repairs Parking provided Outdoor Unit floor mounted on balcony – Easy access Indoor Units accessible but can be removed from wall System Make: Samsung (2019) Refrigerant: R410A Piping: Liquid Pipe 6.35 mm / Gas Pipe 9.52 mm Indoor Unit (4): AR09RXWSAURNEU Outdoor Unit (1): AJ070MCJ4EH/EU All Units power up and system functions. After 10 - 20 mins the Indoor Units will stop and will display the following Error Codes: Error E2 01 - Issue with one or more of the Communication Cables that run between the Indoor and Outdoor Units (F1 F2 ports) Error E5 59 - Thermistor on the Outdoor Unit may be faulty and requires replacement TASK 1 - Resolve E201 (Communication Error) Voltage test all 8 (2 cables per unit) cables at both ends (Indoor & Outdoor) to try and identify the damaged cable(s) If necessary, run new cable between the Indoor & Outdoor Units to identify the damaged cable(s) Once the damaged cable(s) have been identified, you will need to run new cable between the Indoor & Outdoor units and hide this cable as is practical. This may involve cutting holes into the suspended ceiling in order to run the cable Any Making Good is outside of scope I will provide a 50m Drum of 3183Y Cable TASK 2 - Resolve Error E5 59 (Replace Thermistor) Replace the (Supplied part DB95-05268A) Thermistor on the Outdoor Unit TASK 3 - Re-Mounting the Indoor Units I‘ve now had fitted Wardrobes installed in 3 Bedrooms Much of the air now hits the tops of the wardrobes so less effective Need to re-position these 3 Wall Units so they are 550mm from the walls We can agree brackets and materials Prep for disconnecting Indoor Units (coolant back to Outdoor Unit) Remove Wall Units from the wall Disconnect pipework and cables from Wall Units Extend pipework and cables by as needed Install wall brackets Check / Maintain each Wall Unit (Air Clean / Coil Straightening) Mount Wall Units onto brackets Re-connect pipework and cables Test system

Quite a simple job, as I was cleaning the kitchen sink, the plughole dosen't seem to attach to the drain anymore, I think it's just because the filaments got used in time. And as we're doing this I was thinking to might as well do a cleaning of the sink unit. There is a hardware store 2 mins from my building in case we need replacements.