Find experienced local tradies in Collingwood VIC

Need someone to come apply plaster over joints on: two joints of fibre cement sheet with two 90 degree intersections on the wall (3m high) + joins of 1 aqua check board. Is a kitchen wall that will have tiles - sheets about 3m high and no need to do ceiling joins. Expect some wall prep might be needed on old walls Please quote materials & labour

I need a 65 inch tv mounted (fixed) to a wall. Samsung 2025 model Normal drywall apartment. I also need a soundbar mounted with two brackets. I have both the mount and bracket supplied. I am having the tv delivered Saturday morning, so anything after 11am-ish would suit !

Need to repair damage to corner of gyprock wall and repaint. Is only a small area.

Looking for a licensed electrician to carefully remove existing power points installed on a wooden shelf and make the wiring safe by properly disconnecting the live wires.

The power outlet for my fridge/freezer is not recessed and is in an inconvenient place. I’ve bought a recessed point from Bunnings to be installed so that the fridge doesn’t hang out of the cabinet as much: https://www.bunnings.com.au/repelec-recessed-white-single-gang-wall-point_p4331257

Just had massive water damage just need to put another sheet. And cut hole for the light make it look pretty.

Repair needed for internal plasterboard wall, around 6 x 8 cm hole. Will also need paint matching.

I have two small dents in my rental apartment. Exit inspection is on 4/8/25 1st dent is due to door handle banging the wall a couple of times. It is about 10mm diameter. This is the key work I need done. 2nd dent is on the ceiling and is triangular in shape with shorter sides both about 10mm from what I can see. Fixing this is optional. I cannot say with great confidence what the walls and ceilings are made of but looking at the damage it appears to be plasterboard

A shelf mounted into a plasterboard wall has fallen off and needs a minor plasterboard repair and remounting. There are two holes per bracket. Bottom holes seem intact

Have had this crack fixed multiple times and it keeps opening up again after a while. Section to the right of the crack is quite springy when you push on it. Would like it fixed up again so it’ll last a bit longer if possible. Would like it painted as well, can supply the correct paint (Dulux natural white low sheen acrylic)

Moved into rental with double sliding doors. Looking at modern pet doors.com.au patio lock model. Need measuring and customizing plan, then installation as required. Will need extension pack but may need additional work to reach height of door frame.

Hole in some drywall, need it to be patched up and the wall painted over if nessary. 3 spots in house that need fixing

Plastering & Painting Job – One Room (Must Be Completed Thursday) Have someone to help with hanging Looking for a plasterer and painter to complete the following in one room: ✅ Entire ceiling to be plastered – base coat and topcoat to be applied on all joints ✅ 90mm cornice to be installed all around the ceiling ✅ Hole in the wall (740mm W x 560mm H) where an air-conditioner was removed – needs to be blocked, base coated, top coated, and painted ✅ Manhole bracket to be installed ✅ Plaster to be screwed directly onto existing timber on the roof and into the bearers ✅ Room size: 3.5m x 4.8m ✅ Walls do not need plastering – just a light sand, clean-up, and full repaint ✅ Paint will be provided This job must be completed on Thursday – non-negotiable. Please provide a quote or contact me for more details.

Resurface a pink bath to white

The winding chain (looks like a bike chain) on the elbow of one side is broken so the awning opens crooked. Can anyone fix this? I’m trying AIRTASKER first.

I’m looking for a plasterer who can come and patch up and repaint 3 small cut outs (largest is about 10cm x 10cm) from the ceiling. Also repaint.

Had a plasterer no show today. Looking for an experienced plasterer to hang 4 sheets/ finish and patch two holes in Collingwood today. I have 3 sheets onsite but will require to bring one more.

I assembled a 3m awning for my balcony, then realised there aren’t studs where the 8cm awning bolts (photo attached) need to go in. The awning will sit on the red wall above the window - see photo. I believe the only way it can be safely mounted is by attaching a 3m long, 6cm thick board onto the wall with 8-10 screws and anchors, then bolting the awning onto the board to evenly distribute the weight. Similar to how a TV can be mounted onto plasterboard using a supporting board - photo attached. Also open to other ideas to ensure maximum reinforcement. Bunnings is 5 mins from my place - I can acquire screws/bolts/anchors etc but the 3m timber won’t fit in my car so I’ll need you for that. Ideally looking for someone on the afternoon of Sunday 27th, otherwise the days following are an option.

Render repair to exterior of two storey terrace.

Have basement car spot in my apartment building and need power to connect charger for my electric car