Find experienced local roofers in Malvern VIC

Replace roof, front and door of a garden shed

Supply and install roofing seal paint to the allocation box gutter around 8m in length 3-4 coats - see photo 2. Supply and install additional flashing to the water collection box gutter to allow water to fall correctly see photo with the down pipe - plus do whatever will bring this box gutter up to code see photo 3. Supply and install new downpipe spreader to allocated rainhead - it’s a little short see photo 6.

Cracked pointing on roof, needs to be fixed in a few places

Hang fishing wire from gutters and brickwork to nearby trees to create a grid for paper lanterns and decorations for child’s party. Need a very high ladder - more than 6ft standard ladder. Fishing wire to be able to support the weight of paper lanterns and floral decorations

Clear leaves from the internal gutter and bullnose. Single story house and roof can be accessed from the bullnose. You need your own ladder. The leaves can go in our large green bin.

Clean gutters to 4 sides of single story, single fronted house and one side of single garage. You will need an extension ladder as one side of house is slightly higher than the other (natural fall of land). Please provide photos once work is complete.

I bought an apartment but didnt know the soundproofing is terrible! I can hear when my neighbour sneeze, talk and worse when he ons the music in the middle of the night- i can hear it from my unit :( The whole wall adjacent to his needs to be soundproofed - it is 3.7m for bedroom and 4.7m for living room.

Looking for an insulation installer to install ceiling insulation batts in an existing single-storey home. House approximately 115m² Existing roof space currently has no insulation, I will supply the insulation batts (Earthwool R6.0) Roof space is accessible lots of space to move Vacuum and clean roof space prior to installation, including removal of dust, debris and any loose material where practical Install insulation throughout the entire ceiling area Ensure neat installation with full coverage and no gaps Clean up and remove any installation waste

A possum has got into our roof (single storey house) - looking for removal of possum that is still alive

Silicon/waterproof our milk jug rinser, and a gap near our dish washer

We have some gutters that need cleaning. Would like all mess taken away.

Bag up and Remove old dusty insulation from attic and replace with new insulation. Attic is accessible by indoor pull down ladder in the ceiling. New insulation is already in the ceiling ready for installation. Approx 30sqm

The joints between the bottom of timber door frame and the stone terrace/balcony tiles are no longer waterproof due to failing ir damaged sealants. Rain water can seep underneath the door frame through the gaps in the sealant. Tasks required: 1) removing failed sealants 2) create a flexible waterproof joint - using exterior waterprrof and UV resistant sealant to seal door frame base; 3) Prevent pooling of water around the joint Two door frames : one at the terrace and one at the balcony. See photos.

A couple of the interanl brackets have broken and the roof doesn't close or open bropery. I am selling the car so I need to have it fixed please.

Enclose 1st floor apartment balcony with cat proof netting. Supply materials and install. Size of opening. 3.7m wide x 2.6m high. Perimeter of opening to be fully sealed off with netting, ideally using a tasteful looking white painted frame attached to floor, side walls and ceiling. Netting to be correctly tensioned to avoid bagging.

Looking for someone to clean out the gutters on our house. Gutters need clearing of leaves and debris to ensure proper drainage. Details: Single-storey house Gutters around the full perimeter Please remove and dispose of all debris Flush gutters and downpipes to ensure they are clear Bring your own ladder and tools

Property: Single-storey residential home Roof Type: Tiled roof Roof Area: Approx. 85 m² Roof Pitch: Approx. 16° Scope of Works: Re-bed and re-mortar ridge caps to the existing tiled roof. Clean all moss, lichen, and debris from tile faces prior to commencement. Remove loose or failed mortar and re-bed ridge caps as required to ensure correct alignment and support. Re-mortar all ridge caps to provide a neat, durable finish appropriate for tiled roofing systems. Access: Single-storey roof with standard residential access. Requirements: Demonstrated experience with tiled roof re-bedding and re-pointing works. All works to be carried out in a tidy manner, with site left clean on completion.

This is a two-level house in Malvern, with colorbond/metal roof. Access to the top roof can be via a lower roof from the ground level (as photos suggested). Upstairs ceilings has two water stains, one in bedroom and one in hallway, looking like a minor roof leak. We need a qualified roofer to investigate the roof/gutter and conduct necessary repairs. Please quote on the price structure when we speak or via reply.

Remove and Replace Laserlite Clear 2000 to small rear pergola.We shall supply Laser light,Screws and Noise stop tape. Use the existing polycarbonate as template. You will need appropriate ladders etc.

I need help reducing noise transmission through my apartment office window. The goal is to improve privacy (so voices don’t carry outside) and block external noise coming in as well as improve the insulation with filling any air gaps Window details: • Size: approx. 1.2m width x 2.0m height • Large single-pane style, aluminium frame (photos attached) I am looking for internal improvement options only at this stage Please provide: • Your recommended approach • Quote (materials + labour) • Examples/photos of similar work if available