Find an experienced handyman in Ascot Vale

Kitchen doors need adjustment and realignment. 5 cupboards realign. Some might need remounting.

I need two things done: 1. One of the pillars supporting our laneway roller doors is tilting. We want to strengthen this pillar somehow so that it remains straight. (The garage door gets stuck if it goes all the way up) 2. (Small fix) our Merlin weather drive unit has an error code showing, and it doesn’t work. It’s flashing code 2

Degrees hung up and sign nailed into desk and wall hooks rescrewed

Installation of x1 Honeycomb Blind in a home. Hardware and instructions provided. Simple tools like electric drill needed for installation. Basic steps: 1) create pilot holes for screws, 2) screw brackets onto frame, 3) click headrail into brackets.

I would like to replace this chandelier with a new one, probably 7.5mt height.from floor to ceiling.

I’m getting larger TV so need to move these shelves (4-6 tbc) wider apart. Then to plaster and repair the damage. No painting required, just ready for painting

I need a licensed mechanical services plumber to install a Scandia 200 Warmbrite and flue at my place in Ascot Vale. I will need a certificate of compliance and instillation. I have 12mm tiles for the hearth, I would love the person to be able to cut and place them too! There is no room access so will need to remove a roof sheet to do the works! Thanks!!

Door hinge has dropped preventing door closing. Appears to be metal hinge in metal frame (ie no visible screws to tighten). Will likely need replacing. Need fixed ASAP as preventing us using room in business.

I have an internal brick wall that has crumbling mortar because of moisture. We need the following done: 1. remove skirting, we want to reattach it later. It is secured by screws that won’t come out. Have tried using screw removal but no luck 2. Insert dryrod damp proofing rods along the bottom of the brick wall, which are inserted into the mortar. I already have purchased the dryrod damp proofing rods. 3. Re-point the mortar in the wall where it has come off. The width is about 3M, and up to 90cm high at the highest point 4. Re-install the skirting board

La luna patio sliding pet door install

Install pet door insert With security latch and all pieces (have all pieces)

Installation of 10 x Door Handles (including 3 with privacy buttons). Each door will need to be adapted to imbed the latch plate, as will each door frame as the footprint is different to the existing fittings. Pictures of existing footprint and new fittings that need to be installed are provided. Woodwork is required here for each of the 10 x doors.

I need my old blinds taken off on the kitchen window and need a cordless roller blind installed. It is 120cm x 210cm

I’ve been involved in a minor accident and need some help replacing my bumper, left guard, fender, lights. I already have the parts required.

Looking for quotes on building a semi permanent gym platform to have a cage on top. Needs to be low profile. Old post expired by accident. This will be in a garage with between a 3-4 degree slope so has to be level.

Install door hardware on 6 internal doors. All old hardware has been removed. As most of these doors are old and may need to be filled where old hardware was removed from, before replacing with new hardware. One door is new.

I need a honeycomb blind which is hard to put up repaired. The blind can be pulled down on but it takes over one minute to put up with a lot of pushing and pulling and difficulty. Sometimes it won’t go up at all. It’s easier just to leave it down.

I have two Vendlines that need attaching to a plaster board wall . Each 80cm long.

I need a handyman to install 2 locks for my front door. 1. A chain and bolt lock 2. A secure dead lock to the door frame. Locks are these two - https://www.amazon.com.au/dp/B00SFXOC4E https://www.amazon.com.au/dp/B00D2K367Y?th=1 You must have your own tools and this is probably a 10 mins job.

PLZ HELP a girl out.Need to remove trim on door to install glass into electric sensor rails