Find a professional local carpenter in Gospel Oak

Our survey has identified some asbestos boards in our electrical cabined. Those need to be removed before installing a new fuse box. - Due date: Before Sunday, 10 July 2022

IVE GOT THE HOUSING FOR WORDROBS JUST NEED TWO FULL SHEET MDF DOORS MADE PLEASE ASAP

I have a storage small plastic roofing on top of my flat. It's been three years since I build it. I need to recheck this and fix any unsecured area. First, need to visit and let me know If I need to buy any item for the work. Sunday 10-11AM

I've got a strip of 15mm varnished plywood just over 2m long, 16cm wide, eg quite long and narrow. I need a tiny bit planed off the length edge, the amount to be planed varies - eg c.7mm at the top, down to about 1-2mm at the bottom. (see photos for reference). This is a thin sliver, but i need a good straight line, so my sanding tools are not suitable. It needs to fit into a pre-existing cavity which cannot be re-sized. A strip of masking tape is on the wood as a cutting / planing guide. I just need the tiny edge planed off, retaining the same smooth edge ideally.. Note: this is a small job and better carried out in situ at my property (London Kentish Town area) to ensure a snug fit in its intended location. thank you.

Hello, We have just moved and need some shelves fitted (the cupboard space already exists) and potentially a cabinet and a long desk (a simple design to allow for 2 people to work alongside each other) We are thinking to use ply but open to other cost effective solutions. - Due date: Before Sunday, 6th Feb 2022

I need help with constructing a garden frame in order for me to grow pumpkins. This will include measuring out the space chopping the wood and constructing it all together.

I need someone to bring some wood material and some screw/nails to cover up some small gap in between two of my rooms. The material however much used will be paid separately Sunday 10-11 am

I have a book shelf which I need to cover with sliding doors running from the carpet floor. White gloss wooden cover and rail on top and bottom, fixed to carpet floor required. handle to slide right and left. Supply of goods and labour required. Dimensions: 112 cm height and 185 cm width.

It’s 3 x cupboards need hanging on a partition wall. Cupboards are h60 x w60 x d40cm. May need some plaster removed an studs added. - Due date: Flexible

The closet now consists of doors covering a whole on the wall. I need someone to build shelves and drawers inside. - Due date: Flexible

Revising Budget Hi I am looking for a carpenter/cabinet builder to build alcove cupboards for me: dimensions are for Left: 3 ft x 3.5 ft x 36 inch depth Right: 3.5ft x 3.5ft x 36 inch depth Height overall 2.5M The measures are approx. All material to be included, and with skirting, plinth, moulding and a simple brass handle. The work needs to be similar to the photo attached. The quote needs to include materials

Table is teak wood. Solid. 10ft long. Very very heavy. Must be cut short and legs connection redone. Also looking at lightening the solid wood chairs. The table top is made of three boards, each one is solid wood, approximately 3in thick. The boards are held together by what looks like butterfly keys, which have been inserted in the lower side. Same with lower panel which is much thinner as per the pictures.

Timber frame wall x 3mtr width. Insulated in middle and each side of wall plasterboarded. One doorframe and door installed.