Find a professional local carpenter in East End

We need an experienced carpenter to install 7 doors in our house. All doors, handles, hinges, latches provided.

Hi, my wooden floor is in desperate need of some TLC and repairs! If you are able to source, repair and relay certain floorboards please reach out! I would need the floorboards sanded and sealed once repaired.

We have three 13 foot long (3.96m) scaffold boards in the garden which we would like cut down to 3.5 metres to fit against our living room wall above the radiator. We need to put the tv in the lowest one. We would like someone to fit the brackets onto the wall secured to the studs and then install the scaffold boards. We had a carpenter set to do this who has hurt his back and does not know when he will be fit again. Timing flexible but would be Monday 15th July at earliest.

Fit acoustic panel with wall 5 panels each side all requires is to be cut at the bottom to fit with the skirting board and roof all same size and 5 panels should fit each side

*please get in touch if budget looks unrealistic* We’re looking for someone to install an approx 3-4m pigs ear handrail on our staircase. I will be available to help if it’s a two person job Handrail can be found here - https://www.loveskirting.co.uk/stair-parts-c18/by-product-c109/pigs-ear-handrail-c443/pine-pigs-ear-handrail-4-2-metre-p61

Same as before on needs.

Supply and fit radiator. Dimensions in the photo.

We have a small eaves area of approximately 20msq with old insulation which we want to replace with 75mm-100mm insulation board. We will remove/dispose of the old insulation ourselves. The job is to remove the current layer of chipboard, cut/install insulation boards in the agreed area and install new chipboard (or similar material) on top. No Loft Legs or equivalent are required: the insulation boards should fit underneath the current surface, which will lay directly on the joists. You'll need to have experience of doing this type of job before so as to ensure that ventilation/condensation considerations are factored in, and it will need to be done accurately.

We have an alcove in which we need custom shelves (pine wood or mdf). We need to integrate a wooden chest in there. See the sketch drawing and inspiration picture. - Due date: Flexible

It's a big sliding doors wardrobe with mirrored doors. They are very heavy and I need help finishing it. The friend who was helping me had a family emergency and had to leave. All that is left to do is put a few screws, anchor the doors to the wardrobe and a couple of things more. - Due date: Needs to be done on Friday, 1 September 2023

We are looking for an experienced (evidence will be requested), competent and professional (referees/references will be checked) to assemble a large new garden shed structure (https://altimber.co.uk/shop/garden-shed-28mm-niklas-with-a-side-porch-3mx2-4m-2-4m/). You should have a track record of erecting similar structures. - Due date: Needs to be done on Thursday, 25 May 2023

I am seeking a skilled professional to restore and transform an old water tank enclosure, as shown in the attached picture. The space features a small opening, which was previously a window, that requires proper bricking or insulation before moving forward with the project. The desired outcome is to have the interior of the enclosure seamlessly lined with either plasterboard or plywood, creating a visually appealing and functional space. - Due date: Flexible

Would need help stripping the hallway bannister (and skirting boards and door frames if you can). Would also be looking for you to cut down the width of two IKEA pax doors if this is possible Dates are flexible. - Due date: Before Saturday, 17 December 2022

DATE FLEXIBLE Top 1: 270cm x 68cm (with hobs, oven and sink) We have 3m x 90cm laminate top Top 2: 2m x 68cm We have 3m x 90cm laminate top We are after someone with experience and reviews of similar jobs. Tops will need cutting down and holes cut for hobs and sink for top 1. Top 2 just needs cutting to shape for utility room. No holes needed. We have sealants Ideally can take old tops away too, but if you can cut them down I can take to the tip. Link to our laminate is here: https://www.worktop-express.co.uk/laminate-worktops/woodstone-blanc-laminate-worktop-3000-900-38mm

I have purchased antique drawers and doors in order to put them together in a frame as a wardrobe and then painted. So, I've created a mock up for my approach. I have 4 sets of identical antique drawers.The top 2 drawers will need to be removed as will the base. With the doors on top it finishes just under the ceiling. All simple stuff. I have wood for the frame already (2x2 and 4x2 baked) and for anything else ply. The end result needs to be primed with zinsser and then painted. - Due date: Before Tuesday, 4 October 2022

Large victorian house, many potential jobs for the right guy. 1st job is to fit out a dressing room. We'd like to use real wood for the frame though the doors may be painted mdf. The main wardrobe will span the room with a doorway in the middle that leads to a bathroom. - Due date: Flexible

As attached in the photos, we need a ramp built for wheel chair access. Tools are very important to take off the tiles and use the rubble as a foundation to shape and build the ramp. - Due date: Flexible

Supply and Fit bath panel frame for an acrylic bath panel including end panel. Fit my supplied acrylic bath panel. Mastic where necessary. Then, remove my wall mirrored cabinet and fit my new wall mirrored cabinet. - Due date: Needs to be done on Wednesday, 22 June 2022

I've bought three stripped old pine doors that I would like to replace existing doors with. Would be great if someone experienced could come fit, make good any holes, fit handles etc. - Due date: Flexible

Need someone that has fitted an ikea dishwasher door to a non ikea dishwasher with Behjalplig. Only need someone that has done this exact installation before as it is tricky - Due date: Flexible