Find a professional local carpenter in London Camberwell

We have an old wooden dresser with drawers (see photo 1). The original drawer runners were plastic and have broken. The width of the groove in the drawer is 10mm (see photo 4) and the width of the old runner is 8mm (see photo 5). Unfortunately the only new runners available seem to have a width of 15mm (see photo 6). I therefore want the following: Either: (A) cut the groove in the drawers wider (probably 18mm) to fit the new standard runner width, or (B) make new wooden runners to match the old plastic ones that broke. I would prefer option (B). I think it would be a simple job as it’s simply sourcing the small amounts of wood, cutting them to size, and glueing. But I don’t have my tools in London. Also, the runners would need (obviously) to be fixed into the unit so that the drawers were working again, in order to finish the job! This is a fairly simple job but a little tricky to explain, so please feel free to ask any questions. For example, it would be okay to take the old broken plastic runner away and make new wooden runners off site. When I got replacements I found that the new standard gauge is too wide.

Spare sheet of 9mm mdf (8ft) not needed in diy project. To be collected from ground floor flat

Hi I have a home shed to be built at home. I need some someone that has experience of building these sheds, ideally the exact model or manufacturer: https://www.mgmtimber.co.uk/beckwood-6x3-pent-shed-no-windows there are manufacturing instructions too

Small section of board is just a cloth. Requirement to replace this with wood so that it is sealed.

One of the side panels (170x45) of my wardrobe has been bent out of shape and is warped significantly. I'm looking for someone with their own work space who can collect the panel and return it once the panel has been straightened as I do not have the space/tools here; ideally would help with re-assembly as well.

Hi there, I am looking for a carpenter that is able to: 1) Build a cupboard around the boiler 2) Then in the space to the right insert shelves to hold cups, mugs, plants etc. Would like both to be made with MDF wood, and painted white so that it fits in with the rest of the kitcheware. Have attached a picture with all the measurements, I live on Denmark Hill and can provide a parking space. Many thanks! Jonah

I need a carpenter to prepare and install five wooden shelves in a cupboard and paint in white gloss. Materials not included.

Job for a handyman/carpenter to source and cut plywood panels to attach to walls. Total dimensions approx: 1.2m x 4.5m - Due date: Flexible

Hello, In my semi-educated opinion the doors are beyond repair and need to be replaced. (Alternative professional suggestions would be welcome though.) The frames/jambs seem to be OK. No special requirements. Plain plywood doors would do just fine. The painting job can be included or excluded - up to you. Please give me an idea regarding the cost. Thank you, David

Build garden shed 6x4 size - Due date: Flexible

I have 1 office and 3 wardrobes that need recarpeting. The office will need underlay, but I don't know if the wardrobes need it - would be great to get your advice. I am considering fitting a threshold in the wadrobe doorways - again it would be great to get your advice. Measurements below. Quite a small job: Wardrobe 1: 97cm deep x 125cm wide Wardrobe 2: 95cm deep x 69cm wide Wardrobe 3: 95cm deep x 118cm wide Office: 234cm deep by 204cm wide - Due date: Before Saturday, 14 October 2023

I need my big glass table top cut so it is a smeller size . Would still want a believed edge finish - Due date: Flexible

I would like two shelves placed in my kitchen cupboard and two in my bedroom cupboard. - Due date: Flexible

We have a very dilapidated Garden Shed which we would like to get removed and replaced. Mid Terrace house with no rear access. Rough idea of costs for supply and work

I need underfloor insulation installed but can't lift all of the floorboards. I need to know if this is doable without ruining the floorboards so need someone to come out and inspect for me. There are 3 rooms with suspended floors, shown in the pics are the lounge and hall. There are built in wardrobes in the bedroom and lounge which would need to be dismantled to gain access to the floor in those rooms so I'm hoping someone can get in through the hall floorboards and access the other two rooms that way. It's an 1890 property so I'm not sure if that's feasible but I understand they were all built with communication channels - Due date: Flexible

There’s 4 doors that need to be installed, with handles, and one door with a lock. The measurements are: Bedroom 1: Width 77cm, Height 202cm Bedroom 2: Width 77cm, Height 198cm Bedroom 3: Width 77cm, Height 198cm Living room: Width 77cm, Height 198cm The measurements of the doors are as close to the doorframe measurement as possible but may need a bit of trimming to fit perfectly. - Due date: Before Sunday, 11 December 2022

Corner sating bench similar to the ones in the photo. - Due date: Flexible

Need one section of skirting board replaced under a radiator. Skirting is higher than radiator pipes so would need to build a box or similar, as in last photo. Also have architrave work which needs doing, to be discussed. - Due date: Flexible

Repair sofa wooden frame which has split. I need an expert. - Due date: Flexible

Build a Forest Wooden 6 x 3ft Overlap Pent Shed and lay the plastic base - Due date: Flexible