Find a professional local carpenter in Lambeth

Basically need the top strip to be 1m wide and then the patterned panel below to be cut in the same place. When measuring I worked out approx the over hang of the top panel is 2cms and then the width of the side panel when attached is 1.5cms meaning that the patterned panel should be 96.5 cms wide so approx 14.5cms needs to be cut off from the right side and then the thin top panel to be 100 cms wide will need approx 20 cms from the right side cut off (so when the front panel and top panel are joined together with the side panel the top panel should be 100cms wide and both pieces should end together on the right if that makes sense - done a diagram in case that’s helpful). They’re 3 separate pieces (obvs only the 2 panels need cutting) but will leave the third piece out too (the side panel) in case you want to put together to see its all aligned 😊

Hi, I’m looking for someone with experience restoring or treating LIGHT - MEDIUM coloured wood floor stains to help with a small area in my living room. My dog had a few pee accidents, and I initially tried to clean the area with Fairy liquid, but now the affected spots look whitish/lighter than the surrounding wood, so I’d really like someone who actually knows what they’re doing with wooden floors. What I need: Someone experienced with wood floor cleaning / stain treatment / floor restoration Ideally someone who has dealt with: pet urine stains on wood floors surface whitening / cloudy patches product damage / finish damage You should know what products or treatment are appropriate and bring what’s needed if possible Area: Very small section of the living room This is not a full-room job Should be a relatively quick task for the right person, but I’d prefer someone who can assess it properly first Important: Please only apply if you have done this kind of repair/treatment before and can tell me: how you’d fix it roughly how long it would take Thanks!

Hello, Number of rooms: ground floor hallway, 1st staircase, 1st floor hallway (including mini staircase) , office, kitchen, living room, 2nd staircase, small landing, 3rd staircase, 2nd floor hallway, 3 x bedroom: - remove old carpet and plywood on ground floor hallway, first staircase first floor (second floor/remaining staircase is done) - old floorboards screw in/fix as required - ⁠fix staircase including replacing any treads required (30 stairs in total over all staircases) - ⁠install new spindles, use existing bannister (about 32 spindles) - ⁠sand and varnish the staircase so that it is ready for a runner Is this a job you would be able to do?

9am - 2:45pm preferred, but can extend work day as required. Fit shelves in cupboard, wood provided. Fit shelves in additional cupboard, wood provided. Fit shelving about kitchen cabinet, wood provided. Fit toilet seat. Hang small holder tray in WC Remove old painter tape from multiple windows. Tighten legs on kitchen table. Paint kitchen table, paint on site. Additional 1 or 2 tasks may arise.

I have an existing built-in unit; I want it converted to a fully mirrored wardrobe by replacing door fronts (or applying mirror panels). Can you do survey + supply + fitting? Saturday would be ideal for survey and measurements, price just for this for now.

There’s an oil stain on a carpet with natural fibres that needs steaming and cleaning

hi this is the first batch of images of the functioning wooden doors that cover the windows, the next set of images will be the one that will need a hinge, as you can see in the first batch of pictures they added new hinges as the old ones had rusted and deteriorated That’s the first 5 pictures, Now this is the second batch of photos as mentioned previously, this is the one i would like a similar thing done were the hinges are replaced as it rusted and the doors no longer intact, This is the second 5 photos.

3 cabinets with door 1.2x60width x80 height x60 depth cabinets 2.1×30widthx80heightx60depth cabinet 3.Walnut top cutting and laying

Looking for someone who can make a low long table with storage underneath and have cupboards. Ideally I want wheels. So it is easy to move . I will attach photos

One wall got stained with pink wine. Need this one wall painted in white

Carpenter needed to fix wooden panel back onto this console and cut a hole for the media outlet. Should be a quick and simple job, likely will need an electric stapler. Pictures below + what I was trying to do before

Hi there, I have a built in dishwasher, and the panel fell off. I've ordered a new panel and need someone to attach it (with screws).

Looking for someone to cut my radiator cover (all wood) on two corners to make it fit

Two pieces of 18mm thick Plywood or MDF cut to 350mm wide and 700mm tall

Wooden beam on the left side of our bed that supports the slats for our bed has snapped and so there is no longer anything supporting that side. It was screwed into the bed frame so we essentially need that wooden beam (around 185cm in length) to be replaced and screwed into the bed frame.

Carpenter need to make a door frame for a built in wall unit. You are required to have all the necessary tools to complete the work. You will be provided with the materials to complete your work . The measurement for the door frame are 530 mm height Width 900 610 height Width 900 Any further questions will be answered - Due date: Flexible

Xxxxxxxxcccccccccccccccccccc - Due date: Flexible

Fit fridge freezer into cabinet and fit plinth. The plinth needs to be cut to fit ventilation grill. - Due date: Needs to be done on Saturday, 1 July 2023

Build two (2) shelves inside a cabinet, next to a gas meter. I have plywood and wood to make a shelf - Due date: Flexible

The worktop of the wooden table was damaged by putting a hot pot on it. The damaged area has roughly length of 20cm. The surface of the worktop has texture which cannot be polished off. - Due date: Flexible