Find a professional local carpenter in London

Just had a Wren kitchen fitted and have some spare worktop/cupboard surfaces left over. Looking for someone to make a small kitchen table from one of the remaining pieces.

I have ordered a made-to-measure built-in wardrobe, that has already been constructed in the room it is to go in to (see Picture 4). I need an experienced carpenter / joiner to finish the job by doing the following: 1. Cut out the skirting boards behind the wardrobe, to get a tigher fit to the wall (leaving the skirting board underneath the desk) - Picture 1. 2. Cut out a hole in the back of the left-side unit, to provide access to the plug in the wall. 3. Fix the wardrobe units to the wall 4. Add fitting (provided - picture 3) around the edge of the wardrobe, for a clean, fitted finish. 5. Fit the bridging unit between the two wardrobe units at the top, fixing it to the wall and to the wardrobes - picture 1. Note: the bridging unit is heavy, so this is likely to be a two person job. I am happy to help with the lifting / holding. 6. Add the doors to the bridging unit. 7. Generally ensure a clean and tidy finish. Tools required: circular saw, sander Instructions are provided with the wardrobe, although were of limited use in building the wardrobe, so some improvisation may be needed.

Handyman - Sealant in Kitchen and Bathroom (Material to be brought by the handyman) Joinery - Screw / Fix Mirror in Hallway, Join Book Shelf into Wall Electricals - Bathroom Cabinet Wiring Light, Living Room electric point extension

Sealant around the induction in the kitchen and in the bathroom on the bath board, fixing electric points for the bathroom cabinet. Fixing a book shelf into the cupboard wall Material for the sealant to be brought by the handyman

There are gaps in wooden tiles and below the balcony doors. Need a joiner/ handyman who knows how to fill the gaps. I will pay for the materials.

I’ve already assembled 3 IKEA wardrobes and now need a skilled carpenter or experienced handyman to help secure them all to the wall and create a custom inbuilt/fitted look for one of them. The goal is to make the wardrobes look seamlessly integrated with the room, like a built-in unit. Tasks include: -Securing the wardrobes to the wall safely and professionally -Removing skirting boards where necessary so the wardrobes can sit flush -Adding trim, filler panels, or moldings (if needed) to close any gaps between the wardrobes and the walls/ceiling Ensuring a clean, polished finish that gives the appearance of a custom built-in wardrobe You’ll need: -Experience with IKEA wardrobes (e.g. PAX system) and custom built-in installations. -Your own tools for cutting skirting boards and panels -A good eye for detail and finish -Ability to advise on trim options or any small material additions if required.

Need a really make shift garage door that can be disposed of in a few weeks but needs. To be able to open close and have a padlock on

Joiner or carpenter to shorten the unit. Need shortening ideally one door/ block comes off. let me know if any questions

I have 3 wooden doors that need repairing, they are in a pretty bad state but I would like to be able to patch them up and repair them adding handles (I think I can supply). The reason I’m not changing the doors entirely it’s because the flat is not mine but would like the doors to be functional and safe again. Not sure if the wood can be filled and repaired and new handles placed back in position or different position on door if need be. Please let me know

Bench area needs tiling. BBQ area needs sliding doors.

I would like to build a feature wall in my living room. Id like the bottom to be cabinets and the top to have an arch design, with shelving inside and LED lighting. Attached are some inspiration ideas.

Joiner / kitchen fitter to join kitchen worktop together One simple end to end butt joint only No cutting required

Looking for a carpenter or joiner to supply and fit a custom MDF panel to fill the gap between kitchen wall units and the ceiling. The kitchen includes corner cabinets and a slightly uneven ceiling, so precise cutting and fitting will be important. The goal is a clean, contemporary finish — ideally spray-painted white in matt, with light caulking where needed to smooth the edges. Experience in kitchen cabinet finishing or similar bespoke joinery work preferred.

I wanted to see if a joiner could make some bespoke wardrobes in my master bedroom. Ive shown the rough size ideas in sketchup with some images of design intent and colour palettes etc. Ive also shown some ideas from Ikea Pax and would like some ideas how these could be adapted into a fitted wardrobes and then fitted in and painted etc. Suggestions welcome as well

In short, had an extension done recently but the builders left a job unfinished. There’s a slight raise going from the original part of the house to new bathroom. Looking for someone to make it look a bit more seamless.

Built in wardrobe from floor to ceiling , I want to move the wardrobe to another part of the room.

I have joint in cabinetry, but would like to install grommets for wires: https://www.amazon.co.uk/Grommet-Grommets-Tidies-Desktop-Organizer/dp/B0DRFMY3WX/ref=asc_df_B0DRFMY3WX?mcid=f680b28c6e0439289c5e877e64941239&tag=googshopuk-21&linkCode=df0&hvadid=725810329396&hvpos=&hvnetw=g&hvrand=6948099056472555000&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9045998&hvtargid=pla-2393514816627&psc=1&gad_source=1

I need a carpenter/joiner to remove the existing lock and install the new one - please see images and two handles. I will provide the hardware. Will need some timber to fill the existing hole and notch the door.

Howdens kitchen being fitted so looking for joinery supply for a single vent cabinet. Fitters lined up so Supply only. IMPORTANT - must match elmbridge porcelain shaker cabinets in colour and look. 3 panels needed - 1m by 50cm 2 x 50cm by 30cm

Carpenter needed to make the ikea wardrobe like fitted inbuilts with base and plyboard on the sides. Also to trim the width of the 50cm wardrobe to fit in the remaining gap. The wall is about 340cm. you can visit the house to check.