Hire a reliable appliance service in Walworth

Washing machine leaking from the bottom of the machine. All pipes are connected securely. Fridge not working after a short circuit. Have tried resetting fuse box but no luck

I need some electrical cables tidying up and sorting out in order to get my insurance company to come and fix my diverter valve. I have a hot water tank and my hot water is only working when the heating is on. The task is only to fix the electrical cables seen in the photograph.

The washing machine is blocked and doesn't work and keeps flashing.

The washing machine drum has come loose, potentially a bearing needs replacing. It is an Electrolux Time Manager.

We have an AEG Dual Sense Technology Protex Washer Dryer (AEG L76684NWD) and we've had problems with stopping midway thorough a wash and dry cycle. We had a similar problem about 1 year ago which was fixed and we told to do regular wash cycles and keep filter clean. This has been done more recently clothes were finishing the wash cycle with a bad smell. We ran some wash cycles with bleach and this seemed to have alleviated the smell after wash only cycles. However the drying cycles were not working, they would start and then stop. The 60 min wash and dry cycle works but the bad smell returned after this cycle. We are wondering if something is stuck in the air passage way that enables the drying process.

Electrics have gone on electric oven. Brand is Lamona. It may just be a fuse issue, so looking for someone to identify what the issue is and potentially carry out any small work to fix.

I need the plug behind the washine machine replaced (washing machine doesnt work in the current socket). Dishwaser has an error code which says its a water inlet error. Need someone to do both

I have a Bosch washer and dryer but the dryer doesn’t work the clothes are left completely wet - Due date: Flexible

Washing machine has stopped spinning and filter plug is jammed (won’t come out). Oil was also found underneath. - Due date: Before Friday, 24 November 2023

We have a new washing machine that needs to be leveled and installed because it is shaking too much. The board underneath is too small and needs to be replaced probably - Due date: Flexible

My tenant reported a broken seal on the washing machine. A replacement seal arrived Friday. He needs someone to fit it. I'm looking for someone to run a basic maintenance check at the same time. The tenant has not confirmed when the filter was last emptied for example. The filter is bottom right plug of the drum, of course you need a bucket or takeout container for this! Here is the manual https://www.ikea.com/gb/en/manuals/renlig-integrated-washing-machine__AA-1609380-2.pdf Here is the spare part that has arrived on site Friday https://www.ransomspares.co.uk/parts/brands/ikea/washing-machines/renlig%2090312709%20(91452814300)/door-seal/231613.htm The issue was reported as the door leaking water. The tenant was asked to use the laundrette in the meantime. When I asked for photos you see a large crack in the rubber seal. The maintenance check is to be certain there are not further issues and the seal replacement has resolved water escape. The maintenance check should include a clean up when the new seal is fitted i.e no residue water log in from the tear. The tenant works night shifts, even on prior agreement they do not open the door in the morning. Any site visits need to be after midday. You will be in a whatsapp group with me as landlord and the tenant as access to help communications to run smooth. The tenant is Spanish speaking, I am English speaking. I lived on site myself before this tenant, it's my home. I fitted a new pump 2018 myself so I am pretty familar with the machine and available on whatsapp video call for any diagnostic support of help you might need like where is the X on the machine, it's likely I know the answer! - Due date: Flexible

Changed lock in Siemmens iq300 washing machine. Washing machine turns on, door locks, washing machine recognises door is lock but fuse box trips when cycle starts - Due date: Flexible

Fit a new cooker hood, remove existing cooker hood and dispose of it. Connect the new cooker hood and check it works . 60 cm cooker hood standard / chimney - Due date: Needs to be done on Monday, 2 October 2023

Remove wooden backing, Install a dishwasher where drawers used to be. (I already have the dishwasher) - Due date: Flexible

Need to install a fire alarm system that can control a 240v gas valve. Must be able to issue certificate - Due date: Flexible

Installation of electric cooker and washer dryer - Due date: Needs to be done on Saturday 14th January

Electric oven will not get hot - Due date: Flexible

I need an NVME installed to replace my current one and have windows installed on that, along with an RGB lighting kit installed. Also got a few other small things that I'd like done too which I'll provide info about through messages. - Due date: Needs to be done on Sunday, 13 November 2022

I need the spare room decorated (fresh lick of paint, I will buy the material). Also, the new washing machine in my kitchen shakes terribly so I need to pin it down to the floor and/or box it into the wall or something. I can show a video of how it shakes so to give an idea. I am setting up a general budget of £100 but definitely open to discussion. - Due date: Before Monday, 31 October 2022

Renter report a broken Ikea SMAKRIK. It sounds like the pump has gone and the spring load for the water pipe to pump has also gone. Manual https://manualzz.com/doc/50300230/ikea-bem-500s-instruction-for-use Spare parts https://haushalt-hobby.de/geraet/ikea-bem-500-s-40113043-852200501771-3970944378 I need a visit SE15 at Burgess Park (OKR side) to assess if I'm right, would order parts myself and then need return visit to fix when the parts arrive. ✌️❤️ - Due date: Flexible