Find an experienced plumber in Brighton VIC

Need to locate leak and seal up so water no longer dripping under sink.

Help me modify the water pipe under the kitchen sink. Move it from the side to Center

The toilet keeps running after flushing. Cistern needs repair or replacing.

We have a tap on the roof of our terrace that will not turn off need a plumber to come and switch the tap off because it’s running.

Need plumber to help under kitchen sink to install a water filter unit (Waterdrop X8). Will need to loosen old brass fitting, install the filter t-adapter. Also need the installer to drill a 25 mm hole in the stainless steel sink for the filter tap. Sink is stainless and accessible. All parts supplied, just need someone who knows compression fittings and has a step-bit for stainless steel.

Toilet flush has stopped working. Plumber came round, dismantled it and has not returned to finish the job

I got 2 smart toilets installed which i purchased from Alibaba. They are amazing but the flush is not good. Not sure if it is the water pressure that is causing the problem or the way the waste is connected. I need someone to look at them and troubleshoot and fix it. They are P trap toilets and they don't have a water tank in them. Normally they have an S trap and they have a mini water tank in them in China. They are both connected on the same line through an RPZ valve under the sink in the vanity as shown in the picture. There is also an RPZ at the property boundry.

Hi there, Our hot water system needs replacing. The job is just for install. Size is 25L. Located in Brighton off church Street.

fix bend in wind barrier base

Ice machine not pumping out water seems to be trying but no water coming out. Hose may be blocked. Need service

I have a water filter that has come off my tap and I can't manage to put it back on.

Fix leaking tap please. On & off leak

A Toilet seat replacement with lid is required to be supplied and fitted

Hi, I need help connecting an outdoor shower head to a garden tap. The setup should use a standard hose with a quick-release system for easy attachment/detachment. I’d like the solution to be both practical and neat, ideally with the hose positioned discreetly so it doesn’t stand out too much (preferably behind the wooden fence shown in photo). I have the Shower head (see photos), and standard hose which can be connected to water tap located approx 1.5mts from desired shower connection. What you may need to supply: - Suitable brass/copper connectors for the tap and shower head - Quick-release fittings - Any additional connectors or parts to create a shorter, tidier hose length. Looking for someone who can put together a functional, and aesthetically pleasing installation. Tnx

Looking for renovate the commercial kitchen plus and install some appliances like fryers , grill etc

My shower and vanity are plumbed backwards i.e. turn to 'hot' and get cold water and vice-versa. I have identified the cause and accessed the pipes from the wall behind the shower and also checked the hot and cold routing as per photos but want a licensed plumber to carry out the work. In the main photo, the lower T Pieces feed off to the right for vanity and continue upwards for shower. Left pipe is hot and right pipe is cold. My thought is it simply needs cutting below the T pieces and connecting left pipe to the right T piece and also right pipe to the left T piece. This would solve both shower and vanity issues. Hopefully it is just a couple of connectors, maybe new T-pieces and some small amount of 16mm pipe. In and out. I don't need you to re-plaster, just re-route the pipes and issue a certificate or appropriate guarantee of works. The pipes and fitting are Auspex 16mm so I would prefer to use Auspex and a licensed plumber. If you aren't a licensed plumber, please don't bother responding as I could do it myself if I wanted to and risk water damage later on.

Remove and replace 2 x toilet seats. I have purchased the product.

Change over old broken kitchen tap to new one

Just need help connecting the dishwasher inlet hose to the correct tap under the sink. I’ve attached photos for reference everything is already in place, just need someone who knows what they’re doing to hook it up securely. No tools here, so bring your own wrench etc. Should be a quick job for someone handy!

2 leaking taps one on kitchen sink, one outside on terrasse