Hire a reliable appliance service in Central London

recently had a gas hob fitted into my flat, but the connection was not done very well and there is a small leak. About 2-3 feet of the gas feed pipe needs to be replaced and then the gas connection to the actual hob refitted. I have a short video to show what needs to be done, and if you are interested in quoting for the job.

Choose the mode of washing ( eco) and then close the Zanussi dishwasher door, this time I didn’t hear a click and the dishwasher didn’t start washing with water coming down as usual. Instead The door didn’t lock , I can still open it, and nothing no water coming down, nothing happened at all.

Replace an existing fully integrated Bosch dishwasher with a new Miele 7085 (tall XXL height model). https://www.miele.co.uk/product/12865050/fully-integrated-dishwasher-xxl-g-7085-scvi-xxl-autodos-stainless-steel The job: 1. Remove the old machine (I'll dispose of it myself) 2. Fit and plumb in the new one, water, waste and power all in place 3. Carefully refit the existing kitchen cabinet door The new machine has been measured to fit and the plinth clearance is already cut, so should be a straightforward like-for-like swap with everything ready to go.

Kitchen fitting Carpentry

Diagnose and quote / repair breville barista express pro - Australian machine but same as Sage. Machine not pouring shot/ hot water / steam after 2 seconds ? Flow sensor issue

I have an 20 year old AEG Hot Plate hob, which is pretty much awful and I am thinking of replacing it. However all the dimensions of new ones seem to be 1cm more. I just wondered if this is something that can be done? No rush just wondering before I order a new hob. Pics include existing dimensions vs new ones, and image of setup. The Hob has its own Power Switch/Circuit etc

The panels of my Lelit Anita are misaligned. While attaching and removing the portafilter, there's a slight flex in the machine. I believe the rivet nuts are loose within the machine and need tightening.

our coffee machine is two + years old and need servicing

The door on our Hotpoint WTF 722 washing machine is jammed and won't open. We need someone to attend today urgently and safely open the door without damaging the machine. Please include your availability and price.

Fuse box switch caused a minor power cut in my flat. I flipped the switch back on and everything works fine, except my electric oven. The stove works and the oven comes on but its not heating up at all. I tried to reset the timer like what I read online but no changes Brand: Montpellier Model: MDOC60FS

I need my new cooker hood installed in the kitchen

Please keep all communication through the app messenger, thanks. I need an electrician to repair the cooker and to fix a Single Bed with Headboard & Storage Drawers. Electric cooker-https://www.very.co.uk/swan-sx16710b-50cm-electric-solid-plate-cooker-black/1601210766.prd?variantId=WQG1P&cm_mmc=google-_-BAU+-+Generic-_-All-_-PRODUCT_GROUP_2358978390467_[*AdID*]&utm_campaign=Generic_Electricals+-+Shopping+-+Appliances+-+MDA&utm_medium=cpc&utm_source=google&utm_term=PRODUCT_GROUP&campaigntype=generic&category=Electricals&gclsrc=aw.ds&gad_source=1&gad_campaignid=21519324959&gbraid=0AAAAAD2k1i2neBBQSq5iKYn4X6im_zhXU

Stanley [ST-30P-E] Pedestal Fan requires repair - it is stuck on one speed. Please note the job is for an electrician or a fan repair expert, as parts for this may not be readily available. Terms: Fix or no fees, or just a reasonable call out charge. Parkhill Road, Belsize Park, NW3 2YH. Thanks!

Fishy smell from oven. Someone from Domex has come round to look at the oven. He said the oven works completely fine. He said he did note the fishy smell and said it could point to an issue with the main electrics but not the oven itself. He recommended for an electrician to come round and take a look at the electrics properly to make sure there isn’t a potentially dangerous fault.

Dishwasher is not draining propoerly, and control panel is glitchy. Sometimes it lets you choose a setting and runs normally, but most of the time it rejects and glitches when you choose a mode, and so it’s hard to get started

Hi, I need someone to remove a broken integrated washing machine and prepare the space for a replacement freestanding washing machine. The existing machine is an integrated Candy washing machine fitted under the kitchen worktop. Appliance installers have advised that they cannot remove the integrated unit themselves and have asked me to arrange this before they can install the new machine. The job would include: • Disconnecting and removing the existing integrated washing machine. • Checking the clearance under the worktop and removing or adjusting any trim, panel, bracket, or fitting above the machine if required to allow a standard freestanding washing machine to fit. • Taking away and disposing of the old machine. • Leaving the water, waste, and electrical connections ready for the new appliance installer. I can provide photos of the current setup below. Please let me know if this is something you can do and provide a quote if possible. Thank you.

We need to replace the rear wheel break side of the yoyo babyzen stroller, we've taken the old wheel off but can't attach the new wheel

My Hotpoint washing machine has f05 showing and it’s not draining. I need it fixed today is possible, please.

Electrician to install new Electric Cooker

Looking for a plumber to install a proper cold water feed valve for a washing machine. There is an existing cold water pipe in place, but it does not currently have a standard threaded outlet suitable for a washing machine hose. The job is to fit a suitable isolation valve with a 3/4" threaded connection. The waste pipe is already in place. Access is straightforward (see photo).