Find an experienced plumber in Melbourne

Looking for a plumber (preferred) or experienced handyman to supply and replace an old kitchen mixer tap. The existing tap has a constant drip and appears to have reached the end of its serviceable life. Rather than repairing it, I would like it replaced with a new chrome mixer tap of similar style. Scope of Works: * Supply a quality chrome kitchen mixer tap (or quote separately if preferred). * Remove and dispose of the existing tap. * Install the new tap. * Test for leaks and ensure everything is operating correctly. * Leave the work area clean and tidy. Please include in your offer: * Total price (labour only and labour + supplied tap). * Brand/model of tap you propose to install.

Looking for a licensed plumber to inspect and repair a shower mixer tap. The shower temperature is difficult to regulate and seems to jump from very cold to very hot, with little ability to achieve a comfortable temperature in between. The mixer is only 2 months old. Apartment located in Port Melbourne.

Looking for a licensed plumber to remove my existing kitchen mixer tap and install a new one I’ve already purchased. New tap is in box with all fittings and hoses included. It should be a straightforward changeover — the new mixer is a similar style to the old one, existing tap hole and under. Easy access under the sink. The job: - Remove existing kitchen mixer tap - Install new mixer tap (supplied) - Check connections and confirm no leaks / good water pressure Requirements: - Must be a licensed plumber - Please provide a tax invoice - Bring standard tools

I have a leaking mixer tap in the kitchen. Will purchase replacement - just need it swapped over.

Replace existing laundry tap with a new one

Standard kitchen mixer tap replacement in Southbank. Unit supplied, weekday swap

Mixer leak from below bench level when I use the hot water. Not sure what part of the mixer is leaking. Not sure if I need to buy a new mixer or not.

- Need a leaking mixer tap repaired - I believe it may be the cartridge - if I’m able to be given a guide of which cartridge is needed, I can pick it up so it’s ready to be installed Thank you

Rod connecting mixer tap to sink needs to be adjusted so that swivel handle turns to correct side for hot or cold water. I have removed the steel plate, rubber and bolt connecting tap to sink. Rubber most likely needs replacing.

Replace shower head and basin tap (new parts supplied). Like-for-like replacement. Easy access. No plumbing relocation. Also need to replace washer/tighten shower mixer tap, as there is a minor leak.

Broken bathroom mixer tap-needs replacing. I’ve purchased a new mixer tap that fits the space. See photos 1 & 2. Note - Tight working space underneath for connection - see photos 3 & 4 taken from vanity underneath the sink. If you foresee a difficulty with that please don’t respond. It’s beyond my limited handyman skills but my hope is it’s a pretty straightforward swap: Turn off water, Disconnect broken mixer tap, Connect the new mixer tap, Turn water back on. Prefer a late morning or afternoon before Easter but not critical. $100

The Kitchen sink mixer tap is broken and the task is to replace the tap. New sinker mixer tap will be provided and will just require fixing in the kitchen. Require a registered or licensed plumber for the task

Replace existing mixer tap with new one just purchased Kitchen sink

change the kitchen mixer tap to a new one, already purchased the new one from bunnings.

My mixture tap was leaking, so I tried to replace the cartridge myself, but the cartridge was not removable, so I decided to replace it with a new tap. The supply pipe is thin, so I had to replace the connection, but I couldn't do it myself, so I decided to ask a plumber to do it for me. I have already purchased a new mixture tap.

O-ring worned out. I would like to replace with a new kitchen tap. Photos of actual and replacement

Swap out old bathroom mixer tap with new one. I have already bought new tap. Just need licensed plumber to install.

Need someone to fix the leaking mixer tap of the bath

Remove and install kitchen mixer tap. Register plumber and provide invoice thanks.

The mixer tap spins but no water comes out. It started to over spin before it finally broke.

My shower (10+ years old) is leaking from one bottom corner during use. The leak appears to be coming from where the shower screen frame meets the floor/wall. There is mould in the shower corners and the existing silicone is old. There are no signs of water damage outside the bathroom or below. I’m looking for someone to: * Inspect the source of the leak. * Recommend the appropriate repair. * Clean/remove the mould in the affected area. * Repair the leak and reseal if required. * Help prevent the issue from recurring. * Test the repair before finishing. Please include: * Your experience with shower leak repairs. * Whether materials are included. * Your quote. Photos attached.

Leaking shower and leaking kitchen tap. Need a licensed plumber

Shower has a slight drip and i believe needs new washers. We are getting the bathroom renovated end of year so just need leak fixed.

Has a standard shower head with leaking connection. Need to switch out for a rail shower so possibly needs elbow to connect rail set up . Will supply rail and elbow if required

Previous trades have left a large gap between the floor and the bottom of the shower screen, leading to water gushing out. Can this be repaired?

Fix a leaking shower cage and seal some broken tiles

Leaking shower head and very stiff shower taps, suspect washers

I have a shower tap that his leaking water, possibly just a washer change

Looking for a qualified & experienced plumber to fix the problem in my shower causing the drip to continue. Might be a small fix, like replacing the rubber ring inside.

We have a leaking shower tap. Likely requires cleaning the seating and replacing the washer/valve inside.

Leaking shower head to be fixed

Shower area is leaking to the unit below Stage 1: * Remove grout and silicone in the shower area. * Epoxy grout area and recalk shower. * Flood test shower and test for leaks in unit below. Stage 2: * Repair the ceiling of unit below Please quote Stage 1 and Stage 2 separately

My shower leaks every time I use it

Fix leaking shower (spindle issue) My shower head is slightly dripping continuously even when turned off. I’ve identified that the issue is likely coming from the tap/spindle (handle area), not the shower head itself. The handle has been removed and the spindle is exposed for reference for photos. Looking for someone experienced to: • Inspect the issue • Replace O-ring and/or cartridge/spindle if required • Stop the leak completely I’m happy to cover the cost of any small parts if needed. Prefer someone who has done similar fixes before.

Looking for a qualified and experienced plumber to assess and fix a suspected leak coming from our shower. Issue details: Water appears to be leaking behind the wall (possibly from the shower head or taps) Water is coming through the skirting board on the outside of the shower wall No obvious visible leak inside the shower itself Additional request: Inspect the shower door and advise on / install improved sealing to prevent water escaping the shower (currently some water exits during use)

Replace cistern lid and fix shower head leak.

Shower head is leaking. Need to have the shower spindles reseated and washers replaced. Will require an invoice as well.

My shower handle is leaking and keeps dripping

Hi, I’m looking for someone experienced to seal a leaking tiled shower without removing tiles (using a clear waterproofing membrane or penetrating sealer like Shower Plug). I’ve had this done before so I know it’s possible — just need someone who knows the right product and process. Details: Property is in St Kilda East (Melbourne) Currently rented on Airbnb, so need this done ASAP Shower is tiled and leaking through to ceiling below Looking for a clean, professional job Please only apply if you’ve done this type of repair before and can recommend the right product.

Looking for a qualified/experienced individual to fix the problem in my shower causing the drip to continue. Might be a small fix, like replacing the rubber ring inside.

Two small jobs to be fixed at my apartment in Richmond. The apartment is tenanted so you need to coordinate date & time to attend property. -Pick up (Bunnings Hawthorn) & install new door handle -Re-attach window handle -Re-adjust & tighten toilet seat that is loose Will pay for materials on top of labour costs.

Our Studio toilet and sink is not working and need someone to help us get it back up and running.

Unblock toilet in bathroom

My toilet flush button is not working correctly and I need someone to diagnose and repair the issue. the flush button is not operating as expected. Task includes: Inspecting the flush button and cistern mechanism Diagnosing the fault Repairing or reconnecting any broken components where possible Please bring basic plumbing tools and any common replacement parts suitable for a standard push-button toilet cistern. Photos of the cistern internals are available. Looking for someone with plumbing or toilet repair

Need to repair the toilet cabinet and need to fix the chain back for the blinds (the blinds can’t go up or down cause the chain fell down)

Toilet (only one on premises) sewer blocked - happens every couple of years

Toilet blocked need to be open It’s apartment first floor

The toilet seat is slanted to the side, it’s not sitting straight, it swivel to the side when using. The shower head holder isn’t locked in place, it just slides down try to adjust height

Need toilet seat & toilet cover fixed back ontop of the toilet

Apartment building, upstairs toilet leaking at the tap that supplies the cistern . Please fix. It’s leaking at the wall, onto the floor.

Fix toilet seat hinges , to make them secure as they slip around

The button to flush the toilet doesn't seem to screw on properly? Not sure if im doing something wrong or it needs to be replaced? Pushing the white lever will work.

Hi, I need someone to attend today if possible to inspect and hopefully fix my blocked toilet in North Melbourne. The toilet is clogged and there is also a small amount of water leaking from the base onto the floor.

Toilet blockage x 2 needs uncloging

Hi, I need a plumber to fix a toilet issue at my property. The Problem: • I think the toilet needs a new flush valve installed,not sure Requirements: • Supply and install a new flush valve. • Labour and fuel should be included in the offer. Schedule: • Looking to get this done as soon as possible, need to fix before Wednesday

The toilet is constantly running excess water into the bowl and the water level is going beyond the overflow point. I think that the flush valve might need replacing. Looking for somebody to check the problem, source the part and replace.

My current toilet was recently assessed and it is likely that the outlet valve rubber as well as the rubber at the base are worn out, causing water to leak into the bowl. I've been quoted over $800 for repairs, so I am wondering if a full toilet replacement is best for long-term. I’m looking for a licensed plumber to either provide a second opinion or manage the replacement from start to finish. The Task: • Assessment: Brief look to confirm if a full replacement is the most cost-effective move. • Supply & Fit: Suggest suitable options to choose from and installation • Disposal: Removal and disposal of the old toilet. • Since my partner and I work full-time, we need someone who can independently source the materials and handle the logistics. Requirements: • Please provide an all-inclusive quote (Labor + Materials/Toilet + Disposal). • If you charge a separate call-out fee for the initial look, please state that clearly. • Must be a licensed plumber with your own tools and transport. Location: Melbourne CBD Timing: Flexible, but looking to get this sorted as soon as possible. Available in the mornings before 8am, in the evening after 5:30pm or the weekend.

I am looking for an experienced plumber to attend a property and unclog a blocked toilet. This will require proper equipment. You must have one of the following • Drain snake • Drain auger machine Please do not apply if you do not have the correct equipment. Time requirement The job must be completed tomorrow Tuesday 3rd of February before 1pm. Timing is important. Location 18 Kavanagh St, Southbank Additional notes • Access is straightforward • Looking for someone reliable who can attend on time • Please mention what equipment you will be using when you apply Happy to answer any questions.

Toilet is running water in the cistern and toilet not flushing properly - likely due to inlet valve not working correctly. Need plumber to identify the issue, replace any parts and fix the issue

• Toilet has constant running water into bowl (wasting water + loud). • Now cistern/tank won’t fill properly; valve seems stuck letting water out. • Likely needs flush valve seal/flapper and/or inlet/fill valve replaced + water level adjusted. • Please bring common toilet parts/tools and test on arrival.