Find a professional kitchen renovation contractor in Melbourne

Remove and dispose of the existing kitchen, then assemble and install the new kitchen

Looking for a skilled kitchen installer for a straightforward cabinet install job. Cabinetry and benchtop are being supplied by a cabinet maker — this job is installation only. Rough kitchen design attached for reference (laid out using IKEA's planner tool, but the kitchen itself is not IKEA). Scope of works: - Build a pine plinth for the base cabinets to sit on - Install 7 assembled base cabinet carcasses, including attaching doors - Replace 7 upper cabinet doors (new doors supplied, existing upper cabinets are staying — doors only) - Fix approx. 17 new knobs to cabinet doors and drawers - Install new timber benchtop, including cutout for a top-mount sink - Fit side panels and kicker board to finish the kitchen What's needed: Experience installing kitchen cabinetry and benchtops (non-negotiable — please don't apply without this) Own tools required Must be comfortable with precise cutout work (sink cutout in timber benchtop) Materials: All cabinetry, doors, benchtop, knobs and hardware supplied. Installer needs to bring plinth timber (pine) unless otherwise arranged, and general fixings/tools.

** EDITED with more detailed requirements Looking for an experienced cabinetmaker or joiner to install a fully integrated Ikea kitchen with custom size benchtops. More 3D design files will be available when required. Cabinets: already assembled, they simply need installation. There are no overhead cabinets. Benchtops: need modifying so shall require accurate measurements and cutting as well as cutting the openings for sink and cooktop. See photos for more explanation on the most difficult cuts.... Additiolnally, excess materials to be cut for shelving (also to be installed). All finishes like silicon and edge trimming for cut bench tops to be included in quote. Benchtop joins to be mason mitre joins Island Bench: To be secured to tiled flooring Appliances: RangeHood and dishwasher to be installed (plumber booked) Requirements: Must have proven experience with IKEA installations and bring all necessary tools for onsite benchtop cutting and drilling into tile flooring. Timing: Dates around the 23rd July Please quote

Electrician for kitchen renovation, townhouse in Brunswick East. 3 stories, kitchen on ground floor. New kitchen going in late July to early September, needs approx 5 staged visits: disconnection 27/07, rough-in 04/08, temp fit-off 14/08, disconnect for stone install 31/08, final fit-off 03/09 (dates may shift slightly with the schedule). Scope: 5x new double power points incl one flush-mounted in cabinetry and one designer flush outlet in tiled island, isolator switch, dedicated oven circuit (2.5mm2) and induction cooktop circuit (6mm2), LED strip lighting connection, rangehood connection with switch in cabinet, connect owner-supplied appliances (induction cooktop, oven, integrated rangehood, integrated fridge, dishwasher, microwave), disconnect/reconnect one existing point, switchboard capacity check. Detailed MEP plans available on request. Must be licensed (REC) and provide Certificate of Electrical Safety.

Install a new Kaboodle kitchen in an apartment. Assembly, bench tops, appliances, plumbing, tiles, electrical, add additional floor boards

Looking for an experienced installer to assemble and install ikea kitchen, including benchtop and cabinet door knobs. Design attached.

Hi there, I’m looking for an experienced kitchen installer (ideally with IKEA kitchen experience) to attend a site visit at my home in St Kilda and provide an accurate quote for installation. I already have a completed IKEA kitchen design and item list, and would like someone to review the plan in person, check measurements, and identify any considerations before finalising installation pricing. This task is for the site inspection only, including: - Reviewing the IKEA kitchen plan - Assessing the space and measurements - Identifying any potential installation challenges or requirements - Providing a detailed quote for the full installation (to be awarded separately) Please note: - I am meeting with a small number of installers to compare approach, experience and pricing before proceeding - The installation itself will be posted/assigned as a separate task I’m flexible with timing over the next few days/week, by mutual agreement. Thanks and I look forward to working with you.

Small L shaped IKEA installation. Approx dimensions - 2.4m x 3.7m. See picture for reference.

Need gas fitter to temporarily disconnect gas stove before DIY kitchen renovation.

I’d like a new kitchen designed with high utility and beautiful finishes. Preferably by an architect or experienced designer looking for freelance work. The renovation will include removing a wall to make it open plan with the dining room. I just want plans so I can manage the build myself.

Need someone to see my kitchen in-person and give me a quote for renovating it. Including cabinates ans dishwashers installation

In-scope: - Removal of 1 base cabinet - Removal of existing tap and sink (to be replaced in new kitchen) - Removal of stove top (to be re-used in new kitchen) - Removal of all bench tops - Removal of existing cover panels & filler pieces - Installation/ cutting of new cover panels & filler pieces - Installation of 1 high cabinet - Installation of door knobs - Place dishwasher in correct position - Ensure all case cabinetry is level and ready for stone bench top installation Out of scope: - Installation of door and drawer fronts - Installation of bench tops - Plumbing associated with connection of dishwasher - Painting etc. Can provide additional photos on request.

Remove and install Ikea kitchen cabinets. This is a small galley kitchen approx 3m x 3m. Very basic kitchen.

I am requiring a full kitchen renovation - rip old old kitchen, design new kitchen, install etc. Posting on airtaker to see if I can engage with tradies directly rather than going to a company that will just markup the work enormously to pay middle management.

Looking for an experienced cabinet installer to install a custom pre-assembled kitchen in a ground floor apartment. Scope of works: Install medium L-shaped kitchen cabinets (all cabinets pre-assembled) Install small floating vanity Install a couple of small wall cabinets Ensure cabinets are level, fixed securely to walls and aligned ready for stone benchtops. Also requires 3mm template cut ready for stonemason Details: Location: Melbourne Access: Ground floor apartment (easy access) Cabinets will be on site and ready to install. Requirements: Proven experience installing kitchens/cabinetry only Must have own professional tools (laser level, cabinet clamps etc.) Attention to detail and quality finish Please include photos of previous kitchen installs Only experienced cabinet installers will be considered.

Seeking a licensed electrician to complete final electrical works for a recently renovated kitchen. Scope of Works: 1. Appliance Installation & Connection • Install and connect: • Electric oven • Induction cooktop • Dishwasher • Ensure compliant and dedicated power supply to each appliance. • Install dishwasher power outlet within cabinetry (if not already in place). 2. Powerpoints & General Electrical • Replace existing power point covers with new covers (supplied). • Install new powerpoint on kitchen island wall. • Provide and install any additional wiring or outlets required to complete appliance setup safely and compliantly. 3. Rangehood Installation • Install new rangehood. • Remove and refit/adjust cabinetry as required to accommodate installation. • Create wall penetration for external ducting. • Supply and install ductwork for rangehood exhaust. • Connect ducting to existing bathroom ceiling exhaust (confirm feasibility on site). 4. Switchboard & Compliance • Upgrade or modify switchboard if required to support new appliances (e.g. RCBOs, circuit upgrades). • Ensure all circuits are compliant and appropriately rated.

Small flat pak Bunnings kitchen install in an apartment. Area has been measured onsite by Bunnings staff. Photo is a drawing of the kitchen to be installed, which includes centre island.

Kitchen installed including splash back

Hi all! We need help with a new install a of an ikea kitchen. There are benchtops (laminate) to be cut, if you can find a plummer to help with a sink that would be great. We have an electrician already. There is an old kitchen I will remove and plaster myself.

See the following requirements and matching pictures. Note that all materials are provided (including rangehood), but required tools are not. Kickboard - 1 Cut provided kickboard to size Install using IKEA legs Above Fridge/Pantry panels - 2 Cut and install ~200mm x 40mm side filler panel Cut and install ~80mm X 60mm underside filler panel Cut and install ~2180mm x 90mm top filler panel Rangehood - 3 Install rangehood (recirculating) - requires modification of cabinet to create space and provide support for rangehood. Rangehood cabinets - 4 Secure against wall and each other Install side and under panels Install doors