Find an experienced flooring expert in Melbourne

Remove and take away 40 m² of carpet and underlay in two bedrooms, lounge and small hallway of two bedroom flat on first level.

Need carpet to be removed and a new one installed on the same day

Looking for installation of 128 sqm of hybrid flooring in a two-storey house. Scope of work: Flooring installation only (staircase excluded) Removal of existing flooring: Tiles in the kitchen Carpet in 3 bedrooms Existing laminate flooring in remaining areas Please provide: A quote for installation A separate quote for disposal of removed materials

Looking for a quote to get hybrid flooring installed with a soundproofing layer. The room is around 22sqm (5.5 x4) It has an existing carpet that would need to be removed. Preferably need someone certified as I have to get this approved by my building. I can supply the floor and soundproofing layer.

Remove old flooring Install sisal carpet - View all the details of this offer: https://www.airtasker.com/offers/01KCT5F8KRVBTM0HC6AP4Y3R28

Install commercial vinyl stair tread overlays (high-traffic, water-resistant) I’m looking for an experienced flooring installer to supply and install commercial-grade vinyl stair tread overlays on an existing staircase. The stairs are MDF and were previously carpeted. Requirements / scope: • Supply & install commercial-grade vinyl stair treads • Suitable for high traffic and wet mopping • Non-slip finish required • Install matching vinyl stair nosing • Prepare surface by scraping loose fibres and sealing MDF with bonding primer • Secure with appropriate vinyl/MS polymer adhesive Staircase details: • Straight internal staircase (17 steps) I pay for materials separately

Looking to get new laminate flooring installed in 3 rooms (2 beds, 1 living area) in a Melbourne CBD apartment. Floors are currently bare concrete as previous flooring removed after water damage. Approximate sqm size of flooring needed is 34m2.

Task: Install 20m2 of click-lock engineered timber floating floor, underlay and trims/scotia. Work hours: between 8am and 5pm. Dates available: 7 Jan to 9 Jan Property: First Floor Fitzroy apartment, stairs access only. Parking: Street parking at cost to Tasker. - Remove and dispose of existing flooring, floor trims and underlay - Lay supplied underlay and ensure smooth, even base - Install supplied engineered floating floor - Cut and fit boards neatly around door frames, skirtings, and obstacles - Fit transition trims and scotia mouldings - Clean area and remove all waste and offcuts I will supply all flooring materials and trims.

Install hybrid floor for 17 square meters for the living room. The floor is carpeted, I will remove it myself. As the carpet covers living room and bedroom, so it needs to be cut at the bedroom door.

Hi - We need someone to do the following - 1. Pick up laminate flooring from West Melbourne. 2. Delivery to apartment in Lonsdale St Melbourne. 3. Remove carpet and dispose 4. Prep underfloor if needed - can be an 'extra' on top of the price. 5. Lay 3mm rubber underlay. 6. Lay 12 mm laminate boards in approx 40sqm(2 bedrooms and a living room. needs to be done in late december after Christmas, or early Jan(before 10th).

Lay approximately 20m2 of vinyl flooring in 3 rooms (kitchen, laundry, bath) and hall way as pictured and shown in floor plan. Please include two quotes: 1) supply & install 2) install only (I will purchase flooring) Thanks, Colin

***$10 is just to get quotes*** Needing 49.5m2 hybrid flooring installed Last minute cancellation

Removal of old pulled up carpet (approx 90m2) and underlay- currently in large pieces will need minimum 2 people

Supply and install approx 50sqm of hybrid floating floorboards - 3 rooms and a hallway. Concrete base.

Yellow area to be replaced with hybrid flooring.

About 11 sq metres of carpet to be laid in small room. Good access - existing underlay and hard edge. Room will be clear of furniture.

Rip up carpet in small 2bdr apartment. Install hybrid flooring in both bedrooms and living area space (not bathroom).

Looking for vinyl floating floor boards to be installed in a small kitchen over existing tiling. Approximately 6 square metres. Flooring already provided. Floor is already level. Might need to even out some imperfections.

I need an experienced floating floor board installer to lay boards & quad that we will supply. Appx 32 sqms. We will remove the existing flooring & dispose of it. Job is in Richmond.

Howdy. I need someone experienced to lay a floating floor. Area is 7 x 5.4 metres. I have the the 5.5mm hybrid boards already purchased. The room won't be completely vacant. We thought we could shove all the furniture (that we cant put elsewhere cos it's too big) into one half of the room, lay half the floor then when it's done, move the furniture to the other side of the room and lay the second half. Happy to pay the going rate.

Professional floor polisher required to rid stain （cat pee), the stain must disappear and restored to original colour of floor，

sand and polish our terrace home

Sand and polish the floor boards in three bedrooms, hallway, lounge and kitchen dining. You can see the property and the floorplan online

75 sqm excellent floorboards to be sanded and polished by experienced specialist. Black butt timber less than 10 years old hallway (1 * 12)+ 2 bedrooms (approx 4*4) kitchen/living (6*4) + single stairs + landing (7*1)

Got a Level 1 space in Brunswick East that needs a proper polished concrete makeover. We want the full grind down + high-gloss finish. No shortcuts, no “surface polish.” What we need: • Grind & polish approx. 180sqm • Aim: shiny, reflective, warehouse-style finish • Floor condition: some dents/patches, nothing crazy • Access: Level 1 • Timing: ASAP or before Christmas • Bonus: If the price is right, we may extend to the full 250sqm (quote 180sqm first) What to include in your quote: • Total price for the 180sqm • How long the job will take • Availability to start • Any equipment/access requirements • Experience/photos of past polished concrete jobs Photos attached in the listing. Looking to lock someone in fast — need this done properly and professionally.

Hi all, Keen to get a quote pls for sanding + polishing 80 sqm of pine floorboards across 4 rooms + 1 hallway. Floors are in reasonably good period condition (Victorian weatherboard) but have an orange tint to them. Would like them finished to a clear matt finish. Pls see images of current floors (1st photo) and what I'd like them to look like (2nd photo) Thank you!

Sand and polish floorboards. One bed ground floor apartment. I have a gap in air bnb and would like to have the job done Sunday and Monday. It’s a small place with lounge/kitchen area and 1 bedroom with boards. Bedroom boards are in good condition some patches in lounge and kitchen are more worn

Fix cigarette burns on floor boards

3 burn on the floor that needs to be fixed

Hi all, Keen to get a quote pls for sanding + polishing 80 sqm of pine floorboards across 4 rooms + 1 hallway. Floors are in reasonably good period condition (Victorian weatherboard) but have an orange tint to them. Would like them finished to a clear matt finish. Pls see images of current floors (1st photo) and what I'd like them to look like (2nd photo) Thank you!

Need floor boards polished

I need someone to lightly sand and repolish 3 boards under the sink. They are not damaged just lost polish. 3 metres in total

Require 38 sqm grind and polish clear

Keen to have my floorboards vacuumed, mopped, and polished, and in particular — need help with some strong carpet tape residue left on the timber. We’ve removed most of the actual tape, but there’s still a fair bit of stubborn sticky residue left that’s proving tricky to remove. Looking for someone with experience in floor cleaning and gentle adhesive removal who can get the boards looking clean again without damaging the varnish or timber. Ideally you’ll bring your own supplies (e.g. mop, polish, adhesive remover, scraper, cloths, etc.). I have a vacuum for use. The job covers around 50m² of floorboards across the dining, lounge, hallway, kitchen and entrance areas. 📷 photos of the rug tape residue

Existing garage floor is smooth and intact. No repairs necessary. The epoxy coating is peeling and needs to be removed through grinding. Exposed concrete should be polished to shine. Work site is covered and enclosed. Water and power available.

140 sqm of showroom floor to be sanded. I don't want this cut right back, but rather remove current coatings enough to stain 2 X coasts of Japanese black and then finish with 2 X matte protective coats. Wood is Jarrah. All furniture has been removed and ready to go. Need done by end of month please.

Sand and polish floorboards 11.2 square meters

Minor sand and polish. Solvent based polish. Mostly just to remove/replace existing polish that is peeling. 6.7sqm

Need timber floors sanded and polished in house, approx 70m2 space **This job would not be until first week of November**

Hello, Anyone know how to professionally polish concrete floors? Ive had quotes for but let me know yours please Not sure on the desired finish - open to suggestions ! 3 bedrooms 3x3m each Photos to follow

Open plan Living Kitchen Hallway -- wood flooring - needs sanding back and then varnished again

We’re moving into a new office space that has 110m2 of existing engineered timber flooring. The current finish is too dark so we would like the floor sanded back to oak and then re-stained in a light lime wash finish. All existing furniture items in the space will be removed prior to works commencing.

Require sand refinish with satin varnish 80sqm of timber flooring

Urgent time sensitive. Need asap start. Just bought house, have 10 days before need to move in. Floors need work. Description of task: EXISTING FLOOR: - have 46 square meters of chevron timber floor in apartment. Don’t like the colour - need floor sanded and refinished to match lighter Color of timber flooring in bedroom Install New Timber Floors in Bedrooms - have all materials purchased - would like to remove carpet in each bedroom (each room is 10 square meters) and install new timber flooring (materials provided) - the living room refinishing of floor should match the new floors for the bedroom as close as possible - plank installation concrete stick - linear pattern (not chevron) Whoever can start first is who I will book Cost being offered based on what I have been quoted by a company but they can’t start until later New floor installation: 50 per square meter - 20 square meters = approx 1000 AUD Existing floor sand and refinish 34 per square meter - 46 square meters = approx 1,500 Happy to negotiate Need someone who can start asap

25sqm living room area timber floor. There are stains soaked in so it needs sanding + staining + coating. Maybe just half of the area as the rest are covered by sofa and carpet.

Recently entered into contract for 2 bed apartment and preparing for the impending renovations/touch ups required before I can move in. Currently tenant in place for next 45 days so trying to secure everything in advance. Would like to have the carpet in the bedrooms removed and replaced with chevron engineered timber flooring (to match the living room). Also need to have the entire floor refinished. Its currently a dark brown/wood colour and I would like to change it to be like a grey frost. - Due date: Before Thursday, 2 May 2024

We require ~65sqm of vic-ash floorboards to sanded in a 2-bedroom house (with vic-ash stairs also needing refinishing). The wood has discoloured orange so we'd like to use a water-based finish eg. Bona traffic HD I have calculated floor areas (excluding bathroom & balcony and kitchen joinery) as follows; Ground Floor: 31m2 Upper Floor: 30m2 Stairs: 4.5m2 Total: 65.5m2 Start date: 01 February 2023