Find an experienced plumber in Braeside

Need a shower installed into this enclosure for a cold rinse off. Doesn’t need to have any hot water but will need to be connected via water hose for the water supply. Ideally want a tap that you push in and it sprays water for 40 seconds before pushing it back in. The trailer is being delivered to Hobart on 17th and needs to be completed before then!

I need to setup a fixed connection from the trade waste drum to the sewage pipe.

Hey There lovely people Seeking someone to swap over 2 tap sets, please also collect from bunninings the tapes The current taps had corroded in the internal parts and would rather swap then repair . Taps will be reimbursed directly so not in the bid

I need a certified plumber to cut into and modify an existing 20mm water line, install a ball valve so I can then connect either line to a tap or to a garden hose. Or install a 20mm T shaped line with two ball valves.

Come and quote Availability to complete the job in the next week Pluming needed for underwater treadmill Content treadmill a cold water supply (hose pipe) to top the tank up periodically. a drain that will handle the drainage of say 50 litres or so gravity drained from the treadmill as & when you want to drain off some water. If you do not have a drain then you can use a lift station which is a simple pump that will take the drain water and pump it to a nearby drain point in building. You may also need to drain the treadmill in the event that a dog contaminates the water OR power goes off in building, drain would need to handle the waste of say 1000 litres. A drain is also required to handle the backwash of filter - approximately 150 lpm, you can run a pipe to a drain sewer line for when you need to back-wash filter.

Pluming needed for underwater treadmill Content treadmill a cold water supply (hose pipe) to top the tank up periodically. a drain that will handle the drainage of say 50 litres or so gravity drained from the treadmill as & when you want to drain off some water. If you do not have a drain then you can use a lift station which is a simple pump that will take the drain water and pump it to a nearby drain point in building. You may also need to drain the treadmill in the event that a dog contaminates the water OR power goes off in building, drain would need to handle the waste of say 1000 litres. It is not essential to have floor drains, but if viable then do so. A drain is also required to handle the backwash of filter - approximately 150 lpm, you can run a pipe to a drain sewer line for when you need to back-wash filter.

Looking for someone to come to the property and give me quote on this I'm installing an underwater treadmill in a factory a cold water supply (hose pipe) to top the tank up periodically. a drain that will handle the drainage of say 50 litres or so gravity drained from the treadmill as & when you want to drain off some water. If you do not have a drain then you can use a lift station which is a simple pump that will take the drain water and pump it to a nearby drain point in building. You may also need to drain the treadmill in the event that a dog contaminates the water OR power goes off in building, drain would need to handle the waste of say 1000 litres. It is not essential to have floor drains, but if viable then do so. A drain is also required to handle the back-wash of filter - approximately 150 Ipm, you can run a pipe to a drain sewer line for when you need to back-wash filter.

We don’t have hot water at our workshop. Our hot water system has stopped working suddenly, maybe some electrical issues or something. I have attached some photos of the outside unit.

The WC flushes ok but the water level comes high up the bowl before emptying reasonably quickly. I think it may need to be unblocked further down the piping. - Due date: Flexible