Find a professional kitchen sink installation service near you

Kitchen sink is draining slowly due to a blockage in the waste pipe. This has happened before. The pipe runs into the cellar and can be opened there to clear the blockage. Looking for someone to open the pipe, remove the blockage, reconnect it and check the sink is draining properly. Should be a straightforward 1–2 hour job.

Couple of bathroom ligth socket nedd to be replaced as its button is bdoken There is gap in kitchen which nedd to be closed so rats cant enter Kitchen door screw came off need it to be tightened

I need my new kitchen sink & tap replacing. Current is stainless steel, 1.5 and replacing to a ceramic one (1.5). Current sink is approx 94.8cm W x 50.6cm D We have bought the closest size sink, as advised by the retailer the worktop needs cutting slightly larger to fit the new sink. Worktop is standard material no quartz or anything. New sink - https://www.tapwarehouse.com/p/vellamo-1-5-bowl-ceramic-inset-sink-1010x530 New tap - https://www.tapwarehouse.com/p/butler-rose-cecily-traditional-mono-kitchen-tap-pv Preferably a weekend (anytime) for availability please! ☺️

My kitchen sink is blocked , the water won’t drain

The joints of the pipes leading away from my kitchen sink leak into the cupboard below.

Just moved into a house and the overflow pipe is not connected to my sink i need someone to just come and connect it up

1 tap removing and replacing with a new tap (i already have one), and a small leak fixing at the angled service valve. Under the kitchen sink.

Hi, I'm looking for a plumber to finish the sink and dishwasher in my new kitchen in Wembley. The quartz worktops are fitted and the sink cut-out is done. The job: - Fix an inset stainless steel sink (Sauber, single bowl) into the quartz with silicone – clips too ideally. - The mixer tap and the sink's square waste and overflow are already fitted to the sink. - Connect hot and cold to the tap, with isolation valves - Fit a 40mm trap with a dishwasher spigot and connect it to the waste pipe - Plumb in the dishwasher: cold feed (tee and appliance valve) and drain hose Pipework: [hot, cold and waste are already under the sink / need extending maybe] I have the sink, tap and waste kit - alongside the trap. Please send a fixed-price quote and your availability – weekdays preferred. Happy to send photos of the sink, parts and cabinet.

Kitchen sink tap to be replaced

Previous carpenters spoiled the kitchen top in sink side . I just want to re do it everything properly.

Currently have a dripping faucet from the kitchen sink tap, would appreciate both repairing/replacing the corroded pipes section (from photo) and the installation of a new kitchen mixer sink tap (already provided).

We have a leaking kitchen tap, and I’ve already purchased a replacement from B&Q. The job involves shutting off the main water supply outside, removing the existing tap, and installing the new one. It should be a straightforward job for a plumber, taking approximately 30 minutes.

Booked kitchen sink. Can be looked at anytime after 2pm today

There’s a large spider (giant house spider I think) in one of my kitchen sinks (I presume it’s still there, I haven’t been near enough to it to check) and I really need it gone because my dishes are piling up and I’m too much of a wuss to even use my kitchen at the moment 😂

We just need a straightforward kitchen sink and tap replacement. We’re replacing the existing sink with a new Bower 1000 x 500mm 1.5-bowl stainless-steel sink and fitting a new GROHE mixer tap, which I’ve already bought, as shown in the photo. Everything will be supplied and ready to fit. It should be a small, straightforward job. Please send me your best quote.

I’m looking for a plumber to repair my kitchen sink waste pipe. The existing P-trap/U-bend has come apart and I haven’t been able to refit it correctly. I purchased what I thought was the correct replacement, but it appears the fittings/washers aren’t compatible with my existing pipework. Job required: * Assess the current waste pipe setup. * Supply any correct fittings/washers if needed. * Replace and fit a new P-trap/U-bend. * Ensure all joints are watertight and test for leaks before leaving. The sink is currently unusable as the waste pipe has come apart (see photos). Please let me know: * Your availability. * Whether you’ll bring any standard 40mm waste fittings that may be required. * Your total price including any small parts. Looking to have this fixed as soon as possible.

I think the u bend is blocked and will need removing and cleared. I have tried baking soda and white vinegar followed by a stronger sink cleaner, and whilst it is better it is still not draining.

I’m looking for a plumber to attend and investigate a drainage issue in my kitchen. The problem started while the water from the washing machine start to back up into the kitchen sink, and the sink is now draining very slowly / has become blocked. The washing machine and kitchen sink share a common waste pipe, so there may be a blockage further down the drainage line. I would like someone to come out, identify the cause of the blockage, and carry out any necessary unblocking works.

Kitchen sink is blocked, water starts coming out of other sink for some reason. Tried one shot it didn’t do anything, also tried long metal snake to unblock but it didn’t do anything