Find an experienced flooring expert in Melbourne

Lay Laminate/floating floor and underlay in one room. 15sqm total.

I need a section of flooring patched where an old cupboard was removed. The area is approx 1.2m (length) x 0.6m (depth). I will supply the matching floorboards — just need someone with the tools and experience to cut and install them so the patch blends in with the existing floor. • Boards supplied • Installer to bring own tools (saw, mallet, glue/tapping block etc.) • Skirting to be re-fitted after boards are down Looking for someone experienced with timber/floating floor installation. Price negotiable.

Have had new flooring installed, need skirting boards to be replaced in apartment (lounge room, dining room, and hallway). Have the skirting boards that were removed, just need to be attached to wall with glue/nails. No cutting needed.

Moving into new apartment. Need vinyl flooring installation done

Need to remove carpet and install 2 rooms flooring and fix scirting board of hallway which is 2 meter and living rooms

2nd floor flat needs new carpet and old carpet removed and disposed of. The carpet and underlay will need to be picked up from Carpet Call warehouse in Notting Hill, then installed at a flat in Collingwood, preferably on Tuesday 9th September. Carpet width is 3.6m. Install is approx 8.7 linear meters over 3 rooms. Needs to be done by 11 Sept at the latest.

Have purchased second hand floor boards and hoping to have current tiles and floorboards removed and new ones laid. ~40m2 area. Very small apartment. I will be there to help and manoeuvring furniture from one room to another to help process. Thanks

Supply and install flooring for 1. Bedroom approx 15 sqm 2. Possibly also Lounge/kitchen approx 15sqm Tiles,laminate, hybrid or vinyl for either or both spaces

I need the carpet removed and floor boards installed in my two bedroom apartment. Quotes through flooring businesses are a bit too expensive, so I'd rather choose and buy my own floor boards from Bunnings and get someone experienced to install them for me, I'm not a handyman at all but will be keen to help moving stuff etc.

Howdy. I need someone experienced to lay a floating floor. Area is 7 x 5.4 metres. I have the the 5.5mm hybrid boards already purchased. The room won't be completely vacant. We thought we could shove all the furniture (that we cant put elsewhere cos it's too big) into one half of the room, lay half the floor then when it's done, move the furniture to the other side of the room and lay the second half. Happy to pay the going rate.

I need budget carpet supplied and installed in a small bedroom (2.9m x 2.9m) in St Kilda. The old carpet has already been removed. Looking for: • A darker coloured carpet • Prefer solution-dyed nylon or polypropylene (must be moth-resistant – had issues with wool in the past) • Includes underlay and installation • Happy to use end-of-roll or leftover stock to keep the cost down Would like it done in the next week or so if possible. Please include your total cost in your offer.

I’m looking to get a quote for recarpeting my apartment. It’s one bedroom and a hallway. It’s not urgent so I’m happy to be flexible. The carpet is currently a light brown but I’m looking to install something similar to what’s in the communal hallway which is a dark charcoal.

Two rooms at 2700x 3500 mm. I will supply the boards and underlay. I will pull up the carpet and underlay so both rooms are clean, flat and ready to go. You will supply your own tools.

12sqm bedroom need floor installation, I have the laminate ready to go inside the apartment. Also one-side skirting board is needed. Thanks.

Need to remove existing carpet and lay floating floor board. Approx 25 sq m

Looking for someone experienced to lay new floorboards over existing floorboards in a small home office space in Prahran. Room Size: Approx. 2m x 3m (6m²) Materials Supplied: We already have the new floorboards ready on site Existing Floor: The new boards will be laid on top of existing floorboards – no removal required Room Status: Room is cleared and ready for the job Location: Prahran, VIC Photos: Attached for reference Deadline: Must be completed by 10am, Wednesday 9th April What You’ll Need to Bring: All tools and equipment needed to cut and install the boards Experience with floorboard installation over existing flooring Care for clean, professional work and tidy finish To Apply: Let me know about your experience with similar flooring installs Confirm you’re available to complete the job before the deadline Only apply if you're confident you can meet the timeline and deliver a quality finish.

Hi All, I’m in need of a small business to supply / installer / dispose carpets to bedrooms. We get approx. 6 or so of these rooms to do a month. I have all the specs and floor plans for quoting I need someone reliable and efficient to complete on going jobs.

Floor plan in last photo! I have purchased decorative moulding so be installed in the following rooms: - 2 x bedrooms - 1 x hallway - entryway - lounge room - small part of kitchen Second floor apartment. Walls are rendered brick. Old skirting has been removed. I have 24 lengths of 5.4m of skirting on-site in my garage. I have power available with a long extension lead for tools. I can help with some of the labour (such as taking cut pieces upstairs). Desperate for this to be done Friday as we are moving in Sunday and need time to paint it. The guy I had hired to do the job flaked on me :(

I have a lounge room that is currently carpeted and want to install solid wood Baltic pine floorboards. I have already acquired the floorboards and taken up the carpet. The floor underneath is MDF or particle board. I need a 2mm acoustic underlay put down and the flooring installed. I will supply the boards and underlay. Total area is 33sqm.

I have purchased some hybrid flooring which will be delivered to the apartment this week. I need someone to lay them, you will need to provide the materials they are laid on and with. I have removed all skirting. You will be laying in a lounge kitchen and a small hallway totalling approximately 24 square meters. The floor is concrete and requires not much prep, there are a few nails I was unable to remove. The flooring is Stonehaven Copper Oak 520 I think it’s Godfrey’s

Polish concrete in 80 or so square meter area

Want to sand the current floorboards and restain them. Smooth finish - 75 square metre apartment.

We are getting ready to sell our property and our floorboards need a little refresh! We have about 30 sqm of floorboards requiring sanding and polishing. The area regarding is our living room and kitchen, all furniture will be moved in the bedrooms for easy access. There are three steps in the living area as well.

Polish vinyl floor boards

Cut and polish an old piece of marble to smaller size suitable to use for a large pastry board

Sand and polish Baltic Pine flooring to 2 bedrooms, lounge, kitchen and entry oil polish.

1. Installation of recycled floorboards (approx 17 sq m) on joists. Needs to be flush with existing wooden floor (on concrete), so some experience will be necessary. 2. Sanding + polishing of entire floor (approx 37 sq m).

Grind and polish an existing concrete floor in a studio apartment. Approximate size - 340 x 510

Floor polisher Refresh Polish & fill wooden floors 2 bedrooms & living area & hallway & small kitchen approx. 60m2 West St Kilda

120 sqm of concrete flooring need to be polished

Reinstating our existing concrete floors and require a light grind and polish on the floors, mainly to remove the circles left from our chairs. Approximately 100 sqm.

Sand and polish timber floor in kitchen

A 2 Bedroom apartment with timber floorboards in the main living area requires maintenance, polishing and varnishing. Floors are scuffed by furnishing over time as per attached photos .

Requiring assistance in polishing living room area Flooring is made of engineered timber, can provide specifications for you to ensure it can be polished. Happy for you to come to inspect prior to works to make sure. Find attached floor plan, only living area to be polished.

Need to sand and polish approx 10sqm of Tasmanian oak flooring to match as close to new engineered flooring

Existing garage floor is smooth and intact. No repairs necessary. The epoxy coating is peeling and needs to be removed through grinding. Exposed concrete/ screws should be polished to shine. Work site is covered and enclosed. Water and power available.

Sand, stain and polish wooden kitchen floor to match living room floor. Currently it is a bit darker, and has some light areas due to kitchen remodel. No nails and fairly good condition floor. Quote should include all labour, materials and equipment.

I need the floors of my apartment sanded, polished and coated. Dimensions of each room are: 3620mm X 3600mm 3280mm X 3350mm

Need some work done to the concrete floor: -cut and polish 2 strips approximately 3 metres. -buff and seal the whole floor approximately 50square meters No hurry - to be complete sometime next week from 12th of May onwards

I need to sand & polish a dining table made of al old Chinese door

Open plan Living Kitchen Hallway -- wood flooring - needs sanding back and then varnished again

We’re moving into a new office space that has 110m2 of existing engineered timber flooring. The current finish is too dark so we would like the floor sanded back to oak and then re-stained in a light lime wash finish. All existing furniture items in the space will be removed prior to works commencing.

Require sand refinish with satin varnish 80sqm of timber flooring

Urgent time sensitive. Need asap start. Just bought house, have 10 days before need to move in. Floors need work. Description of task: EXISTING FLOOR: - have 46 square meters of chevron timber floor in apartment. Don’t like the colour - need floor sanded and refinished to match lighter Color of timber flooring in bedroom Install New Timber Floors in Bedrooms - have all materials purchased - would like to remove carpet in each bedroom (each room is 10 square meters) and install new timber flooring (materials provided) - the living room refinishing of floor should match the new floors for the bedroom as close as possible - plank installation concrete stick - linear pattern (not chevron) Whoever can start first is who I will book Cost being offered based on what I have been quoted by a company but they can’t start until later New floor installation: 50 per square meter - 20 square meters = approx 1000 AUD Existing floor sand and refinish 34 per square meter - 46 square meters = approx 1,500 Happy to negotiate Need someone who can start asap

25sqm living room area timber floor. There are stains soaked in so it needs sanding + staining + coating. Maybe just half of the area as the rest are covered by sofa and carpet.

Recently entered into contract for 2 bed apartment and preparing for the impending renovations/touch ups required before I can move in. Currently tenant in place for next 45 days so trying to secure everything in advance. Would like to have the carpet in the bedrooms removed and replaced with chevron engineered timber flooring (to match the living room). Also need to have the entire floor refinished. Its currently a dark brown/wood colour and I would like to change it to be like a grey frost. - Due date: Before Thursday, 2 May 2024

We require ~65sqm of vic-ash floorboards to sanded in a 2-bedroom house (with vic-ash stairs also needing refinishing). The wood has discoloured orange so we'd like to use a water-based finish eg. Bona traffic HD I have calculated floor areas (excluding bathroom & balcony and kitchen joinery) as follows; Ground Floor: 31m2 Upper Floor: 30m2 Stairs: 4.5m2 Total: 65.5m2 Start date: 01 February 2023