Hire a reliable appliance service in Croydon

Repair plastic drum housing leak on Zanussi Z716WT83BI washing machine 📝 Task Description: My Zanussi Z716WT83BI washing machine has developed a leak from underneath on the right-hand side. After inspection, I found a hole or crack in the plastic outer drum housing (see attached photo). I need someone experienced with appliance repairs or plastic welding to: Assess the damage to the outer tub, Either patch the hole using a strong waterproof plastic repair (e.g., epoxy or plastic weld), Or advise/assist with replacement of the outer drum section if necessary. The machine is otherwise working fine — just leaking water from this hole. 🧰 Requirements: Experience with washing machine repairs (preferably Zanussi/Electrolux group). Own tools and repair materials. Ability to ensure the repair is watertight and safe. Optionally, advise on replacement part sourcing if patching isn’t suitable. 📍 Location: Croydon ⏰ Preferred Timing: Flexible — ideally within the next few days. 💵 Budget: Please quote your price (including call-out and materials if possible). 📸 Additional Info: I can provide photos of the hole and interior area upon request. Access to the back and sides of the machine is available.

I need my top loader washing machine repaired. I messed it up by opening it and trying to fix it myself. It had a E30 error code and I took the top off to access the latch and in doing so I’ve made things worse. Need someone with experience with similar appliances to come have a look at it and potentially help me fix it

Kitchen cupboard needs bottom panel and shelves removed to accommodate dishwasher. Back of the cupboard may need to be altered to allow access to the mains

my extraction and ac lack power so does my camera box not quitre sure what is happening

Not pumping water - but making noise as if trying

I need a gas engineer to disconnect a gas pipe from cooker and it will need to be capped

Motor on recliner not lighting uo ...changed fuse but still not work

We currently have two Heatmiser Neostat v2 thermostats installed in our home, along with an RF Switch v2 and a UH8-RF v2. One of the thermostats is used to control our radiators, while the other manages the underfloor heating system. We’ve been having ongoing difficulties getting either thermostat to consistently switch the heating systems on or off. We’ve tried resetting and re-pairing both systems several times. While they may initially appear to function correctly for a short period, the thermostats inevitably stop communicating with the RF Switch and UH8-RF devices. At first, we suspected that the issue might be linked to our old boiler (which was over 20 years old), but having replaced the boiler, the issue remains unresolved. We also attempted to relocate the thermostats closer to the RF units to improve signal strength, but this has made no difference. To date, two separate boiler engineers have tried to diagnose the issue, but neither has been able to identify the root cause or offer a solution.

I bought a washing machine that needs installing

I'd like my chimney liner checked for proper installation and that the right type of gas fire has been installed. Tasker should be gas safe registered.

Taking away a dryer. It's outside the home, runs but I think the heating element isn't working

Matrix commercial cross trainer E5XC screen has stopped working so only works on manual mode. However, it does occasionally come on and works fine and there is definitely power to the machine, which has been checked by an electrician. I have been advised it could be needing a service and clean as moisture may have got in to the components. The task is to service and clean with any parts being extra.

We have 4 chimney breasts, 2 with open fires, that all have old gas fireplace restrictor elbows (think that’s what they’re called?) that are sticking out of the floor next to them. Photos of all 4 included. We need someone to remove them and cap off the pipe under the floorboards. NOTE: - Corgi gas safe registered engineers only please. - We have original floorboards and would like someone who will be sensitive to this and not gouge them with screwdrivers and cause damage (you would be surprised how often people do this). Thanks

We have a Bosh electric hob. One ring mo longer turn on.

Dryer is turning on but not drying clothes properly

Large freezer need it removed because stopped working

The washing machine moved forward.

I would like to replace the cooker hood that I have in the kitchen with a different one that I have purchased. The replacement is the same size

Microwave is not switching on despite all power sources being on. It is an integrated kitchen microwave.

Change plastic piping behind washing machine