Find experienced local carpenters in Sydney

Need a plumber to uninstall old dishdrawers and install new dishwasher. There should be no need to adjust joinery according to measurements however we need the space measured properly and be confident that new dishwasher will fit before uninstalling old dishwasher. Old dishwasher will be kept and stored on site. Location: Office in CBD Time: Before 9:30am Measurements for the space: W599mm, D 573mm, H 820mm Measurements for new dishwasher: W598mm, D570mm, H805mm (15mm height gap) https://www.winnings.com.au/p/miele-gen-5000-under-bench-dishwasher-g5000scuclst

I require help to purchase & pickup wood planks from Bunnings (Total cost of materials is $173.50), cut to specific size and deliver to Potts Point NSW. I will reimburse the full cost of materials by EFT on delivery. (apologies to previous quotes, I was not aware of the fee structure imposed by Airtasker). 4x Specrite 1200 x 600 x 18mm Timber Multi Use Pine Panel (I/N: 0419619) https://www.bunnings.com.au/specrite-1200-x-600-x-18mm-timber-multi-use-pine-panel_p0419619 Cut:100cm x 30cm (with corners cut out 4.5cm x 3.4cm) [4.5cm is cut from the 100cm side, so the length with the corners removed should be 91cm x 23.2cm] 1x3mm MDF Panel Standard 2440 x 1220mm (I/N: 0590054) https://www.bunnings.com.au/3mm-mdf-panel-standard-2440-x-1220mm_p0590054 Cut:200cm x 98cm

I need some one to finish installing shed, panels already assembled

1. Replace front door and back door 2. Possibly replace two sets of balcony doors 3. Replace missing skirting that came away when the floors were laid. Approx 8 linear metres in two places 4. Simple cupboard 1m wide x 0.9m high x 0.6m deep in laminate/polytec, with 3 internal shelves 5. 2 shelves above the cupboard 1m wide x 0.4m deep To help me with a more accurate quote you don’t need to put in the cost to supply the doors, that will be extra I’ve added a photo of the kind of cupboard I’m looking for. It would sit between a side wall and a fireplace hearth (not used) in the middle of the room. It would have a couple of shelves inside. Above it I want two shelves and I can put plants on

I need to fully expose the fridge alcove in my kitchen to utilise its full dimensions but there’s currently a skirting board on the inside and the above cupboard overhangs by 2cm. I need to fit a new fridge freezer in there that uses the alcoves full dimensions. Needs to look nice / be finished well.

Need a bulkhead built as or similar shown in the design picture. No need for storage of bottles. Need to be quick and nice and strong as open soon Send me your offer, plan and time

Need joinery cupboard installed in hallway. Drawing uploaded with measurements, doesn’t have to be exact amount of doors etc, just a guide as to what we are looking for. Also need laundry cupboard joinery and above office desk cupboards made. Less important measure and quote on-site, open to suggestions for this.

I have a 108cm wide space that needs a bookshelf build with cabinets at the bottom to hide the nbn box and extra cords. Something similar to the IKEA cabinet shown just basic and built into the space as pictured below

Cut part of a shelf inside a kitchen cabinet in a flushed manner. I have included a photo with drawn lines on how the shelf should be cut off from the cabinet.

Looking for a tradie to move large metal shelf approx 1.5m+ slightly to the right as it is blocking our usage of the dishwasher. The shelf will move to the right about 6-10cm. It is currently screwed into a white tile wall and silicon on the side. We need to remove it from the wall and shift its location. Only available on Monday April 15 to complete the job Please quote

Joiner or equivalent will need to take two internal doors off their frame and cut to size. Each door needs roughly 1/2 to 1cm taken off the bottom as a result of a new carpet being installed. The doors then need rehanging.

IKEA straight bench top and 4 cabinets, length 3m therefore join and cuts needed

Cut a few pieces of skirting

I would like a handy gardener to set up a vertical potted plant wall garden in the in-house atrium. Looking to install the structures and add the potted plants. Materials required is out of pocket and can be sourced within an agreed budget. The photo attached is a white wall of our atrium and the 2 other photos are inspiration photos of a flexible wall garden. The approved quote accounts for the time and effort for the set up, which I expect to be within 2 hours. Happy to understand if there are other considerations.

I need a piece of ikea furniture cut (fibreboard). Should be pretty easy, I just don’t have the tools. It’s the top of a desk. I have measurements to cut written on (see photo)

Urgent or appreciated if can be done asap. Please go into the Sydney Botanical Gardens to the Herb Garden Pavillion Lawn and measure the distance between the sandstone pillars along with height. Measurements required: (the two pillars facing the large set of stairs ) 1- From inside edge to inner edge from pillars facing the stairs ( the distance between the pillars 2- The distance between the centre point of the pillars ( find the halfway or middle point from one pillar and measure to the halfway point of the other pillar. 3- Meaure from the outer most edge of the pillar to the outer most edge of the other pillar. 4- Measure the height from ground to the lowest point of the beige wooden timber facade at the top of the pergola between the pillars 5- measure the height from the ground to above the beige wooden facade between the pillars ( to the green wooden timber point) Please write down and take photos of the measurements, also double check these measurements are correct. I can provide further instructions and photos should you need any assistance.

I have purchased a shed from Easy Shed that I would like to be installed and placed in our car space. Measurements of the shed are 1.5m x 1.98m x 0.78m.

Urgent require labor hand to be at Newtown within 15 mins. To help take material upstairs with cabinet maker on site.

Remove three 1200mm x 2300mm wall panels in outdoor shed that have been water damaged and replace with alternative weatherproof boards for interior and (new) Colorbond for external lining (behind slats shown in external photo). - Due date: Flexible

Im looking for someone to build a small Absco shed in my backyard. I can supply all tools required. Experience a must. https://abscosheds.com.au/garden-sheds/space-saver/space-saver-storage-unit-1-52mw-x-0-78md-x-1-95mh/