Find experienced local carpenters in East Sydney

I want a confessional box prop made with two sides one for “priest” to sit in and one for someone else to sit in with a partition window in between. Preferably with barn doors and I’ll add red curtains to the top. Preferably able to be pulled apart for easy transportation. Needs to be ready by Friday morning at the absolute latest preferably Thursday evening (25th) Price is place holder. Please send your quotes!

Install of 5 white boards (900 x 600mm) in office space. 1 of these will be replacing a previously installed whiteboard of the same make. Please see the instructions attached.

Need to complete a kitchen install which is half done. The cabinets are constructed. Need to install stone bench tops (already cut to size and on site, install sink, fix and finalise cabinets, tile small floor area and do some touch up painting. Windows in pictures have already been painted. All material on site. Location is on Castlereagh st in the city with no parking on site.

I require someone with competent soldering/electronics skills to make some modifications to a circuit board (OSSC - video scaler). Comprises of essentially two steps - the removal of a surface-mounted resistor and then the soldering of a thin wire connecting two points. The job should be relatively straightforward and quick. https://youtu.be/Bsiza8GbgMg?si=4s4crV21UYqwKUNX&t=222 (appropriate section starts at 3:42) https://www.retrorgb.com/ossc-v1-8-hardware-now-available.html Any questions, please just ask. Thanks. I will provide the board (dis-assembled from the rest of the unit) and ask that you provide an appropriate thin wire. Inner city Sydney or around the Ryde area preferred.

I need a batten style front door and frame like one in the photos supplied and installed into an existing build. Old door will be stripped out ready for new door and frame. Dimensions are roughly 1800x2400. The frame will not require glass, just the door and frame. Door and frame must be fitted with a pivot style system.

I am a little disabled and need a lounge chair made higher to make it easier to get in and out of.Platform 70x78x5 Need to measure in unit Sydney CBD

I would like a basic stage built (which is simply a flat 40cm off the ground platform that can support human weight). I would like this stage to fold up and have wheels so I can store it when not in use. The size i need is about 4.5m x 2m when unfolded. I attached an image below to show what it should look like. Wouldn't mind it is made out of wood or steel, as long as it works and is portable.

We are seeking an experienced professional to install vinyl roll flooring in a commercial space for a pop-up store. The flooring rolls have a herringbone design, and the installation must be precise and of high quality. Requirements: • Proven experience in installing vinyl roll flooring • Expertise in working with herringbone patterns • Ability to ensure a smooth, even, and professional finish • Knowledge of proper subfloor preparation techniques • Attention to detail and commitment to quality workmanship

Hi there, I'm looking for someone to build a coffee cart for a brand. It needs to be easily moveable (on wheels), with a timber base, top and sides. Quote to include labour as well as all materials. Painted white sides and base, timber or wooden top/bench. One shelf inside the cart for storage. Ideally it would be semi collapsible or lightweight / easy to move whilst still being sturdy enough for a coffee machine's weight. Roughly - 1.2-1.5m wide - 1m tall - 60cm deep I've attached some references below as to what we're looking for (minus the branding). I will supply the umbrella.

There are some marks on the walls that need to be covered and re-painted as well as a some piece that have been taken out of the kitchen bench that we need fixed

Looking to get a quote for custom joinery for our laundry and bathrooms. Laundry: Tall skinny cupboard on left (one/two shelves) + x1 overhead cupboard with two doors (1 shelf) approx 40cm depth. Benchtop / workbench needed approx 60cm wide Bathrooms (2): Looking at getting cupboards built in under the existing sink. Ideally double doors & 1 internal shelf. Both bathrooms to be the same. Material: White melamine / similar - cheapest but also good quality. Benchtop were open but ideally something nice. Looking no more than $2500 cash.

We have a new dishwasher ready to be unboxed and installed. Old dishwasher needs removing and taken away. As we are a commercial building an induction is required - this costs $26 so please build this cost and 30mins of your time to complete into your price

Construct a shelf similar to the one in the picture. Each shelf must be sturdy enough to support the weight of 4 chairs. The shelf should not be painted but must include wheels for easy mobility.

I need to change this reception desk (as per the pictures) to a different desk something similar to an office desk , the quote for the job don't include materials we will pay for materials seperatly, you will need to despose of the existing desk( which is partly mounted to the wall ) need to make good the wall to follow existing design ,you will need to source the new table and materials as well , we based in Sydney CBD , parking is available on site need to book loading zone , thanks Elly

Need a professional carpet with a few marks which may need extra treatment

Make a wall shelf similar to the one in the picture. It must support the weight of 4 chairs on each shelf. It does not need to be painted. Approximate measurements Length: 3.5 meters Depth: 0.72 meters Height: 3.25 meters

Remove big round dark stain

Removal of two external doors, install correctly two new ones and painting them exterior paint. We will buy the two new doors from the hardware store after measurements. All materials and paints my costs. Carpenter work.

Carpenter needed tomorrow to give a group of other chippys a hand finishing a deck at Darling Harbour. Must be able to invoice on ABN. Please post your hourly rate/day rate

Urgent or appreciated if can be done asap. Please go into the Sydney Botanical Gardens to the Herb Garden Pavillion Lawn and measure the distance between the sandstone pillars along with height. Measurements required: (the two pillars facing the large set of stairs ) 1- From inside edge to inner edge from pillars facing the stairs ( the distance between the pillars 2- The distance between the centre point of the pillars ( find the halfway or middle point from one pillar and measure to the halfway point of the other pillar. 3- Meaure from the outer most edge of the pillar to the outer most edge of the other pillar. 4- Measure the height from ground to the lowest point of the beige wooden timber facade at the top of the pergola between the pillars 5- measure the height from the ground to above the beige wooden facade between the pillars ( to the green wooden timber point) Please write down and take photos of the measurements, also double check these measurements are correct. I can provide further instructions and photos should you need any assistance.