Find an experienced handyman in East Sydney

Kitchen sink cartridge has broken and needs to be replaced so handle can be reattached. I don’t have the replacement part unfortunately so would need you to provide one

Need a licensed electrician in Sydney to adjust wiring for ceiling fan/light switches. Currently there are two switches: 1. Low light 2. Main light + ceiling fan together I’d like it changed so that the fan is linked to the low light instead. Main light still needs to work properly. Please quote including callout/labour.

2 x bin station vinyl wraps - overall size 1400w x 620d x 825h 2 x floor graphic - 1400w x 1200h each 4 x window graphic - 700w x 2000h each See mock-ups for further detail and photos of bins to be wrapped. The bin holes, and bin door edges will need to be cut accurately on-site. Time: Must be installed either after 5:00pm Wednesday 17th June or before 10:00am Thursday 18th June. Location: 1 William St, Sydney NSW 2010

I’m a builder in Need of Gyprock installed and also an access panel

Looking for an experienced handyman to assist with a few small maintenance jobs in my apartment: 1. Laundry cupboard doors The two cupboard doors are no longer closing properly and do not sit flush together when shut. I suspect the hinges may need adjusting, repairing, or replacing. 2. Toilet seat The toilet seat has become loose and needs tightening. 3. Shower tap The shower tap appears to be loose and does not fully stop the water flow unless it is tightened excessively. Looking for someone to inspect and fix the issue if possible. Please bring any basic tools you may need. Ideally looking for someone with experience in general household maintenance and minor repairs. Location: Darlinghurst area, Sydney Please provide your availability and any relevant experience when making an offer. Thank you!

2 d roller blinds; 1 x 2.1, 1 x 2,4 to be installed in a house

1. Internal Door Adjustment * One internal door does not lock properly when closed. * Door appears slightly misaligned and needs adjusting so the latch catches correctly. 2. Front External Door Repair * Part of the front door frame/panel is deteriorating due to age and material is falling out. * Area needs to be filled/repaired, gap-filled where necessary, and painted. * Only the repaired section requires painting. 3. Bedroom Windows – Possible Water Ingress * Swelling/damage visible above both bedroom windows. * Needs inspection to identify where water may be getting in and repair as required. 4. Ceiling Gap Filling * Black dust/debris is falling through from the ceiling area. * Gaps/cracks need to be sealed/fillled to prevent further debris coming through.

Need experienced plasterer/gyprocker for wall joint setting and finishing in older Rozelle cottage. I have removed the horizontal timber battens/join strips from the internal walls. Looking for someone experienced to: - Pre-fill gaps - Tape long wall joints - Apply 2–3 coats - Feather out nicely Feel free to provide additional cost for sanding/paint prep Materials already purchased: - Gyprock Paper Jointing Tape - CSR Gyprock Base Coat 45 - Gyprock Less Mess Topping Compound There's around 50 lineal metres of joints to fill Please include: - Your day rate or estimated total cost Location: Rozelle NSW

I am replacing the roller blinds in my kitchen and bathroom so will need the existing ones to be removed and the new ones installed

I need a very simple shelf made to fit this sink in my back room as a kitchenette. It's an usually angle so need measurement and sizing up Please send me your quotes

I want to install a shower hob (prefab or otherwise) to help redirect the water in the wet room setup of my bathroom. The floor undulates so I want to do this to ensure water from the shower only goes down the shower drain. Looking for an idea on pricing and timing for remove of shower screen, hob install, waterproofing and tiling, reattach shower screen

Location: Flood Street, Bondi. Toilet seat has become loose and needs to be secured

I need someone to replace my door handle on my back door and replace my lock on my letter box.

Replace door Jam, hang door, install ahndle and lock

Cement render of painted masonry walls

Description: Looking for a licensed electrician to rewire two table lamps and ensure they are safely earthed. These are metal lamps and require proper earthing to the body. Scope of work: Rewire 2 x table lamps Add earth connection to lamp body Install new lampholders, cable, inline switch, and plug Test and confirm safe operation All hardware is supplied, including: Bakelite E14 Lampholder (Edison Light Globes) Black 10A Inline Switch 240V (Edison Light Globes) Fabric Covered Braided 3-Core Lighting Flex (Edison Light Globes) Black 3-Pin Side Entry 240V Plug Top (Edison Light Globes) Requirements: Must be a licensed electrician Location: Darlinghurst, NSW Timing: Flexible – ideally this weekend Let me know if you have any questions or need photos of the lamps beforehand.

Measure buy and install blinds for my apartment bedrooms

I need help to install Stratco Handy mate garden shed approx 2.2 x 2.2 m. I have concrete slab for the shed. Shed and concrete anchors will be provided. Location is Glenfield NSW 2167.

Work to be done by licensed electrician. Install ceiling fans (2) in place of existing light fittings. The ceiling is a concrete slab. Fans only (no lights). Fans are DC with remote control.

My bathroom has a concertina door and I want to replace with a hinged door. There are hinges and door strike on the door frame from before. I also have a solid wooden door that can be used which has hinges and door lock already installed. However this door needs to be cut and reduced by 1 inch roughly to fit. Open to a carpenter getting a hollow core door if thats easier. Located in Ambarvale, NSW