Find experienced local carpenters in Australia Square

Hi so I need someone with carpentry skills to cut two pieces of material (you supply) so long as it's white, to fit flush and screw in to replace the bottom board (no gaps) and left side (will need to leave some space for the washing machine to connect through to sink pipe). Would prefer you to come and take your own measurements then cut and screw accordingly.

Need a deep tv cabinet table then shelving units over the top. I would like the shelves to be at different heights. Maybe boxed in but open to them being floating. It would ideally like solid wood. I have rough measurements. 330cm max length, depth of the tv stand/cabinet about 55cm, shelf depth 30cm, height max 280cm. In the photos the dark wood one is the more ideal shelves type so we can see the walls behind it but with the unevenness of the white ones. The grey one is more of the tv cabinet that we like coming out deeper then the shelves and a mix or drawers and cabinets

1. Supply and install architraves to 550x1150 attic hatch (painting by others) 2. Install 2no recessed handles and 1no pull handle to solid 70mm timber door (handles supplied by client) 3. Install TV hangar to masonry wall (supplied by client) 4. Install dog flap to timber door (supplied by client)

Hello. I am looking for a carpenter ( I guess) or anyone a bit handy to make a shop front higher that what it is now. Thanks.

I need to replace my bathroom wood cabinet doors that measure 49 X 27.5 cm

1. Sand ground floor hardwood timber floor and stain darker. - Living Room and Hallway approx. 17m2 - House currently vacant and no furniture. NOTE: install new timber floor to bedroom removed from this job. Will post separate ad if required. Thankyou.

2 of the 2-door cabinets, and 1 x small one door cabinet. (5 wall brackets total). Cabinets are already assembled. I have the brackets. Cement rendered brick. Asking for someone one is already familiar with mounting these specific cabinets. Thank you.

I have a drip tray for my beer system that is to long and doesn’t fit my Bench. It simply needs to be cut and welded on both sides to reduce it from 1500mm to 1250mm with a seamless finish.

The Shaving cabinet doors in the bathroom were like this when purchased. I’d like to replace with new ones but don’t know how to go about it. Might require a joinery or if possible to get off the shelf & reuse hinges? See photos Each door measures as: 450mm wide x 850mm high

(Job 1 )- There is 2 wood panels from ceiling to floor encasing down pipe that goes down the cornice of the walls, that needs replacing due to ongoing water leaks down the pipes. Looking to replace the wooden frames before painting (Job 2 )- installing 3 door handles for bathroom (with privacy lock), laundry and internal garage (assume door handles supplied) to replace the grey panels/handles pictured (2 doors out of the 3 for bathroom and laundry) with new ones like the black one picture. Please quote on Job 1 and Job 2 separately and if you can only do one, please still quote. Thanks

Need carpenter to assist with cladding install on day rates, rate is advertised hourly

I own this weaved jute and wooden stool. Unfortunately, one of the cross beams which holds up the jute snapped. I would like this stool fixed.

Welding two pieces of stainless steel

Hello, We are looking for a skilled handyman, joiner, or cabinet maker to repair a faulty drawer at our retail store, in Newtown. The Issue: A high-use tool drawer in our front counter is failing. It has become very difficult to open and close, with significant resistance, and it appears to be falling off its runners (tracks). This is a growing problem that is impacting our staff's workflow. The Job: The task is to replace the faulty drawer runners to make the drawer fully functional and smooth again. The scope of work will involve: 1. Assessing and removing the old, worn pair of drawer runners from both the drawer and the cabinet carcass. 2. Supplying and installing a new, high-quality pair of drawer runners that are the correct size and weight capacity for this high-volume drawer. 3. Correctly installing the drawer back into the cabinet. 4. Testing the drawer to ensure it opens and closes smoothly and fully without resistance. Please note: The successful contractor MUST supply the new replacement drawer runners. The cost for these materials must be included in your final offer. Requirements: - MUST have proven experience with cabinetry repairs and installing drawer runners. - You must supply all your own tools AND the new replacement runners (as mentioned above). - Ability to work cleanly and professionally within a live retail environment. - Public liability insurance is required. Location & Timing: Location: 229 King Street, Newtown, NSW 2042. When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete repair. Your offer should include all labour costs and the cost of supplying a new, durable pair of drawer runners. Thank you.

i need a carpenter today to build a small wall frame and probably install a door i can pay by hour

Remove a stain on a wooden table

We have a door that has a lip which we need to some how add a ramped piece of wood or limit the lip so that it is not a tripping hazard. Only has to be 10-15 ml and needs to go the whole way across the door way. 1.3m

Hi! My name is Amy and I (with the help of a carpenter) have designed and made a prototype of a very large frame. The frame is made from recycled wood, glass and painted plywood that slides in and out so you’re able to change out the artwork. The corners have been connected with deep tongue and grooves. It has a spherical hollowed out bit at the top so the plywood can be pulled in and out. I’m looking for a carpenter who can help me fix up the prototype by widening the bottom and top slots, but more importantly I need someone to teach me how to build the entire frame from scratch so that I’m confident building them on my own. This includes figuring out if I’ll need access to a workshop or if it’s viable for me to set up an appropriate workstation at home that can accommodate everything I need. My goal is to produce a high-quality product that can be mounted to a wall. I am an extreme beginner to carpentry but I have done a few basic things and consider myself handy. To Summarize: I’m looking for a furniture-grade carpenter who’s happy to teach. Scope: * Tidy prototype: widen the top/bottom slots the ply rides in; general fit/finish. * Teach & co-build a repeatable version from scratch (cut list, jigs, assembly order, finishes, wall-mount solution). * Advise on workspace: whether I should use a workshop in future or set up a safe home workstation. Cadence & timing: ~once a week session, evenings or weekends until done.
Location: Inner West Sydney (I can travel within reason).
Pay: Hourly or fixed per milestone + materials.
Please reply with: your website/ portfolio/ or 1–3 photos of similar work (furniture etc), your hourly rate, where you can work (workshop/home), and your next 2–3 available evenings/weekend slots. I’ll also need your ABN and a tax invoice for each session. I’m a beginner but handy; aiming for a high-quality finish. Friendly vibe, collaborative build. Thanks so much, hope to here from you soon! :)

Cut the bench so the fridge fits. Cabinets don't need to be altered. Here are the measurements- Bench opening: 600mm Cabinet height: 1455mm fridge width: 540mm fridge height: 1425mm

I am hoping to have someone sand, paint and stain a new staircase which is a mix of ash and pine. BYO materials - I am open to any views on paint/stain colours to suit the space!