Find experienced local carpenters in Dawes Point

I need a full wall in-built carpentry job done. The wall is 6.55Lx2.5H and I will require a lower section of drawers for storage, upon which the TV unit etc will go. Above that, cupboards along the wall.

I am looking to get some wallpaper hung on a wall and a half in my bedroom. Already have the wallpaper and can prepare the wall in advance, just need the wallpaper to go up and the supplies needed for that. The measurements are 5.14m width and 2.36m height - the wallpaper is manufactured using a non-woven, paste-the-wall base, and finished/trimmed with a butt-join seam. Must also be ok with me filming a little bit of the application for my instagram as it is a gifted collaboration - happy to tag your company in the post. - Due date: Needs to be done on Friday, 8 December 2023

Carpentry 1 kitchen cabinet laminated to house fridge

Hi there, I want to install a door into existing drywall. I would need you to supply and install the door. And of course measure and cut into the dry wall. I'm not sure on precise measurements and sizes so would be like to see what you recommend. Background information: Behind the dry wall is an attic space that I can use for storage. Neighbouring apartments have already installed such a door. I have example pictures of those. Flexible on dates.

Hi - I need someone to build and in-built planter box in my courtyard. It needs a wood frame and then a cut sheet of cement board or something similar to be drilled on and painted Measurements are 2.6mx0.4mx0.8m - Due date: Before Sunday, 5 February 2023

I have recently moved and the kitchen isn't fully functional. I want to add 3 wall cabinets around the rangehood, and also a full length broom cupboard as well as insert pantry drawer tower next to fridge. I would also like full length doors replaced with hinge doors. In gladesville, may need visit or video to quote accurately but an idea of costs and timeframe for build (inc materials) and install would be a good start. I like Hamptons style poly doors.

Cupboard 75 x 75 x 25 constructed and secured to wall & 2 shelves strengthened, potentially wit brackets - Due date: Before Friday, 25 November 2022

I need to get shelving done in 3 of my pre-existing wardrobes. I am looking for white Melamine shelving, 7 shelves in total cut to size and fitted. Pics of cabinet attached. Location, the ponds, sydney. Budget can be negotiated.

Assemble outdoor kitchen on rear deck and take boxes with you

I need someone who can give me a qoute to install wardrobe. I have all material ready just need experience cabinet installer with all tools required.

I am replacing a door in my house due to damage on the frame. I have ordered the same door but it needs to be painted white and length cut down slightly as the door frame is slightly shorter than standard size. - door painting (white to match the old door) - cut down of door (I will confirm dimensions) - removal of old door - install of new door

I require a melamine cabinet built for a garage. Only Qualified Cabinet Makers need apply. Measurements are; 1. Height 2.2m 2. Depth 575mm overall face of the door to outer face of the rear back panel. 3. Width 720mm overall external measurement. 4. The back, 2 x sides and top of the cabinet to be 16mm melamine. 5. No finish end panels required to the above-mentioned side panels. 6. No base to the cabinet is needed as it will be lifted and slid over the top of an existing cupboard to give a cleaner look. 7. A mid adjustable 18mm melamine shelf with the adjustable holes drilled at 1800mm - up to 1900mm. 8. An 18mm melamine door with 4 x hinges and a stainless steel 'D' shaped pull handle (located at 1.4m up from the base of the carcass, measuring 720mm wide x 2175mm allowing for the door to finish 25mm shorter than the base of the side panels giving the door ample clearance. 9. Construct cabinet and deliver to Lane Cove 2066 in NSW.

Shelf needs to be raised by a few inches and kitchen doors shortened and resprayed so fridge can fit in the cavity - Due date: 18/02/2022

Build timber floor standing track units for audio equipment. Decent, sturdy timber. Perfectly houses 19” rack gear. Get in touch to discuss dimensions

I need an 8u 19” rack unit. On legs. Made with solid timber and metal audio bracing bracket. Height around 820mm Depth around 330mm Width 19” + thickness of timber Price for 1 = $250 Price for 2 = $400

3 Mdf sheets are 900mm * 1200mm They need to be cut to 2 * 730mm H * 1200mm W and 1 * 730mm H * 180mm W Total width is 2580mm Total height of 730mm

Small outdoor deck, 6sqm approx, for undercover entertaining area. Must supply all materials, remove rubbish etc. To be constructed with quality materials and finished with natural stain. To be build over existing concrete surface.

Hello! Commercial space in Darlinghurst. Requires Gyprock four double door retail fridge as a casing. Please see photos attached for more info. There are already existing Gyprock boxes for two fridges, I would like to add a third.

Creating adjustable shelving in existing storage cupboards. Will need 3 shelves. 1. 565w, 385d 2. 915w, 385d 3. 920w, 600d (Will need a cut out in back due to gas system Cupboard need holes drilled

Hi I’m looking to get a basic treehouse built for 3 -4 year old in front of our house. Looking for someone who can build and get materials. Guessing a few hours work - and happy to be guided by you as to best way to do it. The project is on front strip so no household contact needed Cheers