Find experienced local carpenters in Leichhardt NSW

*Absolutely no idea how much this usually costs, so send through any offers.* — Accidentally damaged a part of the stained glass on my front door. The panel has one hole in it and a few cracks extending out from the hole. It is a rental property so need to pay to have it fixed to look similar to what it was before. Someone with experience restoring stained glass is essential — Unfortunately my budget is somewhat tight at the moment, but if we can work something out let me know. Happy to share my personal contact information upon messaging as it won’t allow me to post it here. Send me your quotes or any thoughts, happy to discuss. — Thank you 😊

Scope: Looking for an experienced carpenter/builder to construct a basic residential ramp and decking walkway along the side of my house. Details: Total length: ~12.1m (ramp section + level deck) Width: ~850mm Height: ~450mm Ramp to rise from ground level up to existing door height (final rise to be confirmed onsite) Continue as level decking along side of house Install simple, durable subframe + footings Finish with synthetic/composite decking boards Tie neatly into existing door threshold Ensure proper drainage fall and weatherproofing Site conditions: Narrow side access (approx. current width shown in photos) Fence boundary on one side, house wall on the other Build requirements: Solid, level, and straight finish Outdoor-rated materials (treated timber or steel frame) Suitable for regular foot traffic Slip-resistant surface Looking for: Supply + install OR labour-only (please specify) Licensed/experienced carpenter preferred Must be familiar with Australian standards for ramps

Source and install replacment horizontal wooden batten / moulding on a wood panelled wall with like for like replacement. Remove old batten / moulding. Existing batten / moulding is damaged due to previous built in wardrobe installation. Batten originally ran slightly into perpendicular wall (presumably to stiffen / support wooden panel wall). Looking for replacement rather than surface patch or cover up.

Build a small timber base to create a level platform for installing an IKEA wardrobe on an uneven timber floor in a small 1890s cottage. The floor slopes slightly with approximately 60mm height difference across the room, so the base will need to be shimmed/packed to level (similar job already completed successfully in the master bedroom). Details: Second bedroom installation Ground floor access Street parking available Room will be cleared prior to arrival Propose $150 including materials (base likely made from treated pine plank offcuts). Should be a quick job (around 1 hour) for someone experienced with basic carpentry / levelling.

Sitting or standing at a Pedestal Drill Press and drilling holes in timber at my home. 10 hours in total in one day or break it up into multiple days eg 2 days of 5 hours. Possibility of other woodwork jobs for the right person. Lots of sawdust so dust mask is supplied. Very easy work and you can listen to music or a podcast while you work and you will be working alone. Friendly dogs in the yard however if you would like them locked up this can happen. The job is outside undercover however you will need to work when it's not raining.

I have a roll bin to remove but I don’t have tools to reverse the screw top in the cupboard. I tried using my hand electric screwdriver but it doesn’t come out due to rust. Secondly, I need to remove an entire wooden table in the shed as it is taking up unecessary space. Can I get help to dispose too ?

We have a space next to our fridge where we want to add a pull out pantry. We need to build a base cabinet, then install the pull out pantry I have bought. We’ll need to add on a front door panel too. This is the pantry I am buying https://www.templeandwebster.com.au/140-170cm-Height-Adjustable-Provedore-Pull-Out-Pantry-ELIG1033.html

Build Timber Signage Timber Framesx Ply Wood with Nail gun $28 per hour

I’ve got a 2.4m length of steel which has been damaged, I need it straightened ideally with a press so I can re install. Or a new section cut, 2.4 long, 150mm wide, thickness around mm, there’s a 4 mm lip bent at a right angle on one end

Boards need replacing (part of the front completely new), rotten boards, window pane.... and other general carpentry work.

Replacing our deck and supplying the wood, nails and screws etc. the dimensions of the wood is 4430mm in length (continuous wood) 90mm width ( what’s rotten is the wood underneath - 2x4 battens) length of deck is 3030mm and the height is 20mm.

I’m looking for someone to build a compact, custom dining table to suit my small studio apartment. Key Requirements: • Size: 125cm (L) x 80cm (D) • Height: Standard dining table height (~73–75cm), to suit small ply stools • Top: Laminated plywood (see attached images for reference – similar to Eames wire table or black melamine birch ply) • Edges: Exposed ply edge preferred • Legs: Either: Powder-coated metal in black or white, Or bent wire-style legs similar to side table in images. Doesn’t need to be anything too complex. Black or white painted ply for the tabletop Optional Bonus: • If you can help source the laminated ply or offer material advice, even better • Stability is key — table must be sturdy for daily use Attachments: Images of the look I’m after - including materials, leg style and furniture it needs to pair with. Timeframe: Ideally completed within the next 2–3 weeks Budget: Open to quotes based on your materials, labour and finish

Careful removal and disposal of a timber storage bench built in to our deck and external wall.

Need new shelves needed in laundry and study, replacing existing

I need someone to come and cut the metal legs of a cabinet that I purchased to make it shorter in height. Approx. 5cm to be cut off.

Scratches on wooden floorboard

Help building a floating style desk like in the pic attached: Depth: 750cm Length: the whole thing skirting board to skirting board on either side is 2.8m. Height: full height is about 970 but thinking we can go as high as 800 ?

We need a balustrade to go around two sides of an outdoor landing (pictured). Total length is 2.3 metres with one right angle. All on level brickwork. Ideally it would match S/S balustrade (pictured) but different materials would be considered.

I need the help of a carpenter/ builder to help us: a) source materials b) install a wooden work station into a study space. We are looking for 1 long wooden plank that can seat 2 people to work from home, with a small circle cut out to funnel cords through. The area is 2m long x 1.2m deep x 1m high. The attached picture is where we want the desk - right under the windows.

I’m looking for a skilled person to assemble and install BLUM sliding shelving in my kitchen pantry. The task involves setting up 4 sliding drawers (shelves) across the pantry, using pre-purchased parts and assembly instructions provided. Each shelf space measures approximately 800mm wide x 600mm deep, with bases and fronts of the shelving needing to be cut to size. - Brand: BLUM sliding shelving - Quantity: 4 drawers to install across 4 shelves - Dimensions: Each shelf is approximately 800mm x 600mm - Requirements: Must cut both the bases and the front of each shelf to fit within the cabinet - Tools: You will need to provide your own tools for this job I’ve included as many photos as it allows , for more images, please contact me.