Find experienced local tradies in Beaconsfield NSW

Colour Acrylic Rendering needed to be applied to brick fence, approx 27m and both sides to be done.

Demolish the existing brick fence 27m, columns and capping. • Remove and dispose of all demolition material from site. • Clear and prepare the fence line ready for the new works. • Make good to adjoining surfaces disturbed during demolition. Supply and install steel for new foundation and concrete XX mpa Supply and lay brickwork to the new fence and columns. • Construct approx. ten (10) columns to 1200mm high. • Construct the infill wall to 900mm high between each column. Full colour acrylic render.

Looking for an experienced plasterer/gyprocker to complete a small repair in the ceiling around a recently installed ceiling fan in our master bedroom. As shown in the photo, there is a rectangular section of plasterboard around the ceiling fan which was cut to install a support beam for the fan. The job is to: * Patch/reinstate the plasterboard around the ceiling fan * Tape/set/plaster as required * Sand smooth and flush with the existing ceiling * Leave the repaired area ready for us to prime and paint ourselves * Protect the bedroom/flooring from dust and clean up afterwards Ceiling height is approximately 3.9 metres, so you’ll need to provide your own suitable high ladder/platform/access equipment. Please include all plastering materials and access equipment in your quote. No painting required. Looking for a neat, professional finish with the repaired area flush and ready for painting.

Damaged plasterboard ceiling in bathroom and corner of lounge which needs fixing and replacing Bath room - 140cm x 150cm Lounge - 100cm x 170cm

Task Description: Hi, I need a professional handyman or plasterer to repair a hole in the plasterboard/gyprock ceiling. Size of the hole: Approx. 40cm x 40cm. Location: Rosebery, NSW 2018. Requirements: Cut back, install a new piece of gyprock, plaster, and sand it back to a smooth, paint-ready finish (Base coat + Top coat). Materials: You will need to supply the gyprock, joint tape, compound, and all necessary tools. Paint match Timing: Must be completed on either Wednesday 17th June or Thursday 18th June. Please let me know your availability when offering. Looking for someone with good reviews and experience in gyprock/plastering. Thanks!

Gyprock the underside of our bulkhead as it was removed when renovating our kitchen. Make flush with the other corners of the bulkhead.

Patch Render brick wall in kitchen in preparation for splash back install. Needs to be same thickness as exisiting render

I need an experienced person (or team) to carefully dismantle and reassemble a 3-person Found Space sauna and move it literally next door — about 20 steps away. The job needs to be done ASAP. Here’s what’s involved (essentially the reverse of this video: YouTube link): https://www.youtube.com/watch?v=jgsmWnB5Xfc Steps: • Remove the glass door first (must be done before anything else) • Disconnect all cables from the control box that run through wall cavities • Unscrew the roof • Unscrew and remove front heaters • Lift off the roof • Remove the glass panels • Disassemble the bench and under-bench heaters • Unscrew and separate the back panel You’ll then need to reassemble it in the adjacent room, ensuring it’s level, stable, and the electrical components are correctly reconnected. Requirements: • Must have experience assembling or moving infrared or similar saunas • Must have your own tools and basic electrical understanding • Ability to handle glass safely This is a quick but delicate job — ideal for someone who’s handy with furniture or appliance assembly and available immediately.

Mount Hisense 41” to gyprock wall to standard bracket.

Need someone to source, cut and install the appropriate material for our west facing balcony awning (non-retractable). Structure of awning appears intact, is just missing material. Approx dimensions are 220cm wide by 150cm long. - Due date: Flexible