Find a local network troubleshooter near you

We need to manage cables in our computer rooms. Network cables, power cables to computers. We need someone who has experience in cable management

I’d like to have an existing network point reconnected to my NBN service. The point was previously disconnected so it could be used with a different internet service. I’m now using NBN and would like it restored to its original connection.

We need an experienced IT technician or handy person to fix a loose network connection in our office boardroom. The blue network cable connecting the boardroom computer is loose in the wall/floor socket, causing intermittent connectivity issues. You will need to inspect the socket and the cable clip, and either re-terminate the cable with a new RJ45 connector or replace/repair the wall plate/socket to ensure a secure, stable connection.

We are looking for someone with basic IT/networking knowledge to attend a site in Wagga Wagga and help restore the network connection. The site is using a UniFi Gateway, network switch and multiple UniFi Access Points (APs). The main tasks will include: Restart/reboot the UniFi Gateway Make sure the Gateway is correctly connected between the modem and the network switch Check and reconnect network cables as required Restore the Gateway/network configuration if necessary Make sure the UniFi Gateway can detect the network switch again Make sure all UniFi Access Points are detected and come back online Confirm that the internet and Wi-Fi are working normally after the work is completed There may be some cabling work required, so please bring basic network tools and spare Ethernet/Cat6 cables if available. Someone with experience in UniFi/Ubiquiti, routers, switches, Wi-Fi networks or general IT support would be preferred.

Add 3 x TP-Link RE815XE extenders to TP-Link VX420-G2h modem/router for EasyMesh network. Check that 2 TV, several Google Home devices, and Tapo doorbell/camera are all connected to Mesh network.

We have a shop at Eastland Shopping Centre. We are getting a drop out of internet at one point- Telstra needs to check if that port cable from back office to counter is not damaged. Their comment is as below: “We need cabling checked from ntu to the cisco router, coving ntu to patch point > internal patch point to patch point > patch point to cisco router. We believe the fault to be between the internal patch points. Collecting photos of these connections could also be helpful.” They want electricians to check and confirm if that is not damaged We also have multiple port going on if one is damaged Shop open 9:00 to 5:00 everyday

Set Up Wi-Fi Access Points Throughout 4-Storey House We have just moved into a 4-storey house and currently have the NBN/Wi-Fi router on the first floor. The Wi-Fi signal doesn’t reach the upper floors properly. The house appears to be smart-wired, with Ethernet/network ports throughout the house and in multiple rooms. I’m looking for someone experienced with home networking/Wi-Fi access points to: * Check how the existing Ethernet/network cabling is connected * Identify where the cables terminate * Connect/configure the existing network ports * Set up Wi-Fi access points or mesh nodes on the upper floors * Configure everything so we have reliable Wi-Fi coverage throughout the house * Advise on any additional equipment needed (switch, access points, etc.) We use Telstra NBN. Ideally looking for someone with experience in networking, Ethernet cabling and Wi-Fi access point installation, rather than just general IT support. Happy to send photos of the existing ports/equipment before the job.

We need an experienced Linux / networking engineer in Brisbane to recover and configure an existing Ubuntu ML server. The server is physically accessible, but we currently have no login credentials and no remote access. You are welcome to take the server away to work on it offsite, then return it once configured. Scope: * Safely regain administrative access to Ubuntu and reset the local password if required. * Preserve the existing server installation, data and ML environment. * Check networking, SSH and firewall configuration. * Review and back up the existing Headscale configuration. * Update Headscale to a current supported version. * Reconnect the server to our existing Headscale/Tailscale private network. * Establish reliable remote administrative access. * Return/reconnect the server and configure our router as required. * Check routing, NAT, DNS and firewall settings. * Test connectivity and confirm the setup survives restarts. * Provide brief notes on changes made. Please do not reinstall, reformat or rebuild the server without discussing it with us first. If disk encryption or another issue prevents safe access recovery, stop and advise before making destructive changes. Experience required: Ubuntu/Linux server administration, GRUB/password recovery, Headscale/Tailscale, WireGuard, SSH, routing, DNS, NAT, firewalls and router configuration. This is not a general PC support task. We need someone comfortable diagnosing and recovering an existing Linux server.

The network needs tweaking as some computers dont connect plus transfer of some data between computers

Location: Westfield Garden City, Booragoon WA 6154 Date & Time: Urgent / ASAP (Scheduled for Tuesday, 22 September 2026) Check physical and logical status of the store's Access Point (AP). Verify all network patching ensure router, switch, and AP cables are inserted into the correct, designated ports. Coordinate directly with the remote support team (RSD) via Microsoft Teams to run line checks. Required Tools & Equipment: Laptop with active internet access (hotspot) & Microsoft Teams installed. Console cable (RJ45 to USB / Serial). Spare Cat5e/Cat6 Ethernet cables. Basic IT hand tools.

My system (Win11) frequently disconnects or slows down when connecting to Internet over WiFi. I'm not sure if there is some DNS/network settings that needs to be changed for optimum speeds or any changes to WiFi router. Same WiFi works well connected via mobile.

We’re a small business looking for a a reliable local IT/network technician for an initial job, a larger network upgrade, and potentially ongoing IT support as required. 1) INITIAL JOB - UNIFI ACCESS POINT - Check our existing UniFi Access Point, does not seem have power despite power cycling Switch. Figure out what is happening and make it work. - I'm trying to install a 2nd Unifi Access Point (via a second switch, see photo). However, when I plug it in it causes PoE power on our Switch to cut out. Figure what is happening and make the 2nd Access Point work. - Background: CISCO Switch, Ubiquiti Access Point - Additional hardware or cabling: Separately approved, since the fault could require replacement equipment. 2) Separate quote for other jobs if want - not mandatory, but preferred A) While onsite, assess and separately quote - Upgrading our wired office network from 1 GbE to 2.5 GbE for faster internal LAN and NAS file transfers. - Upgrading the network switch and tidying/reorganising the network cabinet and patch panel as needed. B) Set up NAS properly for backup for our other computers - we already have a NAS

When my home was built CAT5 cabling was installed. It runs to each room from a hub under the stairs. We've never used it. We find though that our Telstra modem (new), which broadcasts auto does not work well in some rooms. We have 2-3 Telstra boosters. They though don't help. Eager for someone to check and prep the LAN to allow it to work - no cabling needed. Just link it to the modem. Also to check the auto 2.4 and 5 broadcast or set up two bands.

Need someone to attach for RJ 45 connections to new cat six cabling runs, test and confirm working. Job located in Hamilton hill

Need someone who understands unifi home network. Previous owners left cameras, smart doorbell, wifi spots, and a unifi cloud key gen 2+ (and all cabling). I just need to know what (if anything) else to buy, and for it to all be set up. I have a router provided by my isp and a couple of cheap tp link switches if they are of any use.

Must have Networking degree or certifications on enterprise grade LAN networks. The current router is Aruba with TPLink APs that are unable to add new users. The network is also connected to printers, VPN config etc. so DDNS config experience is must to ensure existing infra is not broken. We need to check why new users are unable to join the network and resolve the issue. You should have your own equipment to connect with router/ switch or modem.

"I have two Ubiquiti ceiling access points, a 16-port UniFi PoE switch, and an Optus Gen 2 modem. The Ethernet cables are already installed to the ceiling. I need the APs mounted, the switch installed, everything configured in UniFi, firmware updated, Wi-Fi optimised, and tested." The upstairs AP is accessible with a small ladder. The downstairs installation need a large ladder as the ceiling height is 5m. All cables are in place

Check whether existing network cabling can be used and/or improve the effectiveness of a home WiFi network. Set up home working. Connect Surface laptop to docking station and then monitor plus peripherals.

I’m looking for a registered data cabler to install wired Ethernet backhaul for my home mesh Wi-Fi system. The NBN modem and main mesh router are located in the lounge. I need two separate Cat6 Ethernet cable runs installed from the main router location: ~ One cable run to a mesh Wi-Fi point near the front door ~ Two connections to the study - one for the mesh Wi-Fi point and one for a desktop PC The job should include: ~ Three Cat6 Ethernet cable runs ~ Three Cat6 Ethernet outlets at the lounge/main-router location ~ One Cat6 Ethernet outlet near the front door ~ Two Cat6 Ethernet outlets in the study ~ Cat6-rated wall plates, outlets and terminations ~ Testing of all three cable runs after installation ~ Confirmation that the two mesh points are connected using wired Ethernet backhaul Please include all cabling, wall plates, connectors, labour and testing in your quote. I estimate it's probably 20 to 30-meter cable runs from the lounge/main-router location. Only registered or appropriately qualified data cablers, please. Location: Greenvale House type: Single-storey (medium-sized home) Roof access: Available

We have NBN network, with a google nest mesh system. We have issues getting the printer connected, and want to be able to print, scan, etc from desktop computers to desktop computers. Brother MFC unit.