Find a local network troubleshooter in WA

Needing a cat6 network cable/port installed according to safety regulations from NBN box in one bedroom to other side of the house in another bedroom. Or suggestion on correct cabling and I can run a cable myself.

Hi there, We are looking for an experienced IT technician or skilled handyman to complete a hardware re-configuration and network troubleshooting task at our retail store. Part 1: Monitor & VESA Bracket Setup • Current Setup: 4 x 27-inch monitors mounted on 2 dual-monitor mounts at the front POS counter. • Scope of Work: • Remove 2 customer-facing monitors. • Replace the 2 dual-monitor mounts with 2 single-monitor mounts (provided by us). • Reinstall and secure the 2 staff-facing monitors onto the new single-monitor mounts. • Tidy up and neatly organise all cabling/wiring. • Leave the removed monitors safely onsite. • Dispose of the old, removed dual-monitor mounts. Part 2: CCTV Network Troubleshooting • Our CCTV system has lost its network connection (it is currently offline and cannot be accessed remotely or locally). • You will need to diagnose the network issue (check cables, IP configuration, switch, or router settings) and restore network connectivity for the CCTV system. Requirements: • Must have your own tools (screwdrivers, basic networking tools, cable ties). • Experience with VESA monitor installations and IT/CCTV network troubleshooting is essential. Location & Time: • Location: Oscar Wylee Midland • Time: ASAP Please provide your total quote including all labor and travel costs. Thank you!

I’d like to have an existing network point reconnected to my NBN service. The point was previously disconnected so it could be used with a different internet service. I’m now using NBN and would like it restored to its original connection.

The network needs tweaking as some computers dont connect plus transfer of some data between computers

Location: Westfield Garden City, Booragoon WA 6154 Date & Time: Urgent / ASAP (Scheduled for Tuesday, 22 September 2026) Check physical and logical status of the store's Access Point (AP). Verify all network patching ensure router, switch, and AP cables are inserted into the correct, designated ports. Coordinate directly with the remote support team (RSD) via Microsoft Teams to run line checks. Required Tools & Equipment: Laptop with active internet access (hotspot) & Microsoft Teams installed. Console cable (RJ45 to USB / Serial). Spare Cat5e/Cat6 Ethernet cables. Basic IT hand tools.

Internet to tv is not working

I'm looking for an experienced IT technician to troubleshoot and resolve ongoing issues with my home network and Windows PCs. Current Network Setup: ISP: iiNet NBN FTTP (850/90 Mbps, PPPoE). Router: Ubiquiti Cloud Gateway Max (UCG-Max). Switches: 2 × Ubiquiti Flex Mini 2.5G. Wi-Fi: Eero Pro 7 (Bridge Mode). CAT6 Ethernet cabling throughout the house. Two Windows PCs connected via Ethernet, including one with a Realtek 2.5Gb adapter. UCG-Max manages DHCP and IP reservations. Main Issues: Windows frequently reports duplicate IP addresses, even when UniFi shows only one device using the affected IP. PCs sometimes receive incorrect IP addresses despite DHCP reservations. Internet connectivity is not always available immediately after starting or waking the devices. Devices occasionally have a valid IP address but no internet access. Similar problems existed with my previous TP-Link equipment, which was replaced with UniFi hardware. What I Need: A comprehensive network assessment to identify and permanently resolve these issues, including: DHCP, IP conflicts and network configuration. Router, switches, Eero Bridge Mode and Ethernet cabling. Windows network settings and Realtek drivers. PPPoE, DNS and MTU configuration. Network optimisation for stable, low-latency gaming (iRacing), Discord and streaming. My goal is to have a reliable network where all devices receive their correct IP addresses and connect to the internet immediately, without manual intervention. I would prefer an on-site visit to identify the root cause and implement a permanent solution. Could you please confirm your availability in Perth, estimated cost?

NBN port in house not working well, networking problem

Need someone to attach for RJ 45 connections to new cat six cabling runs, test and confirm working. Job located in Hamilton hill

Setup of home network, configuration of all the settings and ensuring network is safe and secure. Looking for someone with good understanding of cyber security and able to provide ongoing assistance and possibly will need network setup for a local small business.

Task Description: I'm looking for an experienced home networking technician to configure and optimise my home network. The job includes: Configure and optimise my existing home network. Set up and test two home offices with reliable wired and wireless connections. Configure my TP-Link Archer router, switches, and mesh Wi-Fi system. Optimise internet coverage throughout the house using mesh access points. Ensure devices roam seamlessly between mesh nodes. Configure the network for maximum speed, stability, and reliability. Check and troubleshoot any existing network issues. Advise on the best placement of mesh units and whether any additional hardware is required. Ensure smart home devices, printers, and other network equipment remain connected and functioning correctly. If possible, assist with my NVR/security camera network configuration. Current Equipment: TP-Link Archer AX3000 Router TP-Link Deco E4 Mesh Wi-Fi (multiple units) TP-Link RE815XE Wi-Fi Extender Network switches NVR with PoE security cameras Wired Ethernet throughout the home I'm looking for someone with experience in: Home networking TP-Link products Mesh Wi-Fi systems Ethernet networking Security camera networking (preferred) Please let me know your experience with similar setups and your availability.

We are looking for a Desktop / Network Engineer for aJoondalup Location. Scope of Work: • Desktop support • Troubleshooting routers and switches • General cable fixing and management • POS troubleshooting • Basic onsite technical support   Details: • Pay: $30–$40 per hour • Timing: Flexible (ASAP preferred) • Requirements: Basic tools and relevant experience

I have a netgear xr1000 router which has 2 unifi wireless access points attached. I need to create a seperate 2.4ghz network for certain devices but I don't know how to do that with the unifi access points

The internet company is Superloop. NBN has already sent someone to install the network box, but it's still not working. I've tried calling Superloop but no one answers. I'd like to find someone to help me fix this.

Hi All. Are there any cablers out there that can add a network port on either side of the wall and run a cable to the other side of this wall. 2x network ports 1 cat6 cable. Either side of cavity wall. PowerPoints on either side already.

Need to extend high speed 5g coverage to the front of the house

I have a couple of network points in my house already but need one put into a spare bedroom

After several attempts to connect my new printer to home wifi router, I've failed over & over! Looked through the manual, still no luck!

New house, need TV, soundbar, computers connected to wifi

I need an experienced IT/Network technician to help with my home network in Bassendean / Perth, WA. My setup is: • TP-Link or Wi-Fi Max Modem (HWG2025) as the main router • Eero in bridge mode • A switch distributing LAN to multiple PCs • One PC (Windows 11) that needs the network adapter restarted multiple times before it connects to the internet I’d like someone who can: ✔ Diagnose and fix my home network configuration ✔ Ensure stable wired and Wi-Fi connectivity ✔ Configure routers/switches properly ✔ Test and confirm everything is stable before leaving