Find a professional local carpenter in London

Fitted corner cupboard, needs disassembling to fit slim dishwasher, dishwasher needs plumbing in and hole drilled through cabinet to fit plug.

Looking for someone to help finish my IKEA kitchen insulation. Ideally joiner or someone experience building kitchens. These jobs need done, and need someome with their own tools Kick plinth Adjust 4 upboard door fronts not aligned Fit rest of doors ...4 Fit washing machine End panels Box in where old washing machine went

1) My stairs have been stripped to bare wood and as it's creaky, a few steps needs to be nailed/fixed to eliminate the noise – there are 13 steps in total. 2) I would like to see if it's possible to sand the steps to natural wood and have a runner put in (leftover grey carpet) so this work requires an experienced specialist. 3) Also, I need the stair hand rail installed, the kit is already delivered to the property.

Looking for a builder/joiner to install a custom half-height external door to enclose an under-stairs recessed area outside my property. The door would: * Be fitted between two masonry walls * Sit at the front of the recess under exterior stairs * Be outward opening * Matte black finish preferred * Weather-resistant and suitable for outdoor use I’m open to composite, timber or steel depending on recommendation and price. Would ideally like someone who can measure, supply and install. Please message me if interested or if you can recommend someone experienced with custom exterior doors/joinery work.

We need to make the cooker hood canopy (115cm wide) and arched wall cabinet (just the top part) 130cm wide in kitchen alcove. Both marked with green highlighter in photos

Carpenter / joiner required to make 94 custom timber roof dentils Looking for a carpenter to manufacture 94 decorative roof dentils. The dentils have a curved profile (see attached photos) and come in four different dimensions: 69* 300x140x100mm 7* 280x140x100mm 4* 400x140x100mm 14* 510x140x100mm These must be made from solid hardwood, primed and finished in a quality, weatherproof outdoor white paint. Delivered to site in Barnes SW13 London. Looking for best price and turnaround. Budget: £1200. Other parts will be required as well throughout the project and other sites.

Carpenter required to make 94 custom timber roof dentils Looking for a carpenter to manufacture 94 decorative roof dentils. The dentils have a curved profile (see attached photos) and come in four different dimensions: 69* 300x140x100mm 7* 280x140x100mm 4* 400x140x100mm 14* 510x140x100mm These must be made from solid timber and finished in a quality, weatherproof outdoor white paint. Delivered to site in Barnes SW13 London. Looking for best price and turnaround. Other parts will be required as well throughout the project.

Need to lay out a wallpaper in a small bathroom. Two sections: a slanted wall and a slanted piece of joinery with doors etc. 200cm in width total. See pictures.

Analysis of carpentry and joinery jobs around home

I recently had some shelves, cabinets and a faux fireplace made from MDF. I just need a few small tweaks to the job like reattaching a plug socket to the wall (hole is too big behind the plug) , and creating a back panel for the fireplace

I there. I have two internal doors that need fitting. We have the hinges, doors, and locks. The doors are new and don't have the grooves for hinges/ lock cut out.

I would like to hire a carpenter/joiner to build the wooden base for this seating. There will be a radiator housed under it so it needs gaps/slits to let the heat through. I want the base to look like in the photo. Rough dimensions are in the photo. Price would need to include materials.

Experienced and excellent Joiner, Carpenter required for High End finish of 4 wardrobes, 1 book shelf, 1 shoe rack. # Min 20 years experience # Refs and portfolios required Strictly no time wasters Top money for the right person

The cupboards are already assembled.3 kitchen lower cupboards to be mounted and a waterfall counter. A sink hole to be cut along with hob to cut. 45 angle counter cut rather than end strips

Veneer application to spiral staircase wall (curved MDF substrate already fitted). Area approx 10–12 m². MDF is smooth(ish) but needs further smoothing/filling and edge prep. Require seamless professional finish with joins kept minimal/hidden. Veneer to be stained after application. Veneer provided by me. This is a job for someone that enjoys intricate work.

Replacing 4 internal doors and frames. make adjustments to build in wardrobe

Building L shape kitchen breakfast bar. Build banquette seating. Replace radiator to smaller radiator Labour only.

Below are the deficiency noted by the local authority for my HMO compliance: - Smoke seal partly painted over, which reduces its flexibility, impeding its ability to block smoke. - Ill-fitting bedroom door with gaps of more than 4mm or less than 2mm between the fire door and the frame. This can compromise the fire door integrity by allowing smoke and fire to pass through more easily (The 2–4 mm gap applies to the two vertical sides and the top edge — this ensures the intumescent strips and smoke seals will perform properly in a fire. Too large a gap (>4 mm) may allow smoke and fire to pass through. Too small a gap (<2 mm) can cause the door to stick or not close properly. - Thumb turn lock not available. - Door doesn’t self-close. Severity Severe Below are the sugested remedy - Appoint a reputable fire door remedial service provider to assess and carry out the necessary repairs. The smoke seal must be fully replaced – The smoke seal must be certified UKCA/CE. - Adjust the door so that the gap is between 2mm and 4mm. Test and leave in proper working order. - Install a lock to the bedroom that can be opened from the inside without the use of a key, i.e. a thumb turn lock - Overhead self-closer: Inspect and adjust the tension and closing speed. Ensure that the door always self-closes. I am therefore looking for a professional who knows how to accomplish the above for 8 doors.

Staircase restoration, sanding, stripping, skirting

Hi, I’m looking for an experienced joiner/carpenter to help with 3 internal doors in my flat in SE1. Details: • 1 × bedroom door • 2 × storage cupboard doors • The existing doors have been removed • The openings are non-standard sizes What I need initially: • A site visit to accurately measure all openings (top/middle/bottom) • Advice on door sizes & clearances • A quote for supply + fitting of plain internal doors • No obligation to proceed after measuring Important: • Looking for someone with experience fitting internal doors (not general handyman only) • Please confirm if you charge a call-out fee • Photos/examples of similar door work appreciated This task is for measurement + quote first, with fitting to follow if we agree on price. Thanks!